Wiesbaden/Projekte/Simeonhaus: Unterschied zwischen den Versionen
MAGIC (Diskussion | Beiträge) (add fans + UPS) |
N0trax (Diskussion | Beiträge) |
||
(69 dazwischenliegende Versionen von 5 Benutzern werden nicht angezeigt) | |||
Zeile 22: | Zeile 22: | ||
==aktueller Stand== | ==aktueller Stand== | ||
− | * | + | * 2017-0x-0x | 01 Pers. X xx h > Abbau |
− | * 2015-12-19 > Richtfunk zwischen Haus | + | * 2016-06-12 | 01 Pers. X 01 h > Vorbereitung Anschluss Hausmeister / Aufräumarbeiten |
+ | * 2016-05-30 | 01 Pers. X 01 h > Router eingesammelt von Hilforganisationen | ||
+ | * 2016-05-18 | 02 Pers. X 03 h > Router eingesammelt | ||
+ | * 2016-05-11 | 02 Pers. X 01 h > Richtfunkknoten neugestartet | ||
+ | * 2016-05-08 | 03 Pers. X 06 h > Richtfunk zwischen Haus C und Haus D installiert, Router verteilt | ||
+ | * 2016-05-06 | 01 Pers. X 03 h > Richtfunk zwischen Haus C und Haus D vorbereitet | ||
+ | * 2016-04-17 | 04 Pers. X 05 h > Router geflasht, Router verteilt | ||
+ | * 2016-04-10 | 01 Pers. X 01 h > Server + VM umkonfiguriert (Open vSwitch) | ||
+ | * 2016-03-15 | 02 Pers. X 02 h > Richtfunkantenne Haus E neugestartet (Umzug war abgesagt) | ||
+ | * 2016-03-01 | 02 Pers. X 03 h > Knoten im rechten Flügel Haus D aufgestellt | ||
+ | * 2016-02-20 > Server installiert | ||
+ | * 2016-02-18 > Router geflasht | ||
+ | * 2016-02-14 > Server aufgebaut | ||
+ | * 2016-02-13 > Server aufgebaut | ||
+ | * 2016-01-09 > Haus C nach WLAN-Löcher durchsucht und behoben, Haus B z.T. mit Knoten versorgt | ||
+ | * 2015-12-19 > Richtfunk zwischen Haus B und Haus E installiert | ||
* 2015-12-12 > Knoten im 2. Stock Haus C aufgestellt | * 2015-12-12 > Knoten im 2. Stock Haus C aufgestellt | ||
* 2015-12-06 > Standort Opelbad funkt | * 2015-12-06 > Standort Opelbad funkt | ||
Zeile 37: | Zeile 52: | ||
'''Folgende Richtlinien sollen gelten:''' | '''Folgende Richtlinien sollen gelten:''' | ||
* VLAN 5 = Freifunk Client Netz | * VLAN 5 = Freifunk Client Netz | ||
− | * VLANs 100- | + | * VLANs 50-70 = Untagged VLANs für Mesh-On-Lan/-Wan |
+ | * VLANs 100-110 = Tagged VLANs für Richtfunk | ||
* CPE210/CPE510 = Mesh-On-LAN/-WAN + PoE Passthrough aktiviert | * CPE210/CPE510 = Mesh-On-LAN/-WAN + PoE Passthrough aktiviert | ||
Zeile 53: | Zeile 69: | ||
− | === | + | ===Standorts-Spinnen=== |
Geräte, die an zentralen Sternpunkten Batman Mesh per LAN-Kabel i.d.R. via VLANs verteilen. | Geräte, die an zentralen Sternpunkten Batman Mesh per LAN-Kabel i.d.R. via VLANs verteilen. | ||
Zeile 64: | Zeile 80: | ||
! Routertyp | ! Routertyp | ||
! WLAN (2,4 - 5) | ! WLAN (2,4 - 5) | ||
+ | ! Port | ||
+ | ! Gerät | ||
! Port | ! Port | ||
! Gerät | ! Gerät | ||
Zeile 77: | Zeile 95: | ||
|- | |- | ||
| 01. | | 01. | ||
− | | Sim- | + | | Sim-Papagei |
| Aufzugsraum - Haus B/C | | Aufzugsraum - Haus B/C | ||
− | | | + | | HP ProLiant DL380 G5 |
− | | | + | | - |
− | | | + | | 1 (eth2) |
− | | | + | | Switch Port 1 |
− | | | + | | 2 (eth5) |
− | | | + | | Out of Band Management |
− | | | + | | 3 (eth4) |
− | | | + | | Switch Port 5 |
− | | | + | | 4 (eth3) |
− | | | + | | Switch Port 4 |
− | | | + | | 5 (eth1) |
− | | | + | | Switch Port 3 |
+ | | 6 (eth0) | ||
+ | | Switch Port 2 | ||
| Batman Spider Haus B/C | | Batman Spider Haus B/C | ||
|- | |- | ||
| 02. | | 02. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
| Sim-Schneeammer | | Sim-Schneeammer | ||
| Dach - Haus E | | Dach - Haus E | ||
Zeile 123: | Zeile 126: | ||
| 3 103U | | 3 103U | ||
| Felsenschwalbe | | Felsenschwalbe | ||
+ | | 4 104U | ||
+ | | Mehlschwalbe | ||
+ | | - | ||
+ | | - | ||
+ | | Batman Spider Haus E | ||
+ | |- | ||
+ | | 03. | ||
+ | | Sim-Gruenfink | ||
+ | | Dach - Haus D | ||
+ | | WDR3600 v1.1 | ||
+ | | C06/M00 - C00/M00 | ||
+ | | WAN 2u | ||
+ | | frei | ||
+ | | 1 5T 103T | ||
+ | | NSM5>HausB/C | ||
+ | | 2 10U | ||
+ | | Schieferdrossel | ||
+ | | 3 11U | ||
+ | | frei | ||
| 4 5U | | 4 5U | ||
| frei | | frei | ||
− | | Batman Spider Haus E | + | | - |
+ | | - | ||
+ | | Batman Spider Haus D | ||
+ | |} | ||
+ | |||
+ | ===Switch=== | ||
+ | |||
+ | Portbelegung des [https://www.ubnt.com/edgemax/edgeswitch/ Ubiquiti EdgeSwitch ES-24-250W], dass im Rack verbaut ist. | ||
+ | |||
+ | {| class="wikitable sortable" | ||
+ | |- | ||
+ | ! style="text-align:center"| Port | ||
+ | ! VLANs | ||
+ | ! Tag-Modi | ||
+ | ! Gerät | ||
+ | ! PoE-Status | ||
+ | |- | ||
+ | | 1 | ||
+ | | 5 | ||
+ | | untagged | ||
+ | | Server Port 1 eth2 | ||
+ | | disabled | ||
+ | |- | ||
+ | | 2 | ||
+ | | 102 | ||
+ | | tagged | ||
+ | | Server Port 6 eth0 | ||
+ | | disabled | ||
+ | |- | ||
+ | | 3 | ||
+ | | 101,103 | ||
+ | | tagged | ||
+ | | Server Port 5 eth1 | ||
+ | | disabled | ||
+ | |- | ||
+ | | 4 | ||
+ | | 50-60 | ||
+ | | tagged | ||
+ | | Server Port 4 eth3 | ||
+ | | disabled | ||
+ | |- | ||
+ | | 5 | ||
+ | | 61-70 | ||
+ | | tagged | ||
+ | | Server Port 3 eth4 | ||
+ | | disabled | ||
+ | |- | ||
+ | | 6 | ||
+ | | 5, 101 | ||
+ | | tagged | ||
+ | | NanoStation M5 -> Haus E | ||
+ | | 24V passive | ||
+ | |- | ||
+ | | 7 | ||
+ | | 5, 102 | ||
+ | | tagged | ||
+ | | PowerBeam 5AC 500 -> HSK | ||
+ | | 24V passive | ||
+ | |- | ||
+ | | 8 | ||
+ | | 50 | ||
+ | | untagged | ||
+ | | Sim-Nachtigall | ||
+ | | 24V passive | ||
+ | |- | ||
+ | | 9 | ||
+ | | 51 | ||
+ | | untagged | ||
+ | | Sim-Feldlerche | ||
+ | | 24V passive | ||
+ | |- | ||
+ | | 10 | ||
+ | | 52 | ||
+ | | untagged | ||
+ | | Sim-Amsel | ||
+ | | 24V passive | ||
+ | |- | ||
+ | | 11 | ||
+ | | 53 | ||
+ | | untagged | ||
+ | | Sim-Spatz | ||
+ | | 24V passive | ||
+ | |- | ||
+ | | 12 | ||
+ | | 54 | ||
+ | | untagged | ||
+ | | Sim-Spornammer | ||
+ | | 24V passive | ||
+ | |- | ||
+ | | 13 | ||
+ | | 55 | ||
+ | | untagged | ||
+ | | Sim-Fink | ||
+ | | 24V passive | ||
+ | |- | ||
+ | | 14 | ||
+ | | 56 | ||
+ | | untagged | ||
+ | | Sim-Kleiber | ||
+ | | 24V passive | ||
+ | |- | ||
+ | | 15 | ||
+ | | 57 | ||
+ | | untagged | ||
+ | | Sim-Katzendrossel | ||
+ | | 24V passive | ||
+ | |- | ||
+ | | 16 | ||
+ | | 58 | ||
+ | | untagged | ||
+ | | Meshing available | ||
+ | | 24V passive | ||
+ | |- | ||
+ | | 17 | ||
+ | | 59 | ||
+ | | untagged | ||
+ | | Meshing available | ||
+ | | 24V passive | ||
+ | |- | ||
+ | | 18 | ||
+ | | 60 | ||
+ | | untagged | ||
+ | | Meshing available | ||
+ | | 24V passive | ||
+ | |- | ||
+ | | 19 | ||
+ | | 5,103 | ||
+ | | tagged | ||
+ | | NanoStation M5 -> Haus D | ||
+ | | 24V passive | ||
+ | |- | ||
+ | | 20 | ||
+ | | 62 | ||
+ | | untagged | ||
+ | | Sim-Elster | ||
+ | | disabled | ||
+ | |- | ||
+ | | 21 | ||
+ | | 63 | ||
+ | | untagged | ||
+ | | Sim-Saatkraehe | ||
+ | | disabled | ||
+ | |- | ||
+ | | 22 | ||
+ | | 5 | ||
+ | | untagged | ||
+ | | Out of Band Management | ||
+ | | disabled | ||
+ | |- | ||
+ | | 23 | ||
+ | | 5 | ||
+ | | untagged | ||
+ | | integrated Lights-Out (iLO) | ||
+ | | disabled | ||
+ | |- | ||
+ | | 24 | ||
+ | | 5 | ||
+ | | untagged | ||
+ | | Out of Band Management | ||
+ | | disabled | ||
+ | |- | ||
|} | |} | ||
Zeile 142: | Zeile 324: | ||
| sim-sueden | | sim-sueden | ||
| Dach - Haus B/C | | Dach - Haus B/C | ||
− | | | + | | PowerBeam 5AC 500 |
| HSK | | HSK | ||
| Freifunk Uplink #1 | | Freifunk Uplink #1 | ||
Zeile 148: | Zeile 330: | ||
| 02. | | 02. | ||
| ffmwu-sim-haus-b | | ffmwu-sim-haus-b | ||
− | | Dach - Haus B | + | | Dach - Haus B |
| NSM5 | | NSM5 | ||
| Haus E | | Haus E | ||
Zeile 157: | Zeile 339: | ||
| Dach - Haus E | | Dach - Haus E | ||
| NSM5 | | NSM5 | ||
− | | Haus B | + | | Haus B |
+ | | | ||
+ | |- | ||
+ | | 04. | ||
+ | | ffmwu-sim-haus-c | ||
+ | | Dach - Haus C | ||
+ | | NSM5 | ||
+ | | Haus D | ||
+ | | | ||
+ | |- | ||
+ | | 05. | ||
+ | | ffmwu-sim-haus-d | ||
+ | | Dach - Haus D | ||
+ | | NSM5 | ||
+ | | Haus C | ||
| | | | ||
|} | |} | ||
+ | |||
===Mesh-Fänger=== | ===Mesh-Fänger=== | ||
CPE510 Geräte, die auf die Gebäudefassaden Batman-Mesh "strahlen", um die Mesh-Only-Knoten (WDR3600er) "einzufangen". | CPE510 Geräte, die auf die Gebäudefassaden Batman-Mesh "strahlen", um die Mesh-Only-Knoten (WDR3600er) "einzufangen". | ||
Zeile 180: | Zeile 377: | ||
| CPE510 v1.0 | | CPE510 v1.0 | ||
| N/A | | N/A | ||
− | | | + | | C0/M44 |
| Mesh-On-Lan/-Wan; PoE-Passthrough | | Mesh-On-Lan/-Wan; PoE-Passthrough | ||
|- | |- | ||
Zeile 189: | Zeile 386: | ||
| CPE510 v1.0 | | CPE510 v1.0 | ||
| N/A | | N/A | ||
− | | | + | | C0/M44 |
| Mesh-On-Lan/-Wan; PoE-Passthrough | | Mesh-On-Lan/-Wan; PoE-Passthrough | ||
|- | |- | ||
Zeile 198: | Zeile 395: | ||
| CPE510 v1.0 | | CPE510 v1.0 | ||
| N/A | | N/A | ||
− | | | + | | C0/M44 |
| Mesh-On-Lan/-Wan; PoE-Passthrough | | Mesh-On-Lan/-Wan; PoE-Passthrough | ||
|- | |- | ||
| 04. | | 04. | ||
− | | Sim- | + | | Sim-Katzendrossel |
− | | Dach - Haus | + | | Dach - Haus B/C |
| Haus B - links | | Haus B - links | ||
| CPE510 v1.0 | | CPE510 v1.0 | ||
| N/A | | N/A | ||
− | | | + | | C0/M44 |
| Mesh-On-Lan/-Wan; PoE-Passthrough | | Mesh-On-Lan/-Wan; PoE-Passthrough | ||
|- | |- | ||
| 05. | | 05. | ||
+ | | Sim-Felsenschwalbe | ||
+ | | Dach - Haus D | ||
+ | | Haus E - links | ||
+ | | CPE510 v1.0 | ||
+ | | N/A | ||
+ | | C0/M44 | ||
+ | | Mesh-On-Lan/-Wan; PoE-Passthrough | ||
+ | |- | ||
+ | | 06. | ||
| Sim-Feldsperling | | Sim-Feldsperling | ||
| Dach - Haus E | | Dach - Haus E | ||
Zeile 216: | Zeile 422: | ||
| CPE510 v1.0 | | CPE510 v1.0 | ||
| N/A | | N/A | ||
− | | | + | | C0/M44 |
+ | | Mesh-On-Lan/-Wan; PoE-Passthrough | ||
+ | |- | ||
+ | | 07. | ||
+ | | Sim-Schieferdrossel | ||
+ | | Dach - Haus D | ||
+ | | Haus D - links | ||
+ | | CPE510 v1.0 | ||
+ | | N/A | ||
+ | | C0/M44 | ||
| Mesh-On-Lan/-Wan; PoE-Passthrough | | Mesh-On-Lan/-Wan; PoE-Passthrough | ||
|} | |} | ||
Zeile 222: | Zeile 437: | ||
===End-Geräte Knoten=== | ===End-Geräte Knoten=== | ||
5GHz Mesh-Only WDR3600, die Client-WLAN nur auf 2,4GHz machen. | 5GHz Mesh-Only WDR3600, die Client-WLAN nur auf 2,4GHz machen. | ||
+ | ( mit "*" gekennzeichnete Kanäle sind noch nicht eingestellt . ) | ||
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
Zeile 245: | Zeile 461: | ||
| Dach - Haus B/C | | Dach - Haus B/C | ||
| CPE210 v1.0 | | CPE210 v1.0 | ||
− | | | + | | C09/M00 |
| N/A | | N/A | ||
| Mesh-On-Lan/-Wan; PoE-Passthrough | | Mesh-On-Lan/-Wan; PoE-Passthrough | ||
|- | |- | ||
| 03. | | 03. | ||
+ | | Sim-Kleiber | ||
+ | | Dach - Haus B/C | ||
+ | | CPE210 v1.1 | ||
+ | | C13/M00 | ||
+ | | N/A | ||
+ | | Mesh-On-Lan/-Wan; PoE-Passthrough - im Chaos | ||
+ | |- | ||
+ | | 04. | ||
+ | | Sim-Kolkrabe | ||
+ | | Dach - Haus B/C | ||
+ | | CPE210 v1.1 | ||
+ | | C05/M00 | ||
+ | | N/A | ||
+ | | Mesh-On-Lan/-Wan; PoE-Passthrough - im Chaos | ||
+ | |- | ||
+ | | 05. | ||
| Sim-Blauelster | | Sim-Blauelster | ||
| C2.11 | | C2.11 | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | | + | | C09/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | vermisst |
|- | |- | ||
− | | | + | | 06. |
| Sim-Nebelkraehe | | Sim-Nebelkraehe | ||
| C2.03 | | C2.03 | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | | + | | C01/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | eingesammelt - Chaos |
|- | |- | ||
− | | | + | | 07. |
| Sim-Neuntoeter | | Sim-Neuntoeter | ||
| ? | | ? | ||
Zeile 271: | Zeile 503: | ||
| C06/M00 | | C06/M00 | ||
| C00/M44 | | C00/M44 | ||
− | | | + | | vermisst |
|- | |- | ||
− | | | + | | 08. |
| Sim-Schwanzmeise | | Sim-Schwanzmeise | ||
| ? | | ? | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | | + | | C13/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | eingesammelt - Chaos |
|- | |- | ||
− | | | + | | 09. |
| Sim-Singdrossel | | Sim-Singdrossel | ||
| C3.17 | | C3.17 | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | | + | | C13/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | eingesammelt - Chaos |
|- | |- | ||
− | | | + | | 10. |
| Sim-Spornammer | | Sim-Spornammer | ||
| B0.? | | B0.? | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | | + | | C01/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | vermisst |
|- | |- | ||
− | | | + | | 11. |
| Sim-Steinschmaetzer | | Sim-Steinschmaetzer | ||
| C2.15 | | C2.15 | ||
Zeile 303: | Zeile 535: | ||
| C01/M00 | | C01/M00 | ||
| C00/M44 | | C00/M44 | ||
− | | | + | | vermisst |
|- | |- | ||
− | | | + | | 12. |
| Sim-Tannenmeise | | Sim-Tannenmeise | ||
| C2.22 | | C2.22 | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | | + | | C05/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | eingesammelt - Chaos |
|- | |- | ||
− | | | + | | 13. |
| Sim-Uferschwalbe | | Sim-Uferschwalbe | ||
| C2.07 | | C2.07 | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | | + | | C13/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | eingesammelt - Chaos |
|- | |- | ||
− | | | + | | 14. |
| Sim-Weidensperling | | Sim-Weidensperling | ||
| C2.09 | | C2.09 | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | | + | | C05/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | eingesammelt - Chaos |
|- | |- | ||
− | | | + | | 15. |
| Sim-Zaunkoenig | | Sim-Zaunkoenig | ||
| C1.09 | | C1.09 | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | | + | | C13/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | eingesammelt - Chaos |
|- | |- | ||
− | | | + | | 16. |
| Sim-Beutelmeise | | Sim-Beutelmeise | ||
| C1.07 | | C1.07 | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | | + | | C05/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | eingesammellt - Chaos |
|- | |- | ||
− | | | + | | 17. |
| Sim-Bachstelze | | Sim-Bachstelze | ||
| C0.12 | | C0.12 | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | C01/ | + | | C01/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | vermisst |
|- | |- | ||
− | | | + | | 18. |
| Sim-Schwarzkehlchen | | Sim-Schwarzkehlchen | ||
| B1.01 | | B1.01 | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | | + | | C09/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | eingesammelt - Chaos |
|- | |- | ||
− | | | + | | 19. |
| Sim-Schafstelze | | Sim-Schafstelze | ||
| B1.03 | | B1.03 | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | | + | | C13/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | eingesammelt - Chaos |
|- | |- | ||
− | | | + | | 20. |
| Sim-Zippammer | | Sim-Zippammer | ||
| B1.09 | | B1.09 | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | | + | | C05/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | eingesammelt - Chaos |
|- | |- | ||
− | | | + | | 21. |
| Sim-Star | | Sim-Star | ||
| B1.06 | | B1.06 | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | C01/ | + | | C01/M00 |
| C00/M44 | | C00/M44 | ||
− | | | + | | eingesammelt - Chaos |
|- | |- | ||
− | | | + | | 22. |
| Sim-Wiesenpieper | | Sim-Wiesenpieper | ||
| B1.11 | | B1.11 | ||
| WDR3600 v1 | | WDR3600 v1 | ||
− | | C01/ | + | | C13*/M00 |
+ | | C00/M44 | ||
+ | | vermisst | ||
+ | |- | ||
+ | | 23. | ||
+ | | Sim-Elster | ||
+ | | C0.?? | ||
+ | | WDR3600 v1 | ||
+ | | C09/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
+ | |- | ||
+ | | 24. | ||
+ | | Sim-Eichelhaeher | ||
+ | | D1.01 | ||
+ | | WDR3600 v1 | ||
+ | | C05/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
+ | |- | ||
+ | | 25. | ||
+ | | Sim-Hausrotschwanz | ||
+ | | D1.09 | ||
+ | | WDR3600 v1 | ||
+ | | C06/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
+ | |- | ||
+ | | 26. | ||
+ | | Sim-Erlenzeisig | ||
+ | | D1.07 | ||
+ | | WDR3600 v1 | ||
+ | | C13/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
+ | |- | ||
+ | | 27. | ||
+ | | Sim-Buchfink | ||
+ | | D2.02 | ||
+ | | WDR3600 v1 | ||
+ | | C05/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
+ | |- | ||
+ | | 28. | ||
+ | | Sim-Grauammer | ||
+ | | D2.04 | ||
+ | | WDR3600 v1 | ||
+ | | C09/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
+ | |- | ||
+ | | 29. | ||
+ | | Sim-Blaumerle | ||
+ | | D0.09 | ||
+ | | WDR3600 v1 | ||
+ | | C09/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
+ | |- | ||
+ | | 30. | ||
+ | | Sim-Bluthaenfling | ||
+ | | D0.03 | ||
+ | | WDR3600 v1 | ||
+ | | C01/M00 | ||
+ | | C00/M44 | ||
+ | | vermisst | ||
+ | |- | ||
+ | | 31. | ||
+ | | Sim-Mehlschwalbe | ||
+ | | E1.13 | ||
+ | | WDR3600 v1 | ||
+ | | C13/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
+ | |- | ||
+ | | 32. | ||
+ | | Sim-Blaumeise | ||
+ | | E1.11 | ||
+ | | WDR3600 v1 | ||
+ | | C01/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
+ | |- | ||
+ | | 33. | ||
+ | | Sim-Misteldrossel | ||
+ | | D1.21 | ||
+ | | WDR3600 v1 | ||
+ | | C05/M00 | ||
+ | | C00/M44 | ||
+ | | vermisst | ||
+ | |- | ||
+ | | 34. | ||
+ | | Sim-Heckenbraunelle | ||
+ | | B1.19 | ||
+ | | WDR3600 v1 | ||
+ | | C00/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
+ | |- | ||
+ | | 35. | ||
+ | | Sim-Bachstelze | ||
+ | | B2.20 | ||
+ | | WDR3600 v1 | ||
+ | | C05/M00 | ||
+ | | C00/M44 | ||
+ | | vermisst | ||
+ | |- | ||
+ | | 36. | ||
+ | | Sim-Kohlmeise | ||
+ | | B1.15 | ||
+ | | WDR3600 v1 | ||
+ | | C00/M00 | ||
+ | | C00/M44 | ||
+ | | vermisst | ||
+ | |- | ||
+ | | 37. | ||
+ | | Sim-Rotkehlchen | ||
+ | | D1.19 | ||
+ | | WDR3600 v1 | ||
+ | | C09/M00 | ||
+ | | C00/M44 | ||
+ | | vermisst | ||
+ | |- | ||
+ | | 38. | ||
+ | | Sim-Stieglitz | ||
+ | | D2.21 | ||
+ | | WDR3600 v1 | ||
+ | | C13/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
+ | |- | ||
+ | | 39. | ||
+ | | Sim-Gimpel | ||
+ | | D1.04 | ||
+ | | WDR3600 v1 | ||
+ | | C05/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
+ | |- | ||
+ | | 40. | ||
+ | | Sim-Goldammer | ||
+ | | D1.15 | ||
+ | | WDR3600 v1 | ||
+ | | C01/M00 | ||
+ | | C00/M44 | ||
+ | | vermisst | ||
+ | |- | ||
+ | | 41. | ||
+ | | Sim-Rotdrossel | ||
+ | | D1.15 | ||
+ | | WDR3600 v1 | ||
+ | | C01/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
+ | |- | ||
+ | | 42. | ||
+ | | Sim-Saatkrähe | ||
+ | | D1.15 | ||
+ | | WDR3600 v1 | ||
+ | | C01/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
+ | |- | ||
+ | | 43. | ||
+ | | Sim-Rötelschwalbe | ||
+ | | D1.15 | ||
+ | | WDR3600 v1 | ||
+ | | C01/M00 | ||
| C00/M44 | | C00/M44 | ||
− | | | + | | eingesammelt - Chaos |
+ | |- | ||
+ | | 44. | ||
+ | | Sim-Rotkopfwürger | ||
+ | | D1.15 | ||
+ | | WDR3600 v1 | ||
+ | | C01/M00 | ||
+ | | C00/M44 | ||
+ | | eingesammelt - Chaos | ||
|} | |} | ||
+ | |||
[http://photos.wiesbaden.freifunk.net/picture.php?/277/category/21 Verteilung Knoten Haus B Etage 1] | [http://photos.wiesbaden.freifunk.net/picture.php?/277/category/21 Verteilung Knoten Haus B Etage 1] | ||
[http://photos.wiesbaden.freifunk.net/picture.php?/259/category/21 Verteilung Knoten Haus C Etage 2] | [http://photos.wiesbaden.freifunk.net/picture.php?/259/category/21 Verteilung Knoten Haus C Etage 2] | ||
+ | |||
+ | [http://photos.wiesbaden.freifunk.net/picture.php?/296/category/21 Verteilung Knoten Haus D Etage 0] | ||
+ | |||
+ | [http://photos.wiesbaden.freifunk.net/picture.php?/297/category/21 Verteilung Knoten Haus D Etage 1] | ||
+ | |||
+ | [http://photos.wiesbaden.freifunk.net/picture.php?/298/category/21 Verteilung Knoten Haus D Etage 2] | ||
+ | |||
+ | ==== WLAN-Kanäle bei IEEE 802.11g und 802.11n (2,4 GHz überlappungsfrei bei 20 MHz Kanalbreite) ==== | ||
+ | |||
+ | |||
+ | [[Datei:WLAN_2_4_20mhz.png]] | ||
+ | |||
+ | Quelle: [http://www.elektronik-kompendium.de/sites/net/1712061.htm www.elektronik-kompendium.de ] | ||
+ | |||
+ | ===Server=== | ||
+ | Modell: HP Proliant DL380 G5 | ||
+ | Betriebssystem: Ubuntu 14.04 LTS | ||
+ | Virtualisierung: KVM/QEMU | ||
+ | |||
+ | ====Netzwerk Config==== | ||
+ | Installation Open vSwitch | ||
+ | <source lang='text'> | ||
+ | apt-get install openvswitch-switch openvswitch-common | ||
+ | </source> | ||
+ | |||
+ | Anlegen der Open vSwitch Bridges | ||
+ | <source lang='text'> | ||
+ | ovs-vsctl add-br br-eth0 | ||
+ | ovs-vsctl add-port br-eth0 eth0 | ||
+ | |||
+ | ovs-vsctl add-br br-eth1 | ||
+ | ovs-vsctl add-port br-eth1 eth1 | ||
+ | |||
+ | ovs-vsctl add-br br-eth3 | ||
+ | ovs-vsctl add-port br-eth3 eth3 | ||
+ | |||
+ | ovs-vsctl add-br br-eth4 | ||
+ | ovs-vsctl add-port br-eth4 eth4 | ||
+ | </source> | ||
+ | |||
+ | /etc/network/interfaces | ||
+ | <source lang='text'> | ||
+ | auto lo | ||
+ | iface lo inet loopback | ||
+ | |||
+ | # Freifunk Client | ||
+ | auto br-ffwi | ||
+ | iface br-ffwi inet static | ||
+ | bridge_ports eth2 | ||
+ | bridge_stp no | ||
+ | bridge_fd 0 | ||
+ | address 10.56.2.80 | ||
+ | netmask 255.255.192.0 | ||
+ | gateway 10.56.0.29 | ||
+ | dns-nameservers 10.56.0.29 10.56.0.23 10.56.0.7 | ||
+ | |||
+ | iface br-ffwi inet6 auto | ||
+ | |||
+ | # Out-of-Band-Mgmt | ||
+ | auto eth5 | ||
+ | iface eth5 inet static | ||
+ | address 192.168.56.1 | ||
+ | netmask 255.255.255.0 | ||
+ | |||
+ | # Richtfunk Uplink VLAN 102 (tagged) | ||
+ | auto eth0 | ||
+ | iface eth0 inet manual | ||
+ | |||
+ | # Richtfunk zu Haus E VLAN 101 (tagged) | ||
+ | auto eth1 | ||
+ | iface eth1 inet manual | ||
+ | |||
+ | # Mesh VLANs auf PoE Switch VLANs 50-60 (tagged) | ||
+ | auto eth3 | ||
+ | iface eth3 inet manual | ||
+ | |||
+ | # Mesh VLANs auf PoE Switch VLANs 61-70 (tagged) | ||
+ | auto eth4 | ||
+ | iface eth4 inet manual | ||
+ | </source> | ||
+ | |||
+ | ====Libvirt Networks==== | ||
+ | Man legt z.B. nach /tmp/ die Netzwerk Definitionen ab. | ||
+ | |||
+ | Datei /tmp/ovs-eth0.xml | ||
+ | <source lang='xml'> | ||
+ | <network> | ||
+ | <name>ovs-eth0</name> | ||
+ | <forward mode='bridge'/> | ||
+ | <bridge name='br-eth0'/> | ||
+ | <virtualport type='openvswitch'/> | ||
+ | <portgroup name='vlan-all' default='yes'> | ||
+ | <vlan trunk='yes'> | ||
+ | <tag id='102'/> | ||
+ | </vlan> | ||
+ | </portgroup> | ||
+ | </network> | ||
+ | </source> | ||
+ | |||
+ | Datei /tmp/ovs-eth1.xml | ||
+ | <source lang='xml'> | ||
+ | <network> | ||
+ | <name>ovs-eth1</name> | ||
+ | <forward mode='bridge'/> | ||
+ | <bridge name='br-eth1'/> | ||
+ | <virtualport type='openvswitch'/> | ||
+ | <portgroup name='vlan-all' default='yes'> | ||
+ | <vlan trunk='yes'> | ||
+ | <tag id='101'/> | ||
+ | </vlan> | ||
+ | </portgroup> | ||
+ | </network> | ||
+ | </source> | ||
+ | |||
+ | Datei /tmp/ovs-eth3.xml | ||
+ | <source lang='xml'> | ||
+ | <network> | ||
+ | <name>ovs-eth3</name> | ||
+ | <forward mode='bridge'/> | ||
+ | <bridge name='br-eth3'/> | ||
+ | <virtualport type='openvswitch'/> | ||
+ | <portgroup name='vlan-all' default='yes'> | ||
+ | <vlan trunk='yes'> | ||
+ | <tag id='50'/> | ||
+ | <tag id='51'/> | ||
+ | <tag id='52'/> | ||
+ | <tag id='53'/> | ||
+ | <tag id='54'/> | ||
+ | <tag id='55'/> | ||
+ | <tag id='56'/> | ||
+ | <tag id='57'/> | ||
+ | <tag id='58'/> | ||
+ | <tag id='59'/> | ||
+ | <tag id='60'/> | ||
+ | </vlan> | ||
+ | </portgroup> | ||
+ | </network> | ||
+ | </source> | ||
+ | |||
+ | Datei /tmp/ovs-eth4.xml | ||
+ | <source lang='xml'> | ||
+ | <network> | ||
+ | <name>ovs-eth4</name> | ||
+ | <forward mode='bridge'/> | ||
+ | <bridge name='br-eth4'/> | ||
+ | <virtualport type='openvswitch'/> | ||
+ | <portgroup name='vlan-all' default='yes'> | ||
+ | <vlan trunk='yes'> | ||
+ | <tag id='60'/> | ||
+ | <tag id='61'/> | ||
+ | <tag id='62'/> | ||
+ | <tag id='63'/> | ||
+ | <tag id='64'/> | ||
+ | <tag id='65'/> | ||
+ | <tag id='66'/> | ||
+ | <tag id='67'/> | ||
+ | <tag id='68'/> | ||
+ | <tag id='69'/> | ||
+ | <tag id='70'/> | ||
+ | </vlan> | ||
+ | </portgroup> | ||
+ | </network> | ||
+ | </source> | ||
+ | |||
+ | Netzwerk-Definitionen einlesen, starten und für den Autostart markieren. | ||
+ | <source lang='text'> | ||
+ | virsh net-define /tmp/ovs-eth0.xml | ||
+ | virsh net-define /tmp/ovs-eth1.xml | ||
+ | virsh net-define /tmp/ovs-eth3.xml | ||
+ | virsh net-define /tmp/ovs-eth4.xml | ||
+ | |||
+ | virsh net-start ovs-eth0 | ||
+ | virsh net-start ovs-eth1 | ||
+ | virsh net-start ovs-eth3 | ||
+ | virsh net-start ovs-eth4 | ||
+ | |||
+ | virsh net-autostart ovs-eth0 | ||
+ | virsh net-autostart ovs-eth1 | ||
+ | virsh net-autostart ovs-eth3 | ||
+ | virsh net-autostart ovs-eth4 | ||
+ | </source> | ||
+ | |||
+ | ====Libvirt Domain Config==== | ||
+ | <source lang='xml'> | ||
+ | <domain type='kvm' id='5'> | ||
+ | <name>Sim-Papagei</name> | ||
+ | <uuid>3cc0a834-3d84-4974-891e-8483c09afa35</uuid> | ||
+ | <memory unit='KiB'>1048576</memory> | ||
+ | <currentMemory unit='KiB'>1048576</currentMemory> | ||
+ | <vcpu placement='static'>1</vcpu> | ||
+ | <resource> | ||
+ | <partition>/machine</partition> | ||
+ | </resource> | ||
+ | <os> | ||
+ | <type arch='x86_64' machine='pc-i440fx-trusty'>hvm</type> | ||
+ | <boot dev='hd'/> | ||
+ | </os> | ||
+ | <features> | ||
+ | <acpi/> | ||
+ | <apic/> | ||
+ | </features> | ||
+ | <cpu mode='host-model'> | ||
+ | <model fallback='allow'/> | ||
+ | </cpu> | ||
+ | <clock offset='utc'> | ||
+ | <timer name='rtc' tickpolicy='catchup'/> | ||
+ | <timer name='pit' tickpolicy='delay'/> | ||
+ | <timer name='hpet' present='no'/> | ||
+ | </clock> | ||
+ | <on_poweroff>destroy</on_poweroff> | ||
+ | <on_reboot>restart</on_reboot> | ||
+ | <on_crash>restart</on_crash> | ||
+ | <pm> | ||
+ | <suspend-to-mem enabled='no'/> | ||
+ | <suspend-to-disk enabled='no'/> | ||
+ | </pm> | ||
+ | <devices> | ||
+ | <emulator>/usr/bin/kvm-spice</emulator> | ||
+ | <disk type='file' device='disk'> | ||
+ | <driver name='qemu' type='raw'/> | ||
+ | <source file='/var/lib/libvirt/images/gluon-ffwi-0.3-beta-2016.02.08-x86-64.img'/> | ||
+ | <target dev='vdb' bus='virtio'/> | ||
+ | <alias name='virtio-disk1'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x0f' function='0x0'/> | ||
+ | </disk> | ||
+ | <controller type='usb' index='0' model='ich9-ehci1'> | ||
+ | <alias name='usb0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x7'/> | ||
+ | </controller> | ||
+ | <controller type='usb' index='0' model='ich9-uhci1'> | ||
+ | <alias name='usb0'/> | ||
+ | <master startport='0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0' multifunction='on'/> | ||
+ | </controller> | ||
+ | <controller type='usb' index='0' model='ich9-uhci2'> | ||
+ | <alias name='usb0'/> | ||
+ | <master startport='2'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x1'/> | ||
+ | </controller> | ||
+ | <controller type='usb' index='0' model='ich9-uhci3'> | ||
+ | <alias name='usb0'/> | ||
+ | <master startport='4'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x2'/> | ||
+ | </controller> | ||
+ | <controller type='pci' index='0' model='pci-root'> | ||
+ | <alias name='pci.0'/> | ||
+ | </controller> | ||
+ | <controller type='ide' index='0'> | ||
+ | <alias name='ide0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> | ||
+ | </controller> | ||
+ | <controller type='virtio-serial' index='0'> | ||
+ | <alias name='virtio-serial0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/> | ||
+ | </controller> | ||
+ | <controller type='sata' index='0'> | ||
+ | <alias name='sata0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x0c' function='0x0'/> | ||
+ | </controller> | ||
+ | <controller type='scsi' index='0'> | ||
+ | <alias name='scsi0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x0d' function='0x0'/> | ||
+ | </controller> | ||
+ | <interface type='bridge'> | ||
+ | <mac address='52:54:00:a6:96:9e'/> | ||
+ | <source bridge='br-eth0'/> | ||
+ | <vlan trunk='yes'> | ||
+ | <tag id='102'/> | ||
+ | </vlan> | ||
+ | <virtualport type='openvswitch'> | ||
+ | <parameters interfaceid='f7bb2560-9c5d-46b2-a747-be70c6cd51e8'/> | ||
+ | </virtualport> | ||
+ | <target dev='vnet0'/> | ||
+ | <model type='virtio'/> | ||
+ | <alias name='net0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> | ||
+ | </interface> | ||
+ | <interface type='bridge'> | ||
+ | <mac address='52:54:00:5d:1d:39'/> | ||
+ | <source bridge='br-eth1'/> | ||
+ | <vlan trunk='yes'> | ||
+ | <tag id='101'/> | ||
+ | </vlan> | ||
+ | <virtualport type='openvswitch'> | ||
+ | <parameters interfaceid='fbf6fb20-8ed5-4b53-8dc9-44c71de85cb1'/> | ||
+ | </virtualport> | ||
+ | <target dev='vnet1'/> | ||
+ | <model type='virtio'/> | ||
+ | <alias name='net1'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> | ||
+ | </interface> | ||
+ | <interface type='bridge'> | ||
+ | <mac address='52:54:00:c2:3d:41'/> | ||
+ | <source bridge='br-eth3'/> | ||
+ | <vlan trunk='yes'> | ||
+ | <tag id='50'/> | ||
+ | <tag id='51'/> | ||
+ | <tag id='52'/> | ||
+ | <tag id='53'/> | ||
+ | <tag id='54'/> | ||
+ | <tag id='55'/> | ||
+ | <tag id='56'/> | ||
+ | <tag id='57'/> | ||
+ | <tag id='58'/> | ||
+ | <tag id='59'/> | ||
+ | <tag id='60'/> | ||
+ | </vlan> | ||
+ | <virtualport type='openvswitch'> | ||
+ | <parameters interfaceid='75c18259-f444-42f6-9e50-fc190f8d0c31'/> | ||
+ | </virtualport> | ||
+ | <target dev='vnet2'/> | ||
+ | <model type='virtio'/> | ||
+ | <alias name='net2'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> | ||
+ | </interface> | ||
+ | <interface type='bridge'> | ||
+ | <mac address='52:54:00:f8:c8:64'/> | ||
+ | <source bridge='br-ffwi'/> | ||
+ | <target dev='vnet3'/> | ||
+ | <model type='virtio'/> | ||
+ | <alias name='net3'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> | ||
+ | </interface> | ||
+ | <interface type='bridge'> | ||
+ | <mac address='52:54:00:36:16:cc'/> | ||
+ | <source bridge='br-eth4'/> | ||
+ | <vlan trunk='yes'> | ||
+ | <tag id='61'/> | ||
+ | <tag id='62'/> | ||
+ | <tag id='63'/> | ||
+ | <tag id='64'/> | ||
+ | <tag id='65'/> | ||
+ | <tag id='66'/> | ||
+ | <tag id='67'/> | ||
+ | <tag id='68'/> | ||
+ | <tag id='69'/> | ||
+ | <tag id='70'/> | ||
+ | </vlan> | ||
+ | <virtualport type='openvswitch'> | ||
+ | <parameters interfaceid='f78d5cf4-a7da-4198-b590-19ab77c045b6'/> | ||
+ | </virtualport> | ||
+ | <target dev='vnet4'/> | ||
+ | <model type='virtio'/> | ||
+ | <alias name='net4'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> | ||
+ | </interface> | ||
+ | <serial type='pty'> | ||
+ | <source path='/dev/pts/1'/> | ||
+ | <target port='0'/> | ||
+ | <alias name='serial0'/> | ||
+ | </serial> | ||
+ | <console type='pty' tty='/dev/pts/1'> | ||
+ | <source path='/dev/pts/1'/> | ||
+ | <target type='serial' port='0'/> | ||
+ | <alias name='serial0'/> | ||
+ | </console> | ||
+ | <channel type='spicevmc'> | ||
+ | <target type='virtio' name='com.redhat.spice.0'/> | ||
+ | <alias name='channel0'/> | ||
+ | <address type='virtio-serial' controller='0' bus='0' port='1'/> | ||
+ | </channel> | ||
+ | <input type='mouse' bus='ps2'/> | ||
+ | <input type='keyboard' bus='ps2'/> | ||
+ | <graphics type='spice' port='5900' autoport='yes' listen='127.0.0.1'> | ||
+ | <listen type='address' address='127.0.0.1'/> | ||
+ | </graphics> | ||
+ | <sound model='ich6'> | ||
+ | <alias name='sound0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> | ||
+ | </sound> | ||
+ | <video> | ||
+ | <model type='qxl' ram='65536' vram='65536' heads='1'/> | ||
+ | <alias name='video0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> | ||
+ | </video> | ||
+ | <redirdev bus='usb' type='spicevmc'> | ||
+ | <alias name='redir0'/> | ||
+ | </redirdev> | ||
+ | <redirdev bus='usb' type='spicevmc'> | ||
+ | <alias name='redir1'/> | ||
+ | </redirdev> | ||
+ | <memballoon model='virtio'> | ||
+ | <alias name='balloon0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/> | ||
+ | </memballoon> | ||
+ | </devices> | ||
+ | <seclabel type='dynamic' model='apparmor' relabel='yes'> | ||
+ | <label>libvirt-3cc0a834-3d84-4974-891e-8483c09afa35</label> | ||
+ | <imagelabel>libvirt-3cc0a834-3d84-4974-891e-8483c09afa35</imagelabel> | ||
+ | </seclabel> | ||
+ | </domain> | ||
+ | </source> | ||
+ | |||
+ | ====VM-Watchdog-Script==== | ||
+ | Wenn die VM unerwartet crasht, kann diese per Remote nicht resettet werden. | ||
+ | Dies machen wir automatisiert mit diesem Script, das in /usr/local/bin liegt. | ||
+ | <source lang='bash'> | ||
+ | #!/bin/bash | ||
+ | |||
+ | count=$( ping6 -c 5 fd56:b4dc:4b1e:0:5054:ff:fea6:969e | grep "bytes from" | wc -l ) | ||
+ | if [ $count -eq 0 ] | ||
+ | then | ||
+ | logger "Sim-Papagei: Not available -> Reset VM" | ||
+ | virsh reset Sim-Papagei || virsh start Sim-Papagei | ||
+ | exit 0 | ||
+ | else | ||
+ | logger "Sim-Papagei: Up and running -> nothing to do" | ||
+ | exit 0 | ||
+ | fi | ||
+ | </source> | ||
+ | |||
+ | Per cronjob wird es alle 20 Minuten ausgeführt | ||
+ | <source lang='text'> | ||
+ | # m h dom mon dow command | ||
+ | */20 * * * * /usr/local/bin/vm-watchdog.sh | ||
+ | </source> | ||
==Gebäudeplan== | ==Gebäudeplan== | ||
Zeile 486: | Zeile 1.311: | ||
! Kommentar | ! Kommentar | ||
|- | |- | ||
− | | WDR3600 | + | | WDR4300 |
− | | | + | | 13 |
− | | | + | | 47,99€ |
− | | | + | | 623,87€ |
+ | | Client-Geräte/ Mesh über 5 GHz | ||
+ | |- | ||
+ | | WDR3600 | ||
+ | | 15 | ||
+ | | 39,99€ | ||
+ | | 599,85€ | ||
| Client-Geräte/ Mesh über 5 GHz | | Client-Geräte/ Mesh über 5 GHz | ||
|- | |- | ||
Zeile 521: | Zeile 1.352: | ||
| 455,89€ | | 455,89€ | ||
| PoE-Switch | | PoE-Switch | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
| TOUGHCable LEVEL 2 CARRIER 305m | | TOUGHCable LEVEL 2 CARRIER 305m | ||
Zeile 564: | Zeile 1.389: | ||
| | | | ||
|- | |- | ||
− | | | + | | [https://www.servershop24.de/hp-proliant-dl380-g5-2x-xeon-e5450-qc-3-0-ghz-8-gb-ram-2x-146-gb-sas-10k/a-106729/ HP ProLiant DL380 G5 2x Xeon E5450] |
| 1 | | 1 | ||
− | | | + | | 249,99€ (Preis servershop24) |
− | | | + | | 249,99€ |
− | | | + | | Server |
|- | |- | ||
− | | | + | | [https://www.servershop24.de/komponenten/netzwerkkarten/10-100-1000-rj45/hp-nc364t-pci-e-quad-port-gigabit-netzwerkkarte-436431-001/a-103696/ HP NC364T Quad Port Gigabit Server Adapter] |
| 1 | | 1 | ||
− | | | + | | 49,99€ (Preis servershop24) |
− | | | + | | 49,99€ |
− | | | + | | 4x Port RJ45 Netzwerkkarte |
|- | |- | ||
− | | | + | | [http://www.voelkner.de/products/72937/APC-by-Schneider-Electric-19-USV-750-VA-Smart-UPS-SUA750RMI1U.html 750 VA Smart-UPS SUA750RMI1U] |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
| 1 | | 1 | ||
− | | | + | | 537,53€ (Preis Völkner) |
− | | | + | | 537,53€ |
− | + | | USV | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | | | ||
|- | |- | ||
| Summe | | Summe | ||
| | | | ||
| | | | ||
− | | | + | | 4588,98€ |
| | | | ||
|} | |} | ||
Zeile 827: | Zeile 1.628: | ||
[[Medium:Simeonhaus_entwurf.odt]] | [[Medium:Simeonhaus_entwurf.odt]] | ||
[[Medium:sim_plan.pdf]] | [[Medium:sim_plan.pdf]] | ||
+ | |||
+ | |||
+ | {{Category Add|Wiesbaden}} |
Aktuelle Version vom 7. Februar 2019, 19:43 Uhr
Allgemeines
Name | Simeonhaus |
Thema | Versorgung des ehemaligen Seniorenheimes mit Freifunk |
Verantwortlicher | Axel |
Mitglieder | Axel, Daniel, Günni, Markus, Peter, Sander, Tobias |
Berichtsturnus | auf ML |
Beginn | 2015-10-01 |
Ende | ? |
Ergebnisse = |
aktueller Stand
- 2017-0x-0x | 01 Pers. X xx h > Abbau
- 2016-06-12 | 01 Pers. X 01 h > Vorbereitung Anschluss Hausmeister / Aufräumarbeiten
- 2016-05-30 | 01 Pers. X 01 h > Router eingesammelt von Hilforganisationen
- 2016-05-18 | 02 Pers. X 03 h > Router eingesammelt
- 2016-05-11 | 02 Pers. X 01 h > Richtfunkknoten neugestartet
- 2016-05-08 | 03 Pers. X 06 h > Richtfunk zwischen Haus C und Haus D installiert, Router verteilt
- 2016-05-06 | 01 Pers. X 03 h > Richtfunk zwischen Haus C und Haus D vorbereitet
- 2016-04-17 | 04 Pers. X 05 h > Router geflasht, Router verteilt
- 2016-04-10 | 01 Pers. X 01 h > Server + VM umkonfiguriert (Open vSwitch)
- 2016-03-15 | 02 Pers. X 02 h > Richtfunkantenne Haus E neugestartet (Umzug war abgesagt)
- 2016-03-01 | 02 Pers. X 03 h > Knoten im rechten Flügel Haus D aufgestellt
- 2016-02-20 > Server installiert
- 2016-02-18 > Router geflasht
- 2016-02-14 > Server aufgebaut
- 2016-02-13 > Server aufgebaut
- 2016-01-09 > Haus C nach WLAN-Löcher durchsucht und behoben, Haus B z.T. mit Knoten versorgt
- 2015-12-19 > Richtfunk zwischen Haus B und Haus E installiert
- 2015-12-12 > Knoten im 2. Stock Haus C aufgestellt
- 2015-12-06 > Standort Opelbad funkt
- 2015-12-02 > Richtfunk steht wieder
- 2015-11-30 > Richtfunk ist unterbrochen
- 2015-11-22 > Richtfunk steht zur HSK
- 2015-11-20 > Richtfunk steht zwischen Philippsberg und HSK
- 2015-11-14 > Richtfunk aufgebaut, Verbindung zu Voldemort ist stark schwankend
- 2015-10-25 > Suche nach Standorten für die Richtfunkstrecke
Technik
Folgende Richtlinien sollen gelten:
- VLAN 5 = Freifunk Client Netz
- VLANs 50-70 = Untagged VLANs für Mesh-On-Lan/-Wan
- VLANs 100-110 = Tagged VLANs für Richtfunk
- CPE210/CPE510 = Mesh-On-LAN/-WAN + PoE Passthrough aktiviert
Port-Legende: "X YZ YZ .. "
X: Port-Bezeichnung (Gerät, nicht Software intern)
Y: VLAN-ID
Z: U = Untagged, T = Tagged
WLAN-Legende: "CX/MX"
C: Client-WLAN
M: Mesh-WLAN
X: 0 = deaktiviert; >0 = WLAN-Kanal (+ aktiviert)
Standorts-Spinnen
Geräte, die an zentralen Sternpunkten Batman Mesh per LAN-Kabel i.d.R. via VLANs verteilen.
Lfd. Nr. | Knotenname | Standort | Routertyp | WLAN (2,4 - 5) | Port | Gerät | Port | Gerät | Port | Gerät | Port | Gerät | Port | Gerät | Port | Gerät | Kommentar |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
01. | Sim-Papagei | Aufzugsraum - Haus B/C | HP ProLiant DL380 G5 | - | 1 (eth2) | Switch Port 1 | 2 (eth5) | Out of Band Management | 3 (eth4) | Switch Port 5 | 4 (eth3) | Switch Port 4 | 5 (eth1) | Switch Port 3 | 6 (eth0) | Switch Port 2 | Batman Spider Haus B/C |
02. | Sim-Schneeammer | Dach - Haus E | WDR3600 v1 | C06/M00 - C00/M00 | WAN 2U | frei | 1 5T 101T | NSM5->HausB/C | 2 102U | Feldsperling | 3 103U | Felsenschwalbe | 4 104U | Mehlschwalbe | - | - | Batman Spider Haus E |
03. | Sim-Gruenfink | Dach - Haus D | WDR3600 v1.1 | C06/M00 - C00/M00 | WAN 2u | frei | 1 5T 103T | NSM5>HausB/C | 2 10U | Schieferdrossel | 3 11U | frei | 4 5U | frei | - | - | Batman Spider Haus D |
Switch
Portbelegung des Ubiquiti EdgeSwitch ES-24-250W, dass im Rack verbaut ist.
Port | VLANs | Tag-Modi | Gerät | PoE-Status |
---|---|---|---|---|
1 | 5 | untagged | Server Port 1 eth2 | disabled |
2 | 102 | tagged | Server Port 6 eth0 | disabled |
3 | 101,103 | tagged | Server Port 5 eth1 | disabled |
4 | 50-60 | tagged | Server Port 4 eth3 | disabled |
5 | 61-70 | tagged | Server Port 3 eth4 | disabled |
6 | 5, 101 | tagged | NanoStation M5 -> Haus E | 24V passive |
7 | 5, 102 | tagged | PowerBeam 5AC 500 -> HSK | 24V passive |
8 | 50 | untagged | Sim-Nachtigall | 24V passive |
9 | 51 | untagged | Sim-Feldlerche | 24V passive |
10 | 52 | untagged | Sim-Amsel | 24V passive |
11 | 53 | untagged | Sim-Spatz | 24V passive |
12 | 54 | untagged | Sim-Spornammer | 24V passive |
13 | 55 | untagged | Sim-Fink | 24V passive |
14 | 56 | untagged | Sim-Kleiber | 24V passive |
15 | 57 | untagged | Sim-Katzendrossel | 24V passive |
16 | 58 | untagged | Meshing available | 24V passive |
17 | 59 | untagged | Meshing available | 24V passive |
18 | 60 | untagged | Meshing available | 24V passive |
19 | 5,103 | tagged | NanoStation M5 -> Haus D | 24V passive |
20 | 62 | untagged | Sim-Elster | disabled |
21 | 63 | untagged | Sim-Saatkraehe | disabled |
22 | 5 | untagged | Out of Band Management | disabled |
23 | 5 | untagged | integrated Lights-Out (iLO) | disabled |
24 | 5 | untagged | Out of Band Management | disabled |
Richtfunk
Lfd. Nr. | Knotenname | Standort | Routertyp | nach | Kommentar |
---|---|---|---|---|---|
01. | sim-sueden | Dach - Haus B/C | PowerBeam 5AC 500 | HSK | Freifunk Uplink #1 |
02. | ffmwu-sim-haus-b | Dach - Haus B | NSM5 | Haus E | |
03. | ffmwu-sim-haus-e | Dach - Haus E | NSM5 | Haus B | |
04. | ffmwu-sim-haus-c | Dach - Haus C | NSM5 | Haus D | |
05. | ffmwu-sim-haus-d | Dach - Haus D | NSM5 | Haus C |
Mesh-Fänger
CPE510 Geräte, die auf die Gebäudefassaden Batman-Mesh "strahlen", um die Mesh-Only-Knoten (WDR3600er) "einzufangen".
Lfd. Nr. | Knotenname | Standort | Richtung | Routertyp | 2GHz | 5GHz | Kommentar |
---|---|---|---|---|---|---|---|
01. | Sim-Feldlerche | Dach - Haus B/C | Haus C - rechts | CPE510 v1.0 | N/A | C0/M44 | Mesh-On-Lan/-Wan; PoE-Passthrough |
02. | Sim-Nachtigall | Dach - Haus B/C | Haus B - rechts | CPE510 v1.0 | N/A | C0/M44 | Mesh-On-Lan/-Wan; PoE-Passthrough |
03. | Sim-Spatz | Dach - Haus B/C | Haus C - links | CPE510 v1.0 | N/A | C0/M44 | Mesh-On-Lan/-Wan; PoE-Passthrough |
04. | Sim-Katzendrossel | Dach - Haus B/C | Haus B - links | CPE510 v1.0 | N/A | C0/M44 | Mesh-On-Lan/-Wan; PoE-Passthrough |
05. | Sim-Felsenschwalbe | Dach - Haus D | Haus E - links | CPE510 v1.0 | N/A | C0/M44 | Mesh-On-Lan/-Wan; PoE-Passthrough |
06. | Sim-Feldsperling | Dach - Haus E | Haus D - rechts | CPE510 v1.0 | N/A | C0/M44 | Mesh-On-Lan/-Wan; PoE-Passthrough |
07. | Sim-Schieferdrossel | Dach - Haus D | Haus D - links | CPE510 v1.0 | N/A | C0/M44 | Mesh-On-Lan/-Wan; PoE-Passthrough |
End-Geräte Knoten
5GHz Mesh-Only WDR3600, die Client-WLAN nur auf 2,4GHz machen. ( mit "*" gekennzeichnete Kanäle sind noch nicht eingestellt . )
Lfd. Nr. | Knotenname | Standort | Routertyp | 2GHz | 5GHz | Kommentar |
---|---|---|---|---|---|---|
01. | Sim-Amsel | Dach - Haus B/C | CPE210 v1.0 | C01/M00 | N/A | Mesh-On-Lan/-Wan; PoE-Passthrough |
02. | Sim-Fink | Dach - Haus B/C | CPE210 v1.0 | C09/M00 | N/A | Mesh-On-Lan/-Wan; PoE-Passthrough |
03. | Sim-Kleiber | Dach - Haus B/C | CPE210 v1.1 | C13/M00 | N/A | Mesh-On-Lan/-Wan; PoE-Passthrough - im Chaos |
04. | Sim-Kolkrabe | Dach - Haus B/C | CPE210 v1.1 | C05/M00 | N/A | Mesh-On-Lan/-Wan; PoE-Passthrough - im Chaos |
05. | Sim-Blauelster | C2.11 | WDR3600 v1 | C09/M00 | C00/M44 | vermisst |
06. | Sim-Nebelkraehe | C2.03 | WDR3600 v1 | C01/M00 | C00/M44 | eingesammelt - Chaos |
07. | Sim-Neuntoeter | ? | WDR3600 v1 | C06/M00 | C00/M44 | vermisst |
08. | Sim-Schwanzmeise | ? | WDR3600 v1 | C13/M00 | C00/M44 | eingesammelt - Chaos |
09. | Sim-Singdrossel | C3.17 | WDR3600 v1 | C13/M00 | C00/M44 | eingesammelt - Chaos |
10. | Sim-Spornammer | B0.? | WDR3600 v1 | C01/M00 | C00/M44 | vermisst |
11. | Sim-Steinschmaetzer | C2.15 | WDR3600 v1 | C01/M00 | C00/M44 | vermisst |
12. | Sim-Tannenmeise | C2.22 | WDR3600 v1 | C05/M00 | C00/M44 | eingesammelt - Chaos |
13. | Sim-Uferschwalbe | C2.07 | WDR3600 v1 | C13/M00 | C00/M44 | eingesammelt - Chaos |
14. | Sim-Weidensperling | C2.09 | WDR3600 v1 | C05/M00 | C00/M44 | eingesammelt - Chaos |
15. | Sim-Zaunkoenig | C1.09 | WDR3600 v1 | C13/M00 | C00/M44 | eingesammelt - Chaos |
16. | Sim-Beutelmeise | C1.07 | WDR3600 v1 | C05/M00 | C00/M44 | eingesammellt - Chaos |
17. | Sim-Bachstelze | C0.12 | WDR3600 v1 | C01/M00 | C00/M44 | vermisst |
18. | Sim-Schwarzkehlchen | B1.01 | WDR3600 v1 | C09/M00 | C00/M44 | eingesammelt - Chaos |
19. | Sim-Schafstelze | B1.03 | WDR3600 v1 | C13/M00 | C00/M44 | eingesammelt - Chaos |
20. | Sim-Zippammer | B1.09 | WDR3600 v1 | C05/M00 | C00/M44 | eingesammelt - Chaos |
21. | Sim-Star | B1.06 | WDR3600 v1 | C01/M00 | C00/M44 | eingesammelt - Chaos |
22. | Sim-Wiesenpieper | B1.11 | WDR3600 v1 | C13*/M00 | C00/M44 | vermisst |
23. | Sim-Elster | C0.?? | WDR3600 v1 | C09/M00 | C00/M44 | eingesammelt - Chaos |
24. | Sim-Eichelhaeher | D1.01 | WDR3600 v1 | C05/M00 | C00/M44 | eingesammelt - Chaos |
25. | Sim-Hausrotschwanz | D1.09 | WDR3600 v1 | C06/M00 | C00/M44 | eingesammelt - Chaos |
26. | Sim-Erlenzeisig | D1.07 | WDR3600 v1 | C13/M00 | C00/M44 | eingesammelt - Chaos |
27. | Sim-Buchfink | D2.02 | WDR3600 v1 | C05/M00 | C00/M44 | eingesammelt - Chaos |
28. | Sim-Grauammer | D2.04 | WDR3600 v1 | C09/M00 | C00/M44 | eingesammelt - Chaos |
29. | Sim-Blaumerle | D0.09 | WDR3600 v1 | C09/M00 | C00/M44 | eingesammelt - Chaos |
30. | Sim-Bluthaenfling | D0.03 | WDR3600 v1 | C01/M00 | C00/M44 | vermisst |
31. | Sim-Mehlschwalbe | E1.13 | WDR3600 v1 | C13/M00 | C00/M44 | eingesammelt - Chaos |
32. | Sim-Blaumeise | E1.11 | WDR3600 v1 | C01/M00 | C00/M44 | eingesammelt - Chaos |
33. | Sim-Misteldrossel | D1.21 | WDR3600 v1 | C05/M00 | C00/M44 | vermisst |
34. | Sim-Heckenbraunelle | B1.19 | WDR3600 v1 | C00/M00 | C00/M44 | eingesammelt - Chaos |
35. | Sim-Bachstelze | B2.20 | WDR3600 v1 | C05/M00 | C00/M44 | vermisst |
36. | Sim-Kohlmeise | B1.15 | WDR3600 v1 | C00/M00 | C00/M44 | vermisst |
37. | Sim-Rotkehlchen | D1.19 | WDR3600 v1 | C09/M00 | C00/M44 | vermisst |
38. | Sim-Stieglitz | D2.21 | WDR3600 v1 | C13/M00 | C00/M44 | eingesammelt - Chaos |
39. | Sim-Gimpel | D1.04 | WDR3600 v1 | C05/M00 | C00/M44 | eingesammelt - Chaos |
40. | Sim-Goldammer | D1.15 | WDR3600 v1 | C01/M00 | C00/M44 | vermisst |
41. | Sim-Rotdrossel | D1.15 | WDR3600 v1 | C01/M00 | C00/M44 | eingesammelt - Chaos |
42. | Sim-Saatkrähe | D1.15 | WDR3600 v1 | C01/M00 | C00/M44 | eingesammelt - Chaos |
43. | Sim-Rötelschwalbe | D1.15 | WDR3600 v1 | C01/M00 | C00/M44 | eingesammelt - Chaos |
44. | Sim-Rotkopfwürger | D1.15 | WDR3600 v1 | C01/M00 | C00/M44 | eingesammelt - Chaos |
Verteilung Knoten Haus B Etage 1
Verteilung Knoten Haus C Etage 2
Verteilung Knoten Haus D Etage 0
Verteilung Knoten Haus D Etage 1
Verteilung Knoten Haus D Etage 2
WLAN-Kanäle bei IEEE 802.11g und 802.11n (2,4 GHz überlappungsfrei bei 20 MHz Kanalbreite)
Quelle: www.elektronik-kompendium.de
Server
Modell: HP Proliant DL380 G5 Betriebssystem: Ubuntu 14.04 LTS Virtualisierung: KVM/QEMU
Netzwerk Config
Installation Open vSwitch
apt-get install openvswitch-switch openvswitch-common
Anlegen der Open vSwitch Bridges
ovs-vsctl add-br br-eth0
ovs-vsctl add-port br-eth0 eth0
ovs-vsctl add-br br-eth1
ovs-vsctl add-port br-eth1 eth1
ovs-vsctl add-br br-eth3
ovs-vsctl add-port br-eth3 eth3
ovs-vsctl add-br br-eth4
ovs-vsctl add-port br-eth4 eth4
/etc/network/interfaces
auto lo
iface lo inet loopback
# Freifunk Client
auto br-ffwi
iface br-ffwi inet static
bridge_ports eth2
bridge_stp no
bridge_fd 0
address 10.56.2.80
netmask 255.255.192.0
gateway 10.56.0.29
dns-nameservers 10.56.0.29 10.56.0.23 10.56.0.7
iface br-ffwi inet6 auto
# Out-of-Band-Mgmt
auto eth5
iface eth5 inet static
address 192.168.56.1
netmask 255.255.255.0
# Richtfunk Uplink VLAN 102 (tagged)
auto eth0
iface eth0 inet manual
# Richtfunk zu Haus E VLAN 101 (tagged)
auto eth1
iface eth1 inet manual
# Mesh VLANs auf PoE Switch VLANs 50-60 (tagged)
auto eth3
iface eth3 inet manual
# Mesh VLANs auf PoE Switch VLANs 61-70 (tagged)
auto eth4
iface eth4 inet manual
Libvirt Networks
Man legt z.B. nach /tmp/ die Netzwerk Definitionen ab.
Datei /tmp/ovs-eth0.xml
<network>
<name>ovs-eth0</name>
<forward mode='bridge'/>
<bridge name='br-eth0'/>
<virtualport type='openvswitch'/>
<portgroup name='vlan-all' default='yes'>
<vlan trunk='yes'>
<tag id='102'/>
</vlan>
</portgroup>
</network>
Datei /tmp/ovs-eth1.xml
<network>
<name>ovs-eth1</name>
<forward mode='bridge'/>
<bridge name='br-eth1'/>
<virtualport type='openvswitch'/>
<portgroup name='vlan-all' default='yes'>
<vlan trunk='yes'>
<tag id='101'/>
</vlan>
</portgroup>
</network>
Datei /tmp/ovs-eth3.xml
<network>
<name>ovs-eth3</name>
<forward mode='bridge'/>
<bridge name='br-eth3'/>
<virtualport type='openvswitch'/>
<portgroup name='vlan-all' default='yes'>
<vlan trunk='yes'>
<tag id='50'/>
<tag id='51'/>
<tag id='52'/>
<tag id='53'/>
<tag id='54'/>
<tag id='55'/>
<tag id='56'/>
<tag id='57'/>
<tag id='58'/>
<tag id='59'/>
<tag id='60'/>
</vlan>
</portgroup>
</network>
Datei /tmp/ovs-eth4.xml
<network>
<name>ovs-eth4</name>
<forward mode='bridge'/>
<bridge name='br-eth4'/>
<virtualport type='openvswitch'/>
<portgroup name='vlan-all' default='yes'>
<vlan trunk='yes'>
<tag id='60'/>
<tag id='61'/>
<tag id='62'/>
<tag id='63'/>
<tag id='64'/>
<tag id='65'/>
<tag id='66'/>
<tag id='67'/>
<tag id='68'/>
<tag id='69'/>
<tag id='70'/>
</vlan>
</portgroup>
</network>
Netzwerk-Definitionen einlesen, starten und für den Autostart markieren.
virsh net-define /tmp/ovs-eth0.xml
virsh net-define /tmp/ovs-eth1.xml
virsh net-define /tmp/ovs-eth3.xml
virsh net-define /tmp/ovs-eth4.xml
virsh net-start ovs-eth0
virsh net-start ovs-eth1
virsh net-start ovs-eth3
virsh net-start ovs-eth4
virsh net-autostart ovs-eth0
virsh net-autostart ovs-eth1
virsh net-autostart ovs-eth3
virsh net-autostart ovs-eth4
Libvirt Domain Config
<domain type='kvm' id='5'>
<name>Sim-Papagei</name>
<uuid>3cc0a834-3d84-4974-891e-8483c09afa35</uuid>
<memory unit='KiB'>1048576</memory>
<currentMemory unit='KiB'>1048576</currentMemory>
<vcpu placement='static'>1</vcpu>
<resource>
<partition>/machine</partition>
</resource>
<os>
<type arch='x86_64' machine='pc-i440fx-trusty'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
<apic/>
</features>
<cpu mode='host-model'>
<model fallback='allow'/>
</cpu>
<clock offset='utc'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<pm>
<suspend-to-mem enabled='no'/>
<suspend-to-disk enabled='no'/>
</pm>
<devices>
<emulator>/usr/bin/kvm-spice</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/gluon-ffwi-0.3-beta-2016.02.08-x86-64.img'/>
<target dev='vdb' bus='virtio'/>
<alias name='virtio-disk1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0f' function='0x0'/>
</disk>
<controller type='usb' index='0' model='ich9-ehci1'>
<alias name='usb0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x7'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<alias name='usb0'/>
<master startport='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0' multifunction='on'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<alias name='usb0'/>
<master startport='2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x1'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci3'>
<alias name='usb0'/>
<master startport='4'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x2'/>
</controller>
<controller type='pci' index='0' model='pci-root'>
<alias name='pci.0'/>
</controller>
<controller type='ide' index='0'>
<alias name='ide0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
<controller type='virtio-serial' index='0'>
<alias name='virtio-serial0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</controller>
<controller type='sata' index='0'>
<alias name='sata0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0c' function='0x0'/>
</controller>
<controller type='scsi' index='0'>
<alias name='scsi0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0d' function='0x0'/>
</controller>
<interface type='bridge'>
<mac address='52:54:00:a6:96:9e'/>
<source bridge='br-eth0'/>
<vlan trunk='yes'>
<tag id='102'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='f7bb2560-9c5d-46b2-a747-be70c6cd51e8'/>
</virtualport>
<target dev='vnet0'/>
<model type='virtio'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:5d:1d:39'/>
<source bridge='br-eth1'/>
<vlan trunk='yes'>
<tag id='101'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='fbf6fb20-8ed5-4b53-8dc9-44c71de85cb1'/>
</virtualport>
<target dev='vnet1'/>
<model type='virtio'/>
<alias name='net1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:c2:3d:41'/>
<source bridge='br-eth3'/>
<vlan trunk='yes'>
<tag id='50'/>
<tag id='51'/>
<tag id='52'/>
<tag id='53'/>
<tag id='54'/>
<tag id='55'/>
<tag id='56'/>
<tag id='57'/>
<tag id='58'/>
<tag id='59'/>
<tag id='60'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='75c18259-f444-42f6-9e50-fc190f8d0c31'/>
</virtualport>
<target dev='vnet2'/>
<model type='virtio'/>
<alias name='net2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:f8:c8:64'/>
<source bridge='br-ffwi'/>
<target dev='vnet3'/>
<model type='virtio'/>
<alias name='net3'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:36:16:cc'/>
<source bridge='br-eth4'/>
<vlan trunk='yes'>
<tag id='61'/>
<tag id='62'/>
<tag id='63'/>
<tag id='64'/>
<tag id='65'/>
<tag id='66'/>
<tag id='67'/>
<tag id='68'/>
<tag id='69'/>
<tag id='70'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='f78d5cf4-a7da-4198-b590-19ab77c045b6'/>
</virtualport>
<target dev='vnet4'/>
<model type='virtio'/>
<alias name='net4'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>
<serial type='pty'>
<source path='/dev/pts/1'/>
<target port='0'/>
<alias name='serial0'/>
</serial>
<console type='pty' tty='/dev/pts/1'>
<source path='/dev/pts/1'/>
<target type='serial' port='0'/>
<alias name='serial0'/>
</console>
<channel type='spicevmc'>
<target type='virtio' name='com.redhat.spice.0'/>
<alias name='channel0'/>
<address type='virtio-serial' controller='0' bus='0' port='1'/>
</channel>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
<graphics type='spice' port='5900' autoport='yes' listen='127.0.0.1'>
<listen type='address' address='127.0.0.1'/>
</graphics>
<sound model='ich6'>
<alias name='sound0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
</sound>
<video>
<model type='qxl' ram='65536' vram='65536' heads='1'/>
<alias name='video0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<redirdev bus='usb' type='spicevmc'>
<alias name='redir0'/>
</redirdev>
<redirdev bus='usb' type='spicevmc'>
<alias name='redir1'/>
</redirdev>
<memballoon model='virtio'>
<alias name='balloon0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</memballoon>
</devices>
<seclabel type='dynamic' model='apparmor' relabel='yes'>
<label>libvirt-3cc0a834-3d84-4974-891e-8483c09afa35</label>
<imagelabel>libvirt-3cc0a834-3d84-4974-891e-8483c09afa35</imagelabel>
</seclabel>
</domain>
VM-Watchdog-Script
Wenn die VM unerwartet crasht, kann diese per Remote nicht resettet werden. Dies machen wir automatisiert mit diesem Script, das in /usr/local/bin liegt.
#!/bin/bash
count=$( ping6 -c 5 fd56:b4dc:4b1e:0:5054:ff:fea6:969e | grep "bytes from" | wc -l )
if [ $count -eq 0 ]
then
logger "Sim-Papagei: Not available -> Reset VM"
virsh reset Sim-Papagei || virsh start Sim-Papagei
exit 0
else
logger "Sim-Papagei: Up and running -> nothing to do"
exit 0
fi
Per cronjob wird es alle 20 Minuten ausgeführt
# m h dom mon dow command
*/20 * * * * /usr/local/bin/vm-watchdog.sh
Gebäudeplan
- Notfallpläne der Gebäude
- Belegung der Gebäude
links = Sichtweise, wenn man ins Gebäude herein geht
Lfd. Nr. | Gebäudename | Ergeschoss | 01. Stock | 02. Stock | 03. Stock |
---|---|---|---|---|---|
01. | Haus B links | nein | ja | ja | nein |
02. | Haus B rechts | ja | ja | ja | nein |
03. | Haus C links | nein | ja | ja | ja |
04. | Haus C rechts | ja | ja | ja | ja |
05. | Haus D links | nein | ja | ja | nein |
06. | Haus D rechts | ja | ja | ja | nein |
07. | Haus E | nein | ja | ja | nein |
- Vogelperspektive Stand: 2015-12-20
Planung
- Hardwarebestellung für das Projekt vom 14.01.2016
Produkt | Anzahl | Einzelpreis | Gesamt | Kommentar |
---|---|---|---|---|
WDR4300 | 13 | 47,99€ | 623,87€ | Client-Geräte/ Mesh über 5 GHz |
WDR3600 | 15 | 39,99€ | 599,85€ | Client-Geräte/ Mesh über 5 GHz |
Ubiquiti Nanostation M5 | 10 | 91,95€ (Preis varia-store) | 919,50€ | Mesh-Fänger/Richtfunk |
Ubiquiti PBE-5AC-400 | 4 | 115,19€ (Preis varia-store) | 460,76€ | Richtfunk |
Ubiquiti PBE-RAD-400 | 4 | 13,95€ (Preis varia-store) | 55,80€ | Schutz für PBE-5AC-400 |
TP-Link CPE210 | 4 | 45,80€ (Preis Völkner) | 183,20€ | Outdoor Client AP |
Ubiquiti EdgeSwitch ES-24-250W | 1 | 455,89€ (Preis varia-store) | 455,89€ | PoE-Switch |
TOUGHCable LEVEL 2 CARRIER 305m | 1 | 211,28€ (Preis varia-store) | 211,28€ | Outdoor Kabel wetterbeständig |
TOUGHCable Connectors 100er Pack | 1 | 58,49€ (Preis varia-store) | 58,49€ | RJ45 Stecker für TOUGHCable |
Crimpzange Westernstecker RJ11/12/45 Knipex | 1 | 25,55€ (Preis Völkner) | 25,55€ | |
3er Steckdosenleisten | 20 | 4,08€ (Preis Völkner) | 81,60€ | |
Kabelbinder | 300 | ca. 5€ (100ST) (Preis Völkner) | 15€ | |
Toolcraft Panzertape | 4 | 15,17€ (Preis Völkner) | 60,68€ | |
HP ProLiant DL380 G5 2x Xeon E5450 | 1 | 249,99€ (Preis servershop24) | 249,99€ | Server |
HP NC364T Quad Port Gigabit Server Adapter | 1 | 49,99€ (Preis servershop24) | 49,99€ | 4x Port RJ45 Netzwerkkarte |
750 VA Smart-UPS SUA750RMI1U | 1 | 537,53€ (Preis Völkner) | 537,53€ | USV |
Summe | 4588,98€ |
- Kostenaufstellung für das Projekt vom 12.10.2015
Uplink
Art | Anzahl | Einzelpreis | Gesamt | Kommentar |
---|---|---|---|---|
Nanobeam-ac | 4 | 170€ | 680 € | Richtfunk Link HSRM <---> FW1 <--> Simeonhaus |
Nanobeam-ac | 2 | 170€ | 340€ | Optional wenn eine Relay gebraucht wird |
Switch + Outdoor Box | 1 | 100 € | 100 € | 2. Uplink HSRM |
Kabel und Kleinmaterial | 1 | 100 € | 100 € | |
Summe | 1220€ |
Bau 1 / Haus B+C
Art | Anzahl | Einzelpreis | Gesammt | Kommentar |
---|---|---|---|---|
Wlan AP indoor | 16 (35) | 60€ | 960€ | TP Link 3600 oder vergleichbar |
Wlan AP outdoor | 2 | 70€ | 140€ | Cpe 210 oder vergleichbar |
Kabel und Kleinmaterial | 1 | 350 € | 350 € | |
Handwerkerleistungen | 8h | 50 € | 400 € | Bohrungen und Installationsarbeiten |
Summe | 1850€ |
Bau 2 / Haus E
Art | Anzahl | Einzelpreis | Gesammt | Kommentar |
---|---|---|---|---|
Loco M5 | 2 | 80€ | 160€ | Verbindung Bau B Bau E mit Richtfunk |
Wlan AP indoor | 14 | 60€ | 840€ | TP Link 3600 oder vergleichbar |
Wlan AP outdoor | 2 | 70€ | 140€ | Cpe 210 oder vergleichbar |
Kabel und Kleinmaterial | 1 | 350 € | 350 € | |
Handwerkerleistungen | 8h | 50 € | 400 € | Bohrungen und Installationsarbeiten |
Summe | 1890€ |
Bau 3 / Haus D
Art | Anzahl | Einzelpreis | Gesammt | Kommentar |
---|---|---|---|---|
Loco M5 | 2 | 80€ | 160€ | Verbindung Bau B Bau D mit Richtfunk |
Wlan AP indoor | 14 | 60€ | 840€ | TP Link 3600 oder vergleichbar |
Wlan AP outdoor | 2 | 70€ | 140€ | Cpe 210 oder vergleichbar |
Kabel und Kleinmaterial | 1 | 350 € | 350 € | |
Handwerkerleistungen | 8h | 50 € | 400 € | Bohrungen und Installationsarbeiten |
Summe | 1890€ |
Summe
Art | Anzahl | Einzelpreis | Gesammt | Kommentar |
---|---|---|---|---|
uplink | 1220 € | |||
Bau 1 / Haus B+C | 1850 € | |||
Bau 2 / Haus E | 1890 € | |||
Bau 3 / Haus D | 1890 € | |||
Summe | 6850 € |
Dokumente
Medium:Simeonhaus_entwurf.odt Medium:sim_plan.pdf