Wiesbaden/Projekte/Hans Bredow Straße: Unterschied zwischen den Versionen
Kokel (Diskussion | Beiträge) |
Kokel (Diskussion | Beiträge) |
||
(80 dazwischenliegende Versionen von 3 Benutzern werden nicht angezeigt) | |||
Zeile 9: | Zeile 9: | ||
| Verantwortlicher || GÜ-NN1 | | Verantwortlicher || GÜ-NN1 | ||
|- | |- | ||
− | | Mitglieder || Axel, Benito, GÜ-NN1, Peter, Volker | + | | Mitglieder || Axel, Benito, GÜ-NN1, Peter, Volker, Kokel |
+ | |- | ||
+ | | Planungs-Mailing-Liste || [https://lists.freifunk-mwu.de/mailman/listinfo/hans Hans] | ||
|- | |- | ||
| Berichtsturnus || auf ML | | Berichtsturnus || auf ML | ||
Zeile 22: | Zeile 24: | ||
==aktueller Stand== | ==aktueller Stand== | ||
− | * 2016-03-03 | | + | * 2016-11-22 | 01 Pers. X 01 h | Server neustarten, 1x WR1043ND installiert |
− | * 2016-02-02 | 03 h | Vor-Ort-Termin | + | * 2016-11-15 | 01 Pers. X 02 h | Server neustarten, 2x CPEs + 1x 841er konfiguriert |
+ | * 2016-11-11 | 01 Pers. X 01 h | Server neustarten, Gespraeche, Router umstecken | ||
+ | * 2016-10-10 | 01 Pers. X 02 h | Wartung; Config-Reset einer CPE; Umpatchung einer CPE | ||
+ | * 2016-09-11 | 01 Pers. X 02 h | Inbetriebnahme Switche 1-3/Technikraum EG; Ausrichtung PBE-5AC-400 in Richtung Opelbad; Einweisung Hausmeister umpatchen CPEs | ||
+ | * 2016-08-25 | 02 Pers. X 02 h | Ausrichtung NB5-AC zu Weilstraße | ||
+ | * 2016-08-12 | 01 Pers. X 01 h | Telekomrouter konfiguriert | ||
+ | * 2016-07-10 | 02 Pers. X 04 h | 4 Kabel gecrimpt, Server + Gluon-VM konfiguriert | ||
+ | * 2016-07-06 | 02 Pers. X 03 h | 2 Kabel gecrimpt, 2 Switche konfiguriert, 2 PBE-5AC-400 ausgerichtet + konfiguriert | ||
+ | * 2016-05-15 | 01 Pers. X 05 h | Switche/USV in Schrank montiert | ||
+ | * 2016-05-14 | 02 Pers. X 08 h | Installation vom Server, Switche/USV in Schrank montiert | ||
+ | * 2016-05-11 | 02 Pers. X 02 h | Einlagerung der bestellten Hardware zur Weiternutzung | ||
+ | * 2016-03-03 | 04 Pers. X 03 h | Ausmessung eines Stockwerkes und Bedarfsfestlegung (Bestellung Hardware) | ||
+ | * 2016-02-02 | 03 Pers. X 01 h | Vor-Ort-Termin | ||
==Lokationsbeschreibung== | ==Lokationsbeschreibung== | ||
Zeile 49: | Zeile 63: | ||
==Technik== | ==Technik== | ||
+ | |||
+ | '''Folgende Richtlinien sollen gelten:''' | ||
+ | * VLAN 5 = Freifunk Client Netz | ||
+ | * VLANs 100-121/201-222/301-316/401-422/501-512 = Untagged VLANs für CPE210/TL-WR841N | ||
+ | * VLANs 11-22 = Tagged VLANs für Richtfunk | ||
+ | * CPE210 = Mesh-On-LAN/-WAN aktiviert | ||
+ | * TL-WR841N = Mesh-On-LAN/-WAN/-WiFi aktiviert | ||
+ | |||
+ | '''Port-Legende''': "'''X''' '''YZ''' '''YZ''' .. " <br /> | ||
+ | |||
+ | '''X''': Port-Bezeichnung (Gerät, nicht Software intern)<br /> | ||
+ | '''Y''': VLAN-ID<br /> | ||
+ | '''Z''': U = Untagged, T = Tagged | ||
+ | |||
+ | '''WLAN-Legende''': "'''CX'''/'''MX'''" <br /> | ||
+ | |||
+ | '''C''': Client-WLAN<br /> | ||
+ | '''M''': Mesh-WLAN<br /> | ||
+ | '''X''': 0 = deaktiviert; >0 = WLAN-Kanal (+ aktiviert)<br /> | ||
+ | |||
+ | |||
+ | ===End-Geräte Knoten=== | ||
+ | Client-WLAN sind alle auf 2,4GHz eingestellt | ||
+ | |||
+ | {| class="wikitable sortable" | ||
+ | |- | ||
+ | ! style="text-align:center" class="unsortable" | Lfd. Nr. | ||
+ | ! Knotenname | ||
+ | ! Standort | ||
+ | ! Routertyp | ||
+ | ! Firmware | ||
+ | ! 2,4GHz | ||
+ | ! IPv4 | ||
+ | ! Kommentar | ||
+ | ! In Betrieb | ||
+ | |- | ||
+ | | 01. | ||
+ | | HanS-EG-1 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C01/M00 | ||
+ | | 10.56.8.1 | ||
+ | | | ||
+ | | nein | ||
+ | |- | ||
+ | | 02. | ||
+ | | HanS-EG-2 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C05/M00 | ||
+ | | 10.56.8.2 | ||
+ | | | ||
+ | | nein | ||
+ | |- | ||
+ | | 03. | ||
+ | | HanS-EG-3 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C09/M00 | ||
+ | | 10.56.8.3 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 04. | ||
+ | | HanS-EG-4 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C13/M00 | ||
+ | | 10.56.8.4 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 05. | ||
+ | | HanS-1.OG-1 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C13/M00 | ||
+ | | 10.56.8.5 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 06. | ||
+ | | HanS-1.OG-2 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C09/M00 | ||
+ | | 10.56.8.6 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 07. | ||
+ | | HanS-1.OG-3 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C05/M00 | ||
+ | | 10.56.8.7 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 08. | ||
+ | | HanS-1.OG-4 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C01/M00 | ||
+ | | 10.56.8.8 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 09. | ||
+ | | HanS-2.OG-1 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C01/M00 | ||
+ | | 10.56.8.9 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 10. | ||
+ | | HanS-2.OG-2 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C05/M00 | ||
+ | | 10.56.8.10 | ||
+ | | | ||
+ | | nein | ||
+ | |- | ||
+ | | 11. | ||
+ | | HanS-2.OG-3 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C09/M00 | ||
+ | | 10.56.8.11 | ||
+ | | | ||
+ | | nein | ||
+ | |- | ||
+ | | 12. | ||
+ | | HanS-2.OG-4 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C13/M00 | ||
+ | | 10.56.8.12 | ||
+ | | | ||
+ | | nein | ||
+ | |- | ||
+ | | 13. | ||
+ | | HanS-3.OG-1 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C13/M00 | ||
+ | | 10.56.8.13 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 14. | ||
+ | | HanS-3.OG-2 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C09/M00 | ||
+ | | 10.56.8.14 | ||
+ | | | ||
+ | | nein | ||
+ | |- | ||
+ | | 15. | ||
+ | | HanS-3.OG-3 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C05/M00 | ||
+ | | 10.56.8.15 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 16. | ||
+ | | HanS-3.OG-4 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C01/M00 | ||
+ | | 10.56.8.16 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 17. | ||
+ | | HanS-4.OG-1 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C01/M00 | ||
+ | | 10.56.8.17 | ||
+ | | | ||
+ | | nein | ||
+ | |- | ||
+ | | 18. | ||
+ | | HanS-4.OG-2 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C05/M00 | ||
+ | | 10.56.8.18 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 19. | ||
+ | | HanS-4.OG-3 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C09/M00 | ||
+ | | 10.56.8.19 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 20. | ||
+ | | HanS-4.OG-4 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C13/M00 | ||
+ | | 10.56.8.20 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 21. | ||
+ | | HanS-5.OG-1 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C13/M00 | ||
+ | | 10.56.8.21 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 22. | ||
+ | | HanS-5.OG-2 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C09/M00 | ||
+ | | 10.56.8.22 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 23. | ||
+ | | HanS-5.OG-3 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C05/M00 | ||
+ | | 10.56.8.23 | ||
+ | | | ||
+ | | nein | ||
+ | |- | ||
+ | | 24. | ||
+ | | HanS-5.OG-4 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C01/M00 | ||
+ | | 10.56.8.24 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 25. | ||
+ | | HanS-6.OG-1 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C01/M00 | ||
+ | | 10.56.8.25 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 26. | ||
+ | | HanS-6.OG-2 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C05/M00 | ||
+ | | 10.56.8.26 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 27. | ||
+ | | HanS-6.OG-3 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C09/M00 | ||
+ | | 10.56.8.27 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 28. | ||
+ | | HanS-6.OG-4 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C13/M00 | ||
+ | | 10.56.8.28 | ||
+ | | | ||
+ | | nein | ||
+ | |- | ||
+ | | 29. | ||
+ | | HanS-7.OG-1 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C13/M00 | ||
+ | | 10.56.8.29 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 30. | ||
+ | | HanS-7.OG-2 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C09/M00 | ||
+ | | 10.56.8.30 | ||
+ | | | ||
+ | | nein | ||
+ | |- | ||
+ | | 31. | ||
+ | | HanS-7.OG-3 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C05/M00 | ||
+ | | 10.56.8.31 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 32. | ||
+ | | HanS-7.OG-4 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C01/M00 | ||
+ | | 10.56.8.32 | ||
+ | | | ||
+ | | nein | ||
+ | |- | ||
+ | | 33. | ||
+ | | HanS-8.OG-1 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C01/M00 | ||
+ | | 10.56.8.33 | ||
+ | | | ||
+ | | nein | ||
+ | |- | ||
+ | | 34. | ||
+ | | HanS-8.OG-2 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C05/M00 | ||
+ | | 10.56.8.34 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 35. | ||
+ | | HanS-8.OG-3 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C09/M00 | ||
+ | | 10.56.8.35 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 36. | ||
+ | | HanS-8.OG-4 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | PharOS | ||
+ | | C13/M00 | ||
+ | | 10.56.8.36 | ||
+ | | | ||
+ | | ja | ||
+ | |- | ||
+ | | 37. | ||
+ | | HanS-Flur-EG-1 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | Gluon | ||
+ | | C01/M01 | ||
+ | | | ||
+ | | Mesh mit HanS-Flur-EG-1.1 | ||
+ | | ja | ||
+ | |- | ||
+ | | 38. | ||
+ | | HanS-Flur-EG-1.1 | ||
+ | | | ||
+ | | TL-WR841N | ||
+ | | Gluon | ||
+ | | C01/M01 | ||
+ | | | ||
+ | | Mesh mit HanS-Flur-EG-1 | ||
+ | | nein | ||
+ | |- | ||
+ | | 39. | ||
+ | | HanS-Flur-EG-2 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | Gluon | ||
+ | | C05/M05 | ||
+ | | | ||
+ | | Mesh mit HanS-Flur-EG-2.1 | ||
+ | | ja | ||
+ | |- | ||
+ | | 40. | ||
+ | | HanS-Flur-EG-2.1 | ||
+ | | | ||
+ | | TL-WR841N | ||
+ | | Gluon | ||
+ | | C05/M05 | ||
+ | | | ||
+ | | Mesh mit HanS-Flur-EG-2 | ||
+ | | nein | ||
+ | |- | ||
+ | | 41. | ||
+ | | HanS-Flur-1.OG-1 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | Gluon | ||
+ | | C09/M09 | ||
+ | | | ||
+ | | Mesh mit HanS-Flur-1.OG-1.1 | ||
+ | | nein | ||
+ | |- | ||
+ | | 42. | ||
+ | | HanS-Flur-1.OG-1.1 | ||
+ | | | ||
+ | | TL-WR841N | ||
+ | | Gluon | ||
+ | | C09/M09 | ||
+ | | | ||
+ | | Mesh mit HanS-Flur-1.OG-1 | ||
+ | | nein | ||
+ | |- | ||
+ | | 43. | ||
+ | | HanS-Flur-1.OG-2 | ||
+ | | | ||
+ | | CPE210 v1.1 | ||
+ | | Gluon | ||
+ | | C13/M13 | ||
+ | | | ||
+ | | Mesh mit HanS-Flur-1.OG-2.1 | ||
+ | | nein | ||
+ | |- | ||
+ | | 44. | ||
+ | | HanS-Flur-1.OG-2.1 | ||
+ | | | ||
+ | | TL-WR841N | ||
+ | | Gluon | ||
+ | | C13/M13 | ||
+ | | | ||
+ | | Mesh mit HanS-Flur-1.OG-2 | ||
+ | | nein | ||
+ | |} | ||
+ | |||
+ | |||
+ | ==== WLAN-Kanäle bei IEEE 802.11g und 802.11n (2,4 GHz überlappungsfrei bei 20 MHz Kanalbreite) ==== | ||
+ | |||
+ | |||
+ | [[Datei:WLAN_2_4_20mhz.png]] | ||
+ | |||
+ | Quelle: [http://www.elektronik-kompendium.de/sites/net/1712061.htm www.elektronik-kompendium.de ] | ||
+ | |||
+ | ===Richtfunk=== | ||
+ | |||
+ | {| class="wikitable sortable" | ||
+ | |- | ||
+ | ! style="text-align:center" class="unsortable" | Lfd. Nr. | ||
+ | ! Knotenname | ||
+ | ! Standort | ||
+ | ! Routertyp | ||
+ | ! nach | ||
+ | ! Kommentar | ||
+ | |- | ||
+ | | 01. | ||
+ | | ffmwu-hans-fw1 | ||
+ | | | ||
+ | | PowerBeam 5AC 400 | ||
+ | | FW1 | ||
+ | | AP PtP ffmwu-hans-fw1-11ac | ||
+ | |- | ||
+ | | 02. | ||
+ | | ffmwu-hans-opel | ||
+ | | | ||
+ | | PowerBeam 5AC 400 | ||
+ | | Opel | ||
+ | | AP PtP ffmwu-hans-opel-11ac | ||
+ | |- | ||
+ | | 03. | ||
+ | | ffmwu-Accesspoint-client-Standort | ||
+ | | | ||
+ | | PowerBeam 5AC 400 | ||
+ | | | ||
+ | | Point-to-Point | ||
+ | |- | ||
+ | | 04. | ||
+ | | ffmwu-Accesspoint-client-Standort | ||
+ | | | ||
+ | | PowerBeam 5AC 400 | ||
+ | | | ||
+ | | Point-to-Point | ||
+ | |- | ||
+ | | 05. | ||
+ | | ffmwu-Accesspoint-client-Standort | ||
+ | | | ||
+ | | NanoBeam 5AC 19 | ||
+ | | | ||
+ | | Point-to-Point | ||
+ | |- | ||
+ | | 06. | ||
+ | | ffmwu-Accesspoint-client-Standort | ||
+ | | | ||
+ | | NanoBeam 5AC 19 | ||
+ | | | ||
+ | | Point-to-Point | ||
+ | |- | ||
+ | | 07. | ||
+ | | ffmwu-Accesspoint-client-Standort | ||
+ | | | ||
+ | | NanoBeam 5AC 19 | ||
+ | | | ||
+ | | Point-to-Point | ||
+ | |- | ||
+ | | 08. | ||
+ | | ffmwu-Accesspoint-client-Standort | ||
+ | | | ||
+ | | NanoBeam 5AC 19 | ||
+ | | | ||
+ | | Point-to-Point | ||
+ | |- | ||
+ | | 09. | ||
+ | | ffmwu-hans-11ac-116 | ||
+ | | | ||
+ | | LiteBeam 5AC 16 120 | ||
+ | | Luisenstraße | ||
+ | | Point-to-Multipoint | ||
+ | |- | ||
+ | | 10. | ||
+ | | ffmwu-hans-weil | ||
+ | | | ||
+ | | NanoBeam 5AC 19 | ||
+ | | Weil | ||
+ | | Point-to-Point | ||
+ | |- | ||
+ | |} | ||
+ | |||
===Switche=== | ===Switche=== | ||
− | + | Portbelegung der 5 [https://www.ubnt.com/edgemax/edgeswitch/ Ubiquiti EdgeSwitch ES-24-250W], die in den Racks verbaut sind | |
==== HanS-EG-Switch-1 ==== | ==== HanS-EG-Switch-1 ==== | ||
Zeile 60: | Zeile 642: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
− | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
| 1 | | 1 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 1.1 | | WLAN EG 1.1 | ||
Zeile 70: | Zeile 652: | ||
|- | |- | ||
| 2 | | 2 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 1.2 | | WLAN EG 1.2 | ||
Zeile 76: | Zeile 658: | ||
|- | |- | ||
| 3 | | 3 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 2.1 | | WLAN EG 2.1 | ||
Zeile 82: | Zeile 664: | ||
|- | |- | ||
| 4 | | 4 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 2.2 | | WLAN EG 2.2 | ||
Zeile 88: | Zeile 670: | ||
|- | |- | ||
| 5 | | 5 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 3.1 | | WLAN EG 3.1 | ||
Zeile 94: | Zeile 676: | ||
|- | |- | ||
| 6 | | 6 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 3.2 | | WLAN EG 3.2 | ||
Zeile 100: | Zeile 682: | ||
|- | |- | ||
| 7 | | 7 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 4.1 | | WLAN EG 4.1 | ||
Zeile 106: | Zeile 688: | ||
|- | |- | ||
| 8 | | 8 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 4.2 | | WLAN EG 4.2 | ||
Zeile 112: | Zeile 694: | ||
|- | |- | ||
| 9 | | 9 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 1.1 | | WLAN 1.OG 1.1 | ||
Zeile 118: | Zeile 700: | ||
|- | |- | ||
| 10 | | 10 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 1.2 | | WLAN 1.OG 1.2 | ||
Zeile 124: | Zeile 706: | ||
|- | |- | ||
| 11 | | 11 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 2.1 | | WLAN 1.OG 2.1 | ||
Zeile 130: | Zeile 712: | ||
|- | |- | ||
| 12 | | 12 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 2.2 | | WLAN 1.OG 2.2 | ||
Zeile 136: | Zeile 718: | ||
|- | |- | ||
| 13 | | 13 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 3.1 | | WLAN 1.OG 3.1 | ||
Zeile 142: | Zeile 724: | ||
|- | |- | ||
| 14 | | 14 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 3.2 | | WLAN 1.OG 3.2 | ||
Zeile 148: | Zeile 730: | ||
|- | |- | ||
| 15 | | 15 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 4.1 | | WLAN 1.OG 4.1 | ||
Zeile 154: | Zeile 736: | ||
|- | |- | ||
| 16 | | 16 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 4.2 | | WLAN 1.OG 4.2 | ||
Zeile 160: | Zeile 742: | ||
|- | |- | ||
| 17 | | 17 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 2.OG 1.1 | | WLAN 2.OG 1.1 | ||
Zeile 166: | Zeile 748: | ||
|- | |- | ||
| 18 | | 18 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 2.OG 1.2 | | WLAN 2.OG 1.2 | ||
Zeile 172: | Zeile 754: | ||
|- | |- | ||
| 19 | | 19 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 2.OG 2.1 | | WLAN 2.OG 2.1 | ||
Zeile 178: | Zeile 760: | ||
|- | |- | ||
| 20 | | 20 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 2.OG 2.2 | | WLAN 2.OG 2.2 | ||
Zeile 184: | Zeile 766: | ||
|- | |- | ||
| 21 | | 21 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 22 | | 22 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
− | | | + | | RaspberryPi B+ |
− | | | + | | disabled |
|- | |- | ||
| 23 | | 23 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
− | | Out-of-Band Mgmt | + | | frei/Out-of-Band Mgmt |
| disabled | | disabled | ||
|- | |- | ||
| 24 | | 24 | ||
− | | | + | | 4 |
| tagged | | tagged | ||
− | | Panel-A Port 1 | + | | Panel-A Port 1/Server-Port enp2s0f1 |
| disabled | | disabled | ||
|} | |} | ||
− | |||
==== HanS-EG-Switch-2 ==== | ==== HanS-EG-Switch-2 ==== | ||
Zeile 216: | Zeile 797: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
− | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
| 1 | | 1 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 2.OG 3.1 | | WLAN 2.OG 3.1 | ||
Zeile 226: | Zeile 807: | ||
|- | |- | ||
| 2 | | 2 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 2.OG 3.2 | | WLAN 2.OG 3.2 | ||
Zeile 232: | Zeile 813: | ||
|- | |- | ||
| 3 | | 3 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 2.OG 4.1 | | WLAN 2.OG 4.1 | ||
Zeile 238: | Zeile 819: | ||
|- | |- | ||
| 4 | | 4 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 2.OG 4.2 | | WLAN 2.OG 4.2 | ||
Zeile 244: | Zeile 825: | ||
|- | |- | ||
| 5 | | 5 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 3.OG 1.1 | | WLAN 3.OG 1.1 | ||
Zeile 250: | Zeile 831: | ||
|- | |- | ||
| 6 | | 6 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 3.OG 1.2 | | WLAN 3.OG 1.2 | ||
Zeile 256: | Zeile 837: | ||
|- | |- | ||
| 7 | | 7 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 3.OG 2.1 | | WLAN 3.OG 2.1 | ||
Zeile 262: | Zeile 843: | ||
|- | |- | ||
| 8 | | 8 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 3.OG 2.2 | | WLAN 3.OG 2.2 | ||
Zeile 268: | Zeile 849: | ||
|- | |- | ||
| 9 | | 9 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 3.OG 3.1 | | WLAN 3.OG 3.1 | ||
Zeile 274: | Zeile 855: | ||
|- | |- | ||
| 10 | | 10 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 3.OG 3.2 | | WLAN 3.OG 3.2 | ||
Zeile 280: | Zeile 861: | ||
|- | |- | ||
| 11 | | 11 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 3.OG 4.1 | | WLAN 3.OG 4.1 | ||
Zeile 286: | Zeile 867: | ||
|- | |- | ||
| 12 | | 12 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 3.OG 4.2 | | WLAN 3.OG 4.2 | ||
Zeile 292: | Zeile 873: | ||
|- | |- | ||
| 13 | | 13 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 4.OG 1.1 | | WLAN 4.OG 1.1 | ||
Zeile 298: | Zeile 879: | ||
|- | |- | ||
| 14 | | 14 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 4.OG 1.2 | | WLAN 4.OG 1.2 | ||
Zeile 304: | Zeile 885: | ||
|- | |- | ||
| 15 | | 15 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 4.OG 2.1 | | WLAN 4.OG 2.1 | ||
Zeile 310: | Zeile 891: | ||
|- | |- | ||
| 16 | | 16 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 4.OG 2.2 | | WLAN 4.OG 2.2 | ||
Zeile 316: | Zeile 897: | ||
|- | |- | ||
| 17 | | 17 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 4.OG 3.1 | | WLAN 4.OG 3.1 | ||
Zeile 322: | Zeile 903: | ||
|- | |- | ||
| 18 | | 18 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 4.OG 3.2 | | WLAN 4.OG 3.2 | ||
Zeile 328: | Zeile 909: | ||
|- | |- | ||
| 19 | | 19 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 4.OG 4.1 | | WLAN 4.OG 4.1 | ||
Zeile 334: | Zeile 915: | ||
|- | |- | ||
| 20 | | 20 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 4.OG 4.2 | | WLAN 4.OG 4.2 | ||
Zeile 340: | Zeile 921: | ||
|- | |- | ||
| 21 | | 21 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 22 | | 22 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 23 | | 23 | ||
− | | 5 | + | | 5,317-322 |
− | | | + | | tagged |
− | | | + | | ffmwu-hans-sw03 Port 24 |
| disabled | | disabled | ||
|- | |- | ||
| 24 | | 24 | ||
− | | 5, | + | | 5,301,303,317-322 |
| tagged | | tagged | ||
− | | Panel-A Port 2 | + | | Panel-A Port 2/Server-Port ens1f0 |
| disabled | | disabled | ||
|} | |} | ||
Zeile 371: | Zeile 952: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
− | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
Zeile 377: | Zeile 958: | ||
| 301 | | 301 | ||
| untagged | | untagged | ||
− | | WLAN Flur EG 1 | + | | WLAN Flur EG 1.1 |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 2 | | 2 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | WLAN Flur EG 2 | + | | WLAN Flur EG 1.2 |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 3 | | 3 | ||
+ | | 5 | ||
| 303 | | 303 | ||
− | + | | WLAN Flur EG 2.1 | |
− | | WLAN Flur | ||
| 24V passive | | 24V passive | ||
|- | |- | ||
| 4 | | 4 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | WLAN Flur | + | | WLAN Flur EG 2.2 |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 5 | | 5 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | WLAN Flur 1.OG 1.1 |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 6 | | 6 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | WLAN Flur 1.OG 1.2 |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 7 | | 7 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | WLAN Flur 1.OG 2.1 |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 8 | | 8 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | WLAN Flur 1.OG 2.2 |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 9 | | 9 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 10 | | 10 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 11 | | 11 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 12 | | 12 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 13 | | 13 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 14 | | 14 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 15 | | 15 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 16 | | 16 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 17 | | 17 | ||
− | | 5, | + | | 5,317 |
| tagged | | tagged | ||
| Dach 4.1 | | Dach 4.1 | ||
Zeile 477: | Zeile 1.058: | ||
|- | |- | ||
| 18 | | 18 | ||
− | | 5, | + | | 5,318 |
| tagged | | tagged | ||
| Dach 4.2 | | Dach 4.2 | ||
Zeile 483: | Zeile 1.064: | ||
|- | |- | ||
| 19 | | 19 | ||
− | | 5, | + | | 5,319 |
| tagged | | tagged | ||
| Dach 5.1 | | Dach 5.1 | ||
Zeile 489: | Zeile 1.070: | ||
|- | |- | ||
| 20 | | 20 | ||
− | | 5, | + | | 5,320 |
| tagged | | tagged | ||
| Dach 5.2 | | Dach 5.2 | ||
Zeile 495: | Zeile 1.076: | ||
|- | |- | ||
| 21 | | 21 | ||
− | | 5, | + | | 5,321 |
| tagged | | tagged | ||
| Dach 6.1 | | Dach 6.1 | ||
Zeile 501: | Zeile 1.082: | ||
|- | |- | ||
| 22 | | 22 | ||
− | | 5, | + | | 5,322 |
| tagged | | tagged | ||
| Dach 6.2 | | Dach 6.2 | ||
Zeile 513: | Zeile 1.094: | ||
|- | |- | ||
| 24 | | 24 | ||
− | | 5, | + | | 5,301,303,317-322 |
| tagged | | tagged | ||
− | | | + | | ffmwu-hans-sw02 Port 23 |
| disabled | | disabled | ||
|} | |} | ||
− | |||
==== HanS-8OG-Switch-4 ==== | ==== HanS-8OG-Switch-4 ==== | ||
Zeile 527: | Zeile 1.107: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
− | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
| 1 | | 1 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 5.OG 1.1 | | WLAN 5.OG 1.1 | ||
Zeile 537: | Zeile 1.117: | ||
|- | |- | ||
| 2 | | 2 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 5.OG 1.2 | | WLAN 5.OG 1.2 | ||
Zeile 543: | Zeile 1.123: | ||
|- | |- | ||
| 3 | | 3 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 5.OG 2.1 | | WLAN 5.OG 2.1 | ||
Zeile 549: | Zeile 1.129: | ||
|- | |- | ||
| 4 | | 4 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 5.OG 2.2 | | WLAN 5.OG 2.2 | ||
Zeile 555: | Zeile 1.135: | ||
|- | |- | ||
| 5 | | 5 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 5.OG 3.1 | | WLAN 5.OG 3.1 | ||
Zeile 561: | Zeile 1.141: | ||
|- | |- | ||
| 6 | | 6 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 5.OG 3.2 | | WLAN 5.OG 3.2 | ||
Zeile 567: | Zeile 1.147: | ||
|- | |- | ||
| 7 | | 7 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 5.OG 4.1 | | WLAN 5.OG 4.1 | ||
Zeile 573: | Zeile 1.153: | ||
|- | |- | ||
| 8 | | 8 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 5.OG 4.2 | | WLAN 5.OG 4.2 | ||
Zeile 579: | Zeile 1.159: | ||
|- | |- | ||
| 9 | | 9 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 6.OG 1.1 | | WLAN 6.OG 1.1 | ||
Zeile 585: | Zeile 1.165: | ||
|- | |- | ||
| 10 | | 10 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 6.OG 1.2 | | WLAN 6.OG 1.2 | ||
Zeile 591: | Zeile 1.171: | ||
|- | |- | ||
| 11 | | 11 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 6.OG 2.1 | | WLAN 6.OG 2.1 | ||
Zeile 597: | Zeile 1.177: | ||
|- | |- | ||
| 12 | | 12 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 6.OG 2.2 | | WLAN 6.OG 2.2 | ||
Zeile 603: | Zeile 1.183: | ||
|- | |- | ||
| 13 | | 13 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 6.OG 3.1 | | WLAN 6.OG 3.1 | ||
Zeile 609: | Zeile 1.189: | ||
|- | |- | ||
| 14 | | 14 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 6.OG 3.2 | | WLAN 6.OG 3.2 | ||
Zeile 615: | Zeile 1.195: | ||
|- | |- | ||
| 15 | | 15 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 6.OG 4.1 | | WLAN 6.OG 4.1 | ||
Zeile 621: | Zeile 1.201: | ||
|- | |- | ||
| 16 | | 16 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 6.OG 4.2 | | WLAN 6.OG 4.2 | ||
Zeile 627: | Zeile 1.207: | ||
|- | |- | ||
| 17 | | 17 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 7.OG 1.1 | | WLAN 7.OG 1.1 | ||
Zeile 633: | Zeile 1.213: | ||
|- | |- | ||
| 18 | | 18 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 7.OG 1.2 | | WLAN 7.OG 1.2 | ||
Zeile 639: | Zeile 1.219: | ||
|- | |- | ||
| 19 | | 19 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 7.OG 2.1 | | WLAN 7.OG 2.1 | ||
Zeile 645: | Zeile 1.225: | ||
|- | |- | ||
| 20 | | 20 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 7.OG 2.2 | | WLAN 7.OG 2.2 | ||
Zeile 651: | Zeile 1.231: | ||
|- | |- | ||
| 21 | | 21 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | TL-WR841N |
− | | | + | | disabled |
|- | |- | ||
| 22 | | 22 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
Zeile 669: | Zeile 1.249: | ||
|- | |- | ||
| 24 | | 24 | ||
− | | 5 | + | | 5 |
| tagged | | tagged | ||
− | | | + | | ffmwu-hans-sw05 Port 23 |
| disabled | | disabled | ||
− | |} | + | |} |
==== HanS-8OG-Switch-5 ==== | ==== HanS-8OG-Switch-5 ==== | ||
Zeile 682: | Zeile 1.262: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
− | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
| 1 | | 1 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 7.OG 3.1 | | WLAN 7.OG 3.1 | ||
Zeile 692: | Zeile 1.272: | ||
|- | |- | ||
| 2 | | 2 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 7.OG 3.2 | | WLAN 7.OG 3.2 | ||
Zeile 698: | Zeile 1.278: | ||
|- | |- | ||
| 3 | | 3 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 7.OG 4.1 | | WLAN 7.OG 4.1 | ||
Zeile 704: | Zeile 1.284: | ||
|- | |- | ||
| 4 | | 4 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 7.OG 4.2 | | WLAN 7.OG 4.2 | ||
Zeile 710: | Zeile 1.290: | ||
|- | |- | ||
| 5 | | 5 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 8.OG 1.1 | | WLAN 8.OG 1.1 | ||
Zeile 716: | Zeile 1.296: | ||
|- | |- | ||
| 6 | | 6 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 8.OG 1.2 | | WLAN 8.OG 1.2 | ||
Zeile 722: | Zeile 1.302: | ||
|- | |- | ||
| 7 | | 7 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 8.OG 2.1 | | WLAN 8.OG 2.1 | ||
Zeile 728: | Zeile 1.308: | ||
|- | |- | ||
| 8 | | 8 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 8.OG 2.2 | | WLAN 8.OG 2.2 | ||
Zeile 734: | Zeile 1.314: | ||
|- | |- | ||
| 9 | | 9 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 8.OG 3.1 | | WLAN 8.OG 3.1 | ||
Zeile 740: | Zeile 1.320: | ||
|- | |- | ||
| 10 | | 10 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 8.OG 3.2 | | WLAN 8.OG 3.2 | ||
Zeile 746: | Zeile 1.326: | ||
|- | |- | ||
| 11 | | 11 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 8.OG 4.1 | | WLAN 8.OG 4.1 | ||
Zeile 752: | Zeile 1.332: | ||
|- | |- | ||
| 12 | | 12 | ||
− | | | + | | 5 |
| untagged | | untagged | ||
| WLAN 8.OG 4.2 | | WLAN 8.OG 4.2 | ||
Zeile 758: | Zeile 1.338: | ||
|- | |- | ||
| 13 | | 13 | ||
− | | 5, | + | | 5,513 |
| tagged | | tagged | ||
| Dach 1.1 | | Dach 1.1 | ||
Zeile 764: | Zeile 1.344: | ||
|- | |- | ||
| 14 | | 14 | ||
− | | 5, | + | | 5,514 |
| tagged | | tagged | ||
| Dach 1.2 | | Dach 1.2 | ||
Zeile 770: | Zeile 1.350: | ||
|- | |- | ||
| 15 | | 15 | ||
− | | 5, | + | | 5,515 |
| tagged | | tagged | ||
| Dach 2.1 | | Dach 2.1 | ||
Zeile 776: | Zeile 1.356: | ||
|- | |- | ||
| 16 | | 16 | ||
− | | 5, | + | | 5,516 |
| tagged | | tagged | ||
| Dach 2.2 | | Dach 2.2 | ||
Zeile 782: | Zeile 1.362: | ||
|- | |- | ||
| 17 | | 17 | ||
− | | 5, | + | | 5,517 |
| tagged | | tagged | ||
| Dach 3.1 | | Dach 3.1 | ||
Zeile 788: | Zeile 1.368: | ||
|- | |- | ||
| 18 | | 18 | ||
− | | 5, | + | | 5,518 |
| tagged | | tagged | ||
| Dach 3.2 | | Dach 3.2 | ||
Zeile 794: | Zeile 1.374: | ||
|- | |- | ||
| 19 | | 19 | ||
− | | | + | | 5 |
− | | | + | | untagged |
− | | | + | | frei |
− | | | + | | 24V passive |
|- | |- | ||
| 20 | | 20 | ||
− | | | + | | 6 |
− | | | + | | tagged |
− | | | + | | Telekom Uplink |
− | | | + | | disabled |
|- | |- | ||
| 21 | | 21 | ||
− | | | + | | 5 |
− | | | + | | untagged |
− | | - | + | | integrated Lights-Out (iLO) |
− | | | + | | disabled |
|- | |- | ||
| 22 | | 22 | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
− | | | + | | Out-of-Band Mgmt |
| disabled | | disabled | ||
|- | |- | ||
| 23 | | 23 | ||
| 5 | | 5 | ||
− | | | + | | tagged |
− | | | + | | ffmwu-hans-sw04 Port 24 |
| disabled | | disabled | ||
|- | |- | ||
| 24 | | 24 | ||
− | | 5, | + | | 5,513-518 |
| tagged | | tagged | ||
− | | Server-Port | + | | Server-Port ens1f1 |
| disabled | | disabled | ||
|} | |} | ||
+ | |||
+ | ===Server=== | ||
+ | *Modell:HP ProLiant DL380 G5 2x Xeon E5450 | ||
+ | *Betriebssystem: Ubuntu 16.04 LTS | ||
+ | *Virtualisierung: KVM/QEMU | ||
+ | |||
+ | ====Netzwerk Config==== | ||
+ | Installation Open vSwitch | ||
+ | <source lang='text'> | ||
+ | apt-get install openvswitch-switch openvswitch-common | ||
+ | </source> | ||
+ | |||
+ | Anlegen der Open vSwitch Bridges | ||
+ | <source lang='text'> | ||
+ | ovs-vsctl add-br br-sw01 | ||
+ | ovs-vsctl add-port br-sw01 enp2s0f1 | ||
+ | |||
+ | ovs-vsctl add-br br-sw02 | ||
+ | ovs-vsctl add-port br-sw02 ens1f0 | ||
+ | |||
+ | ovs-vsctl add-br br-sw05 | ||
+ | ovs-vsctl add-port br-sw05 ens1f1 | ||
+ | </source> | ||
+ | |||
+ | /etc/network/interfaces | ||
+ | <source lang='text'> | ||
+ | # The loopback network interface | ||
+ | auto lo | ||
+ | iface lo inet loopback | ||
+ | |||
+ | # The primary network interface | ||
+ | auto br-ffwi | ||
+ | iface br-ffwi inet static | ||
+ | bridge_ports enp2s0f0 | ||
+ | bridge_stp no | ||
+ | bridge_fd 0 | ||
+ | address 10.56.2.139 | ||
+ | netmask 255.255.192.0 | ||
+ | gateway 10.56.0.161 | ||
+ | dns-nameservers 10.56.0.161 10.56.0.23 10.56.0.231 | ||
+ | |||
+ | # Uplink ffmwu-hans-sw01 | ||
+ | auto enp2s0f1 | ||
+ | iface enp2s0f1 inet manual | ||
+ | |||
+ | # Uplink ffmwu-hans-sw02 | ||
+ | auto ens1f0 | ||
+ | iface ens1f0 inet manual | ||
+ | |||
+ | # Uplink ffmwu-hans-sw05 | ||
+ | auto ens1f1 | ||
+ | iface ens1f1 inet manual | ||
+ | |||
+ | # Inter-Bridge Backbone-VM <-> Uplink-VM | ||
+ | auto br-gluonb2b | ||
+ | iface br-gluonb2b inet manual | ||
+ | bridge_ports none | ||
+ | bridge_stp no | ||
+ | bridge_fd 0 | ||
+ | </source> | ||
+ | |||
+ | ====Libvirt Networks==== | ||
+ | Man legt z.B. nach /tmp/ die Netzwerk Definitionen ab. | ||
+ | |||
+ | Datei /tmp/ovs-sw01.xml | ||
+ | <source lang='xml'> | ||
+ | <networkstatus> | ||
+ | <class_id bitmap='0-2'/> | ||
+ | <floor sum='0'/> | ||
+ | <network> | ||
+ | <name>ovs-sw01</name> | ||
+ | <uuid>e5992f9c-4dc1-4f7d-b4e5-6865e80c57f0</uuid> | ||
+ | <forward mode='bridge'/> | ||
+ | <bridge name='br-sw01'/> | ||
+ | <virtualport type='openvswitch'/> | ||
+ | <portgroup name='vlan-all' default='yes'> | ||
+ | <vlan trunk='yes'> | ||
+ | <tag id='4'/> | ||
+ | </vlan> | ||
+ | </portgroup> | ||
+ | </network> | ||
+ | </networkstatus> | ||
+ | </source> | ||
+ | |||
+ | Datei /tmp/ovs-sw02.xml | ||
+ | <source lang='xml'> | ||
+ | <networkstatus> | ||
+ | <class_id bitmap='0-2'/> | ||
+ | <floor sum='0'/> | ||
+ | <network> | ||
+ | <name>ovs-sw02</name> | ||
+ | <uuid>3ceae5b0-cdb4-4996-a0d0-be5f206ed3c2</uuid> | ||
+ | <forward mode='bridge'/> | ||
+ | <bridge name='br-sw02'/> | ||
+ | <virtualport type='openvswitch'/> | ||
+ | <portgroup name='vlan-all' default='yes'> | ||
+ | <vlan trunk='yes'> | ||
+ | <tag id='5'/> | ||
+ | <tag id='301'/> | ||
+ | <tag id='303'/> | ||
+ | <tag id='317'/> | ||
+ | <tag id='318'/> | ||
+ | <tag id='319'/> | ||
+ | <tag id='320'/> | ||
+ | <tag id='321'/> | ||
+ | <tag id='322'/> | ||
+ | </vlan> | ||
+ | </portgroup> | ||
+ | </network> | ||
+ | </networkstatus> | ||
+ | </source> | ||
+ | |||
+ | Datei /tmp/ovs-sw05.xml | ||
+ | <source lang='xml'> | ||
+ | <networkstatus> | ||
+ | <class_id bitmap='0-2'/> | ||
+ | <floor sum='0'/> | ||
+ | <network> | ||
+ | <name>ovs-sw05</name> | ||
+ | <uuid>c22babeb-8513-4b83-b4eb-ea9252500477</uuid> | ||
+ | <forward mode='bridge'/> | ||
+ | <bridge name='br-sw05'/> | ||
+ | <virtualport type='openvswitch'/> | ||
+ | <portgroup name='vlan-all' default='yes'> | ||
+ | <vlan trunk='yes'> | ||
+ | <tag id='5'/> | ||
+ | <tag id='513'/> | ||
+ | <tag id='514'/> | ||
+ | <tag id='515'/> | ||
+ | <tag id='516'/> | ||
+ | <tag id='517'/> | ||
+ | <tag id='518'/> | ||
+ | </vlan> | ||
+ | </portgroup> | ||
+ | <portgroup name='vlan-6'> | ||
+ | <vlan> | ||
+ | <tag id='6'/> | ||
+ | </vlan> | ||
+ | </network> | ||
+ | </networkstatus> | ||
+ | </source> | ||
+ | |||
+ | Netzwerk-Definitionen einlesen, starten und für den Autostart markieren. | ||
+ | <source lang='text'> | ||
+ | virsh net-define /tmp/ovs-sw01.xml | ||
+ | virsh net-define /tmp/ovs-sw02.xml | ||
+ | virsh net-define /tmp/ovs-sw05.xml | ||
+ | |||
+ | virsh net-start ovs-sw01 | ||
+ | virsh net-start ovs-sw02 | ||
+ | virsh net-start ovs-sw05 | ||
+ | |||
+ | virsh net-autostart ovs-sw01 | ||
+ | virsh net-autostart ovs-sw02 | ||
+ | virsh net-autostart ovs-sw05 | ||
+ | </source> | ||
+ | |||
+ | ====Libvirt Domain Configs==== | ||
+ | Per default werden die Namen für virtuelle Netzwerkkarten der VMs auf dem Host dynamisch nach dem Schema vnetX vergeben. | ||
+ | Für die OpenvSwitch Konfiguration benötigen wir aber persistente Interface-Namen. Diese werden in den <target dev=''/> Direktiven gesetzt. | ||
+ | |||
+ | ffmwu-hans-core | ||
+ | <source lang='xml'> | ||
+ | <domain type='kvm' id='1'> | ||
+ | <name>ffmwu-hans-core</name> | ||
+ | <uuid>04502792-af13-41de-9073-a777ec8eea80</uuid> | ||
+ | <memory unit='KiB'>524288</memory> | ||
+ | <currentMemory unit='KiB'>524288</currentMemory> | ||
+ | <vcpu placement='static'>1</vcpu> | ||
+ | <resource> | ||
+ | <partition>/machine</partition> | ||
+ | </resource> | ||
+ | <os> | ||
+ | <type arch='x86_64' machine='pc-i440fx-wily'>hvm</type> | ||
+ | <boot dev='hd'/> | ||
+ | </os> | ||
+ | <features> | ||
+ | <acpi/> | ||
+ | <apic/> | ||
+ | <vmport state='off'/> | ||
+ | </features> | ||
+ | <cpu mode='host-model'> | ||
+ | <model fallback='allow'/> | ||
+ | </cpu> | ||
+ | <clock offset='utc'> | ||
+ | <timer name='rtc' tickpolicy='catchup'/> | ||
+ | <timer name='pit' tickpolicy='delay'/> | ||
+ | <timer name='hpet' present='no'/> | ||
+ | </clock> | ||
+ | <on_poweroff>destroy</on_poweroff> | ||
+ | <on_reboot>restart</on_reboot> | ||
+ | <on_crash>restart</on_crash> | ||
+ | <pm> | ||
+ | <suspend-to-mem enabled='no'/> | ||
+ | <suspend-to-disk enabled='no'/> | ||
+ | </pm> | ||
+ | <devices> | ||
+ | <emulator>/usr/bin/kvm-spice</emulator> | ||
+ | <disk type='file' device='disk'> | ||
+ | <driver name='qemu' type='raw'/> | ||
+ | <source file='/var/lib/libvirt/images/ffmwu-hans-core.img'/> | ||
+ | <backingStore/> | ||
+ | <target dev='vda' bus='virtio'/> | ||
+ | <alias name='virtio-disk0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> | ||
+ | </disk> | ||
+ | <controller type='usb' index='0' model='ich9-ehci1'> | ||
+ | <alias name='usb'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> | ||
+ | </controller> | ||
+ | <controller type='usb' index='0' model='ich9-uhci1'> | ||
+ | <alias name='usb'/> | ||
+ | <master startport='0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> | ||
+ | </controller> | ||
+ | <controller type='usb' index='0' model='ich9-uhci2'> | ||
+ | <alias name='usb'/> | ||
+ | <master startport='2'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> | ||
+ | </controller> | ||
+ | <controller type='usb' index='0' model='ich9-uhci3'> | ||
+ | <alias name='usb'/> | ||
+ | <master startport='4'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> | ||
+ | </controller> | ||
+ | <controller type='pci' index='0' model='pci-root'> | ||
+ | <alias name='pci.0'/> | ||
+ | </controller> | ||
+ | <controller type='virtio-serial' index='0'> | ||
+ | <alias name='virtio-serial0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> | ||
+ | </controller> | ||
+ | <interface type='bridge'> | ||
+ | <mac address='52:54:00:93:ba:bb'/> | ||
+ | <source network='ovs-sw05' portgroup='vlan-all' bridge='br-sw05'/> | ||
+ | <vlan trunk='yes'> | ||
+ | <tag id='5'/> | ||
+ | <tag id='513'/> | ||
+ | <tag id='514'/> | ||
+ | <tag id='515'/> | ||
+ | <tag id='516'/> | ||
+ | <tag id='517'/> | ||
+ | <tag id='518'/> | ||
+ | </vlan> | ||
+ | <virtualport type='openvswitch'> | ||
+ | <parameters interfaceid='55521f0b-3c6e-4855-8fb2-7fa265da3ac2'/> | ||
+ | </virtualport> | ||
+ | <target dev='vcoresw05'/> | ||
+ | <model type='virtio'/> | ||
+ | <alias name='net0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/> | ||
+ | </interface> | ||
+ | <interface type='bridge'> | ||
+ | <mac address='52:54:00:f7:8b:a8'/> | ||
+ | <source bridge='br-gluonb2b'/> | ||
+ | <target dev='vcoreb2b'/> | ||
+ | <model type='virtio'/> | ||
+ | <alias name='net1'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x0c' function='0x0'/> | ||
+ | </interface> | ||
+ | <interface type='bridge'> | ||
+ | <mac address='52:54:00:3c:50:59'/> | ||
+ | <source network='ovs-sw02' portgroup='vlan-all' bridge='br-sw02'/> | ||
+ | <vlan trunk='yes'> | ||
+ | <tag id='5'/> | ||
+ | <tag id='301'/> | ||
+ | <tag id='303'/> | ||
+ | <tag id='317'/> | ||
+ | <tag id='318'/> | ||
+ | <tag id='319'/> | ||
+ | <tag id='320'/> | ||
+ | <tag id='321'/> | ||
+ | <tag id='322'/> | ||
+ | </vlan> | ||
+ | <virtualport type='openvswitch'> | ||
+ | <parameters interfaceid='959931f7-7eb8-46a9-9c8b-c100e4c9fea8'/> | ||
+ | </virtualport> | ||
+ | <target dev='vcoresw02'/> | ||
+ | <model type='virtio'/> | ||
+ | <alias name='net2'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> | ||
+ | </interface> | ||
+ | <serial type='pty'> | ||
+ | <source path='/dev/pts/0'/> | ||
+ | <target port='0'/> | ||
+ | <alias name='serial0'/> | ||
+ | </serial> | ||
+ | <console type='pty' tty='/dev/pts/0'> | ||
+ | <source path='/dev/pts/0'/> | ||
+ | <target type='serial' port='0'/> | ||
+ | <alias name='serial0'/> | ||
+ | </console> | ||
+ | <channel type='spicevmc'> | ||
+ | <target type='virtio' name='com.redhat.spice.0' state='disconnected'/> | ||
+ | <alias name='channel0'/> | ||
+ | <address type='virtio-serial' controller='0' bus='0' port='1'/> | ||
+ | </channel> | ||
+ | <input type='mouse' bus='ps2'/> | ||
+ | <input type='keyboard' bus='ps2'/> | ||
+ | <graphics type='spice' port='5900' autoport='yes' listen='127.0.0.1'> | ||
+ | <listen type='address' address='127.0.0.1' fromConfig='1'/> | ||
+ | </graphics> | ||
+ | <sound model='ich6'> | ||
+ | <alias name='sound0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> | ||
+ | </sound> | ||
+ | <video> | ||
+ | <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1'/> | ||
+ | <alias name='video0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> | ||
+ | </video> | ||
+ | <redirdev bus='usb' type='spicevmc'> | ||
+ | <alias name='redir0'/> | ||
+ | </redirdev> | ||
+ | <redirdev bus='usb' type='spicevmc'> | ||
+ | <alias name='redir1'/> | ||
+ | </redirdev> | ||
+ | <watchdog model='i6300esb' action='reset'> | ||
+ | <alias name='watchdog0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/> | ||
+ | </watchdog> | ||
+ | <memballoon model='virtio'> | ||
+ | <alias name='balloon0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> | ||
+ | </memballoon> | ||
+ | </devices> | ||
+ | <seclabel type='dynamic' model='apparmor' relabel='yes'> | ||
+ | <label>libvirt-04502792-af13-41de-9073-a777ec8eea80</label> | ||
+ | <imagelabel>libvirt-04502792-af13-41de-9073-a777ec8eea80</imagelabel> | ||
+ | </seclabel> | ||
+ | </domain> | ||
+ | </source> | ||
+ | |||
+ | ffmwu-hans-uplink | ||
+ | <source lang='xml'> | ||
+ | <domain type='kvm' id='15'> | ||
+ | <name>ffmwu-hans-uplink</name> | ||
+ | <uuid>d768984d-d16e-400d-9a22-273f45bd9ab2</uuid> | ||
+ | <memory unit='KiB'>524288</memory> | ||
+ | <currentMemory unit='KiB'>524288</currentMemory> | ||
+ | <vcpu placement='static'>1</vcpu> | ||
+ | <resource> | ||
+ | <partition>/machine</partition> | ||
+ | </resource> | ||
+ | <os> | ||
+ | <type arch='x86_64' machine='pc-i440fx-wily'>hvm</type> | ||
+ | <boot dev='hd'/> | ||
+ | </os> | ||
+ | <features> | ||
+ | <acpi/> | ||
+ | <apic/> | ||
+ | <vmport state='off'/> | ||
+ | </features> | ||
+ | <cpu mode='custom' match='exact'> | ||
+ | <model fallback='allow'>Nehalem</model> | ||
+ | </cpu> | ||
+ | <clock offset='utc'> | ||
+ | <timer name='rtc' tickpolicy='catchup'/> | ||
+ | <timer name='pit' tickpolicy='delay'/> | ||
+ | <timer name='hpet' present='no'/> | ||
+ | </clock> | ||
+ | <on_poweroff>destroy</on_poweroff> | ||
+ | <on_reboot>restart</on_reboot> | ||
+ | <on_crash>restart</on_crash> | ||
+ | <pm> | ||
+ | <suspend-to-mem enabled='no'/> | ||
+ | <suspend-to-disk enabled='no'/> | ||
+ | </pm> | ||
+ | <devices> | ||
+ | <emulator>/usr/bin/kvm-spice</emulator> | ||
+ | <disk type='file' device='disk'> | ||
+ | <driver name='qemu' type='raw'/> | ||
+ | <source file='/var/lib/libvirt/images/ffmwu-hans-uplink.img'/> | ||
+ | <backingStore/> | ||
+ | <target dev='vda' bus='virtio'/> | ||
+ | <alias name='virtio-disk0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/> | ||
+ | </disk> | ||
+ | <controller type='usb' index='0' model='ich9-ehci1'> | ||
+ | <alias name='usb'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> | ||
+ | </controller> | ||
+ | <controller type='usb' index='0' model='ich9-uhci1'> | ||
+ | <alias name='usb'/> | ||
+ | <master startport='0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> | ||
+ | </controller> | ||
+ | <controller type='usb' index='0' model='ich9-uhci2'> | ||
+ | <alias name='usb'/> | ||
+ | <master startport='2'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> | ||
+ | </controller> | ||
+ | <controller type='usb' index='0' model='ich9-uhci3'> | ||
+ | <alias name='usb'/> | ||
+ | <master startport='4'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> | ||
+ | </controller> | ||
+ | <controller type='pci' index='0' model='pci-root'> | ||
+ | <alias name='pci.0'/> | ||
+ | </controller> | ||
+ | <controller type='virtio-serial' index='0'> | ||
+ | <alias name='virtio-serial0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> | ||
+ | </controller> | ||
+ | <controller type='ide' index='0'> | ||
+ | <alias name='ide'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> | ||
+ | </controller> | ||
+ | <controller type='scsi' index='0'> | ||
+ | <alias name='scsi0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> | ||
+ | </controller> | ||
+ | <interface type='bridge'> | ||
+ | <mac address='52:54:00:fd:c1:33'/> | ||
+ | <source network='ovs-sw05' portgroup='vlan-6' bridge='br-sw05'/> | ||
+ | <vlan> | ||
+ | <tag id='6'/> | ||
+ | </vlan> | ||
+ | <virtualport type='openvswitch'> | ||
+ | <parameters interfaceid='789cf088-db1a-47a5-9cc9-334d1366546d'/> | ||
+ | </virtualport> | ||
+ | <target dev='vuplsw05'/> | ||
+ | <model type='virtio'/> | ||
+ | <alias name='net0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> | ||
+ | </interface> | ||
+ | <interface type='bridge'> | ||
+ | <mac address='52:54:00:f5:1e:09'/> | ||
+ | <source bridge='br-gluonb2b'/> | ||
+ | <target dev='vuplb2b'/> | ||
+ | <model type='virtio'/> | ||
+ | <alias name='net1'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> | ||
+ | </interface> | ||
+ | <interface type='bridge'> | ||
+ | <mac address='52:54:00:e7:71:af'/> | ||
+ | <source network='ovs-sw01' portgroup='vlan-all' bridge='br-sw01'/> | ||
+ | <vlan trunk='yes'> | ||
+ | <tag id='4'/> | ||
+ | </vlan> | ||
+ | <virtualport type='openvswitch'> | ||
+ | <parameters interfaceid='5d824f23-d60c-443f-9c00-429f0bdd7943'/> | ||
+ | </virtualport> | ||
+ | <target dev='vuplsw01'/> | ||
+ | <model type='virtio'/> | ||
+ | <alias name='net2'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/> | ||
+ | </interface> | ||
+ | <serial type='pty'> | ||
+ | <source path='/dev/pts/2'/> | ||
+ | <target port='0'/> | ||
+ | <alias name='serial0'/> | ||
+ | </serial> | ||
+ | <console type='pty' tty='/dev/pts/2'> | ||
+ | <source path='/dev/pts/2'/> | ||
+ | <target type='serial' port='0'/> | ||
+ | <alias name='serial0'/> | ||
+ | </console> | ||
+ | <channel type='spicevmc'> | ||
+ | <target type='virtio' name='com.redhat.spice.0' state='disconnected'/> | ||
+ | <alias name='channel0'/> | ||
+ | <address type='virtio-serial' controller='0' bus='0' port='1'/> | ||
+ | </channel> | ||
+ | <input type='tablet' bus='usb'> | ||
+ | <alias name='input0'/> | ||
+ | </input> | ||
+ | <input type='mouse' bus='ps2'/> | ||
+ | <input type='keyboard' bus='ps2'/> | ||
+ | <graphics type='spice' port='5901' autoport='yes' listen='127.0.0.1'> | ||
+ | <listen type='address' address='127.0.0.1' fromConfig='1'/> | ||
+ | </graphics> | ||
+ | <sound model='ich6'> | ||
+ | <alias name='sound0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> | ||
+ | </sound> | ||
+ | <video> | ||
+ | <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1'/> | ||
+ | <alias name='video0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> | ||
+ | </video> | ||
+ | <redirdev bus='usb' type='spicevmc'> | ||
+ | <alias name='redir0'/> | ||
+ | </redirdev> | ||
+ | <redirdev bus='usb' type='spicevmc'> | ||
+ | <alias name='redir1'/> | ||
+ | </redirdev> | ||
+ | <memballoon model='virtio'> | ||
+ | <alias name='balloon0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> | ||
+ | </memballoon> | ||
+ | </devices> | ||
+ | <seclabel type='dynamic' model='apparmor' relabel='yes'> | ||
+ | <label>libvirt-d768984d-d16e-400d-9a22-273f45bd9ab2</label> | ||
+ | <imagelabel>libvirt-d768984d-d16e-400d-9a22-273f45bd9ab2</imagelabel> | ||
+ | </seclabel> | ||
+ | </domain> | ||
+ | </source> | ||
+ | |||
+ | ====Open vSwitch Konfiguration==== | ||
+ | Die Konfiguration der Open vSwitch Switche sieht dann wie folgt aus: | ||
+ | <source lang='text'> | ||
+ | root@HanS-Server:~# ovs-vsctl show | ||
+ | cd407941-c84e-484c-9b7c-426050da8e74 | ||
+ | Bridge "br-sw05" | ||
+ | Port "vcoresw05" | ||
+ | trunks: [5, 513, 514, 515, 516, 517, 518] | ||
+ | Interface "vcoresw05" | ||
+ | Port "ens1f1" | ||
+ | Interface "ens1f1" | ||
+ | Port "vuplsw05" | ||
+ | tag: 6 | ||
+ | Interface "vuplsw05" | ||
+ | Port "br-sw05" | ||
+ | Interface "br-sw05" | ||
+ | type: internal | ||
+ | Bridge "br-sw02" | ||
+ | Port "br-sw02" | ||
+ | Interface "br-sw02" | ||
+ | type: internal | ||
+ | Port "vcoresw02" | ||
+ | trunks: [5, 301, 303, 317, 318, 319, 320, 321, 322] | ||
+ | Interface "vcoresw02" | ||
+ | Port "ens1f0" | ||
+ | Interface "ens1f0" | ||
+ | Bridge "br-sw01" | ||
+ | Port "vuplsw01" | ||
+ | trunks: [4] | ||
+ | Interface "vuplsw01" | ||
+ | Port "br-sw01" | ||
+ | Interface "br-sw01" | ||
+ | type: internal | ||
+ | Port "enp2s0f1" | ||
+ | Interface "enp2s0f1" | ||
+ | ovs_version: "2.5.0" | ||
+ | |||
+ | root@HanS-Server:~# ovs-vsctl list-br | ||
+ | br-sw01 | ||
+ | br-sw02 | ||
+ | br-sw05 | ||
+ | |||
+ | root@HanS-Server:~# ovs-vsctl list-ifaces br-sw01 | ||
+ | enp2s0f1 | ||
+ | vuplsw01 | ||
+ | |||
+ | root@HanS-Server:~# ovs-vsctl list-ifaces br-sw02 | ||
+ | ens1f0 | ||
+ | vcoresw02 | ||
+ | |||
+ | root@HanS-Server:~# ovs-vsctl list-ifaces br-sw05 | ||
+ | ens1f1 | ||
+ | vcoresw05 | ||
+ | vuplsw05 | ||
+ | </source> | ||
+ | |||
+ | ====VM-Watchdog-Script==== | ||
+ | Wenn die VM unerwartet crasht, kann diese per Remote nicht resettet werden. | ||
+ | Dies machen wir automatisiert mit diesem Script, das in /usr/local/bin liegt. | ||
+ | <source lang='bash'> | ||
+ | #!/bin/bash | ||
+ | |||
+ | count=$( ping6 -c 5 fd56:b4dc:4b1e:0:5054:ff:fedd:cc9d | grep "bytes from" | wc -l ) | ||
+ | if [ $count -eq 0 ] | ||
+ | then | ||
+ | logger "ffmwu-hans-core: Not available -> Reset VM" | ||
+ | virsh reset ffmwu-hans-core || virsh start ffmwu-hans-core | ||
+ | exit 0 | ||
+ | else | ||
+ | logger "ffmwu-hans-core: Up and running -> nothing to do" | ||
+ | exit 0 | ||
+ | fi | ||
+ | </source> | ||
+ | |||
+ | <source lang='bash'> | ||
+ | #!/bin/bash | ||
+ | |||
+ | count=$( ping6 -c 5 fd56:b4dc:4b1e:0:5054:ff:fe1c:8661 | grep "bytes from" | wc -l ) | ||
+ | if [ $count -eq 0 ] | ||
+ | then | ||
+ | logger "ffmwu-hans-core: Not available -> Reset VM" | ||
+ | virsh reset ffmwu-hans-core || virsh start ffmwu-hans-core | ||
+ | exit 0 | ||
+ | else | ||
+ | logger "ffmwu-hans-core: Up and running -> nothing to do" | ||
+ | exit 0 | ||
+ | fi | ||
+ | </source> | ||
+ | |||
+ | Per cronjob wird es alle 20 Minuten ausgeführt | ||
+ | <source lang='text'> | ||
+ | # m h dom mon dow command | ||
+ | */20 * * * * /usr/local/bin/ffmwu-hans-core.sh | ||
+ | */20 * * * * /usr/local/bin/ffmwu-hans-uplink.sh | ||
+ | </source> | ||
+ | |||
===Uplink=== | ===Uplink=== | ||
* via Richtfunk | * via Richtfunk | ||
+ | * 16.000 DSL Telekom | ||
+ | |||
+ | ==Dokumente== | ||
+ | ===Flucht- & Rettungspläne=== | ||
+ | <gallery mode="packed-hover"> | ||
+ | Image:Hbs-f%2Br-eg.jpg|Erdgeschoss | ||
+ | Image:Hbs-f%2Br-1og.jpg|1. Obergeschoss | ||
+ | Image:Hbs-f%2Br-2og.jpg|2. Obergeschoss | ||
+ | Image:Hbs-f%2Br-3og.jpg|3. Obergeschoss | ||
+ | Image:Hbs-f%2Br-4og.jpg|4. Obergeschoss | ||
+ | Image:Hbs-f%2Br-5og.jpg|5. Obergeschoss | ||
+ | Image:Hbs-f%2Br-6og.jpg|6. Obergeschoss | ||
+ | Image:Hbs-f%2Br-7og.jpg|7. Obergeschoss | ||
+ | Image:Hbs-f%2Br-8og.jpg|8. Obergeschoss | ||
+ | </gallery> | ||
+ | ==Planung== | ||
===geplante Technik=== | ===geplante Technik=== | ||
* Hardwareplanung für das Projekt vom 03.03.2016 | * Hardwareplanung für das Projekt vom 03.03.2016 | ||
Zeile 859: | Zeile 2.049: | ||
| jacob | | jacob | ||
|- | |- | ||
− | | [http:// | + | | [http://direkt.jacob-computer.de/Stromversorgung/USV-Systeme/APC-SMT1000RMi2U-SMT1000RMI2U-SMT1000RMI2U-artnr-1074764.html APC Smart-UPS 1000VA LCD RM 2U 230V] |
| style="text-align:right" | 2 | | style="text-align:right" | 2 | ||
− | | style="text-align:right" | | + | | style="text-align:right" | 466,60 € |
− | | style="text-align:right" | | + | | style="text-align:right" | 933,20 € |
| USV für 5 Switche + Server | | USV für 5 Switche + Server | ||
− | | | + | | jacob |
+ | |- | ||
+ | | [http://direkt.jacob-computer.de/logilink-48-30cm-19-steckdosenleiste-8-fach-mit-artnr-1954306.html LogiLink 19" Steckdosenleiste, 8-fach mit Schalter] | ||
+ | | style="text-align:right" | 2 | ||
+ | | style="text-align:right" | 22,50 € | ||
+ | | style="text-align:right" | 45,00 € | ||
+ | | Steckdosenleiste für Serverschrank | ||
+ | | jacob | ||
|- | |- | ||
| [https://www.servershop24.de/hp-proliant-dl380-g5-2x-xeon-e5450-qc-3-0-ghz-8-gb-ram-2x-146-gb-sas-10k/a-106729/ HP ProLiant DL380 G5 2x Xeon E5450] | | [https://www.servershop24.de/hp-proliant-dl380-g5-2x-xeon-e5450-qc-3-0-ghz-8-gb-ram-2x-146-gb-sas-10k/a-106729/ HP ProLiant DL380 G5 2x Xeon E5450] | ||
Zeile 874: | Zeile 2.071: | ||
|- | |- | ||
| [https://www.servershop24.de/komponenten/netzwerkkarten/10-100-1000-rj45/hp-nc364t-pci-e-quad-port-gigabit-netzwerkkarte-436431-001/a-103696/ HP NC364T Quad Port Gigabit Server Adapter] | | [https://www.servershop24.de/komponenten/netzwerkkarten/10-100-1000-rj45/hp-nc364t-pci-e-quad-port-gigabit-netzwerkkarte-436431-001/a-103696/ HP NC364T Quad Port Gigabit Server Adapter] | ||
− | | style="text-align:right" | | + | | style="text-align:right" | 2 |
− | |||
| style="text-align:right" | 49,99 € | | style="text-align:right" | 49,99 € | ||
+ | | style="text-align:right" | 99,98 € | ||
| 4x Port RJ45 Netzwerkkarte | | 4x Port RJ45 Netzwerkkarte | ||
+ | | servershop24 | ||
+ | |- | ||
+ | | [https://www.servershop24.de/komponenten/19-schienen/hp/hp-dl380-g4-g5-dl385-19-rackmount-schienen-364676-001/a-100580/ HP 19" Rackmount-Schienen] | ||
+ | | style="text-align:right" | 1 | ||
+ | | style="text-align:right" | 7,99 € | ||
+ | | style="text-align:right" | 7,99 € | ||
+ | | 19" Rackmount-Schienen für Server | ||
| servershop24 | | servershop24 | ||
|- | |- | ||
Zeile 888: | Zeile 2.092: | ||
|- | |- | ||
| [http://www.voelkner.de/products/138671/Patchkabel-Cat6-S-Ftp-Blau-1m-Bulk.html Patchkabel] | | [http://www.voelkner.de/products/138671/Patchkabel-Cat6-S-Ftp-Blau-1m-Bulk.html Patchkabel] | ||
− | | style="text-align:right" | | + | | style="text-align:right" | 200 |
| style="text-align:right" | 1,99 € | | style="text-align:right" | 1,99 € | ||
− | | style="text-align:right" | | + | | style="text-align:right" | 398,00 € |
| Patchkabel für TP-Link CPE210 | | Patchkabel für TP-Link CPE210 | ||
| Völkner | | Völkner | ||
Zeile 902: | Zeile 2.106: | ||
|- | |- | ||
!colspan="3" |Zwischensumme | !colspan="3" |Zwischensumme | ||
− | | style="text-align:right" | | + | | style="text-align:right" | 6108,15 € |
|colspan="2" | | |colspan="2" | | ||
|- | |- | ||
Zeile 930: | Zeile 2.134: | ||
!colspan="3" |Zwischensumme | !colspan="3" |Zwischensumme | ||
| style="text-align:right" | 602,62 € | | style="text-align:right" | 602,62 € | ||
+ | |colspan="2" | | ||
+ | |- | ||
+ | !colspan="6" | Aufenthaltsraum | ||
+ | |- | ||
+ | | [http://www.voelkner.de/products/754642/TP-LINK-PoE-WLAN-Outdoor-Access-Point-300-MBit-s-2.4-GHz-CPE210.html TP-Link CPE210] | ||
+ | | style="text-align:right" | 4 | ||
+ | | style="text-align:right" | 59,90 € | ||
+ | | style="text-align:right" | 239,60 € | ||
+ | | Client AP | ||
+ | | Völkner | ||
+ | |- | ||
+ | | [http://varia-store.com/Zubehoer/Befestigungen/Wandhalterung-25cm-L-x-25cm-H::1041.html Wandhalterung - 25cm (L) x 25cm (H)] | ||
+ | | style="text-align:right" | 4 | ||
+ | | style="text-align:right" | 5,49 € | ||
+ | | style="text-align:right" | 21,96 € | ||
+ | | Halterung für TP-Link CPE210 | ||
+ | | varia-store | ||
+ | |- | ||
+ | !colspan="3" |Zwischensumme | ||
+ | | style="text-align:right" | 261,56 € | ||
|colspan="2" | | |colspan="2" | | ||
|- | |- | ||
!colspan="6" | Dach | !colspan="6" | Dach | ||
+ | |- | ||
+ | | [http://direkt.jacob-computer.de/Netzwerk/WLAN-Antennen/Ubiquiti-NanoBeam-M5AC-NBE-5AC-19-artnr-2263242.html NBE-5AC-19] | ||
+ | | style="text-align:right" | 4 | ||
+ | | style="text-align:right" | 99,20 € | ||
+ | | style="text-align:right" | 396,80 € | ||
+ | | Backbone | ||
+ | | jacob | ||
+ | |- | ||
+ | | [http://direkt.jacob-computer.de/ubiquiti-powerbeam-ac-pbe-5ac-400-artnr-2610571.html PBE-5AC-400] | ||
+ | | style="text-align:right" | 4 | ||
+ | | style="text-align:right" | 109,40 € | ||
+ | | style="text-align:right" | 437,60 € | ||
+ | | Backbone | ||
+ | | jacob | ||
+ | |- | ||
+ | | [http://direkt.jacob-computer.de/ubiquiti-5-ghz-lbe-5ac-16-120-artnr-2562077.html LBE-5AC-16-120] | ||
+ | | style="text-align:right" | 1 | ||
+ | | style="text-align:right" | 89,90 € | ||
+ | | style="text-align:right" | 89,90 € | ||
+ | | Backbone | ||
+ | | jacob | ||
|- | |- | ||
!colspan="3" |Zwischensumme | !colspan="3" |Zwischensumme | ||
− | | style="text-align:right" | | + | | style="text-align:right" | 924,30 € |
!colspan="2" | | !colspan="2" | | ||
|- | |- | ||
!colspan="3" |Gesamtsumme | !colspan="3" |Gesamtsumme | ||
− | | style="text-align:right" | | + | | style="text-align:right" | 7896,63 € |
!colspan="2" | | !colspan="2" | | ||
|} | |} | ||
+ | |||
+ | {{Category Add|Wiesbaden}} |
Aktuelle Version vom 26. November 2016, 22:48 Uhr
Allgemeines
Name | Hans-Bredow-Straße |
Thema | Versorgung des ehemaligen Gerling Verwaltungssitzes in Wiesbaden-Südost, Hans-Bredow-Straße 2 mit Freifunk. Dort sind bis zu 600 Geflüchtete untergebracht. |
Verantwortlicher | GÜ-NN1 |
Mitglieder | Axel, Benito, GÜ-NN1, Peter, Volker, Kokel |
Planungs-Mailing-Liste | Hans |
Berichtsturnus | auf ML |
Beginn | 2016-02-02 |
Ende | ? |
Ergebnisse |
aktueller Stand
- 2016-11-22 | 01 Pers. X 01 h | Server neustarten, 1x WR1043ND installiert
- 2016-11-15 | 01 Pers. X 02 h | Server neustarten, 2x CPEs + 1x 841er konfiguriert
- 2016-11-11 | 01 Pers. X 01 h | Server neustarten, Gespraeche, Router umstecken
- 2016-10-10 | 01 Pers. X 02 h | Wartung; Config-Reset einer CPE; Umpatchung einer CPE
- 2016-09-11 | 01 Pers. X 02 h | Inbetriebnahme Switche 1-3/Technikraum EG; Ausrichtung PBE-5AC-400 in Richtung Opelbad; Einweisung Hausmeister umpatchen CPEs
- 2016-08-25 | 02 Pers. X 02 h | Ausrichtung NB5-AC zu Weilstraße
- 2016-08-12 | 01 Pers. X 01 h | Telekomrouter konfiguriert
- 2016-07-10 | 02 Pers. X 04 h | 4 Kabel gecrimpt, Server + Gluon-VM konfiguriert
- 2016-07-06 | 02 Pers. X 03 h | 2 Kabel gecrimpt, 2 Switche konfiguriert, 2 PBE-5AC-400 ausgerichtet + konfiguriert
- 2016-05-15 | 01 Pers. X 05 h | Switche/USV in Schrank montiert
- 2016-05-14 | 02 Pers. X 08 h | Installation vom Server, Switche/USV in Schrank montiert
- 2016-05-11 | 02 Pers. X 02 h | Einlagerung der bestellten Hardware zur Weiternutzung
- 2016-03-03 | 04 Pers. X 03 h | Ausmessung eines Stockwerkes und Bedarfsfestlegung (Bestellung Hardware)
- 2016-02-02 | 03 Pers. X 01 h | Vor-Ort-Termin
Lokationsbeschreibung
HBS hat 8 Stockwerke, ein längliches Gebäude, wo vom mittigen Flur rechts und links die Zimmer abgehen. Außerdem gibt es einen zweistöckigen Anbau, der im rechten Winkel am achtstöckigen Teil angebaut ist. Dort im UG ist die Kantine / Aufenthaltsraum.
Befreifunkt sollen alle 8 Stockwerke, die 2 Stockwerke des Anbaus und der Aufenthaltbereich.
Bing-Standort: http://binged.it/1QbZhTd
Vom Dach hat man einen guten Rundumblick auf viele Standorte in der Stadt und bis nach Mainz. Fotos: http://photos.wiesbaden.freifunk.net/index.php?/category/30
Das 2., 3. und 4. OG soll am 15.2. in Betrieb gehen, der Rest später. Belegung werden 500 - 600 Personen sein.
An einen zentralen Punkt im Haus käme ein PoE-fähiger Switch. Von dort bekommen wir LAN an die nötigen Routerplätze gelegt. Auf das Dach wird ebenfalls LAN gelegt, zwecks Anbindung BB.--Axel (Diskussion) 22:42, 3. Feb. 2016 (CET)
Technik
Folgende Richtlinien sollen gelten:
- VLAN 5 = Freifunk Client Netz
- VLANs 100-121/201-222/301-316/401-422/501-512 = Untagged VLANs für CPE210/TL-WR841N
- VLANs 11-22 = Tagged VLANs für Richtfunk
- CPE210 = Mesh-On-LAN/-WAN aktiviert
- TL-WR841N = Mesh-On-LAN/-WAN/-WiFi aktiviert
Port-Legende: "X YZ YZ .. "
X: Port-Bezeichnung (Gerät, nicht Software intern)
Y: VLAN-ID
Z: U = Untagged, T = Tagged
WLAN-Legende: "CX/MX"
C: Client-WLAN
M: Mesh-WLAN
X: 0 = deaktiviert; >0 = WLAN-Kanal (+ aktiviert)
End-Geräte Knoten
Client-WLAN sind alle auf 2,4GHz eingestellt
Lfd. Nr. | Knotenname | Standort | Routertyp | Firmware | 2,4GHz | IPv4 | Kommentar | In Betrieb |
---|---|---|---|---|---|---|---|---|
01. | HanS-EG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.1 | nein | ||
02. | HanS-EG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.2 | nein | ||
03. | HanS-EG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.3 | ja | ||
04. | HanS-EG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.4 | ja | ||
05. | HanS-1.OG-1 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.5 | ja | ||
06. | HanS-1.OG-2 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.6 | ja | ||
07. | HanS-1.OG-3 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.7 | ja | ||
08. | HanS-1.OG-4 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.8 | ja | ||
09. | HanS-2.OG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.9 | ja | ||
10. | HanS-2.OG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.10 | nein | ||
11. | HanS-2.OG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.11 | nein | ||
12. | HanS-2.OG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.12 | nein | ||
13. | HanS-3.OG-1 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.13 | ja | ||
14. | HanS-3.OG-2 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.14 | nein | ||
15. | HanS-3.OG-3 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.15 | ja | ||
16. | HanS-3.OG-4 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.16 | ja | ||
17. | HanS-4.OG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.17 | nein | ||
18. | HanS-4.OG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.18 | ja | ||
19. | HanS-4.OG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.19 | ja | ||
20. | HanS-4.OG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.20 | ja | ||
21. | HanS-5.OG-1 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.21 | ja | ||
22. | HanS-5.OG-2 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.22 | ja | ||
23. | HanS-5.OG-3 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.23 | nein | ||
24. | HanS-5.OG-4 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.24 | ja | ||
25. | HanS-6.OG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.25 | ja | ||
26. | HanS-6.OG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.26 | ja | ||
27. | HanS-6.OG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.27 | ja | ||
28. | HanS-6.OG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.28 | nein | ||
29. | HanS-7.OG-1 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.29 | ja | ||
30. | HanS-7.OG-2 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.30 | nein | ||
31. | HanS-7.OG-3 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.31 | ja | ||
32. | HanS-7.OG-4 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.32 | nein | ||
33. | HanS-8.OG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.33 | nein | ||
34. | HanS-8.OG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.34 | ja | ||
35. | HanS-8.OG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.35 | ja | ||
36. | HanS-8.OG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.36 | ja | ||
37. | HanS-Flur-EG-1 | CPE210 v1.1 | Gluon | C01/M01 | Mesh mit HanS-Flur-EG-1.1 | ja | ||
38. | HanS-Flur-EG-1.1 | TL-WR841N | Gluon | C01/M01 | Mesh mit HanS-Flur-EG-1 | nein | ||
39. | HanS-Flur-EG-2 | CPE210 v1.1 | Gluon | C05/M05 | Mesh mit HanS-Flur-EG-2.1 | ja | ||
40. | HanS-Flur-EG-2.1 | TL-WR841N | Gluon | C05/M05 | Mesh mit HanS-Flur-EG-2 | nein | ||
41. | HanS-Flur-1.OG-1 | CPE210 v1.1 | Gluon | C09/M09 | Mesh mit HanS-Flur-1.OG-1.1 | nein | ||
42. | HanS-Flur-1.OG-1.1 | TL-WR841N | Gluon | C09/M09 | Mesh mit HanS-Flur-1.OG-1 | nein | ||
43. | HanS-Flur-1.OG-2 | CPE210 v1.1 | Gluon | C13/M13 | Mesh mit HanS-Flur-1.OG-2.1 | nein | ||
44. | HanS-Flur-1.OG-2.1 | TL-WR841N | Gluon | C13/M13 | Mesh mit HanS-Flur-1.OG-2 | nein |
WLAN-Kanäle bei IEEE 802.11g und 802.11n (2,4 GHz überlappungsfrei bei 20 MHz Kanalbreite)
Quelle: www.elektronik-kompendium.de
Richtfunk
Lfd. Nr. | Knotenname | Standort | Routertyp | nach | Kommentar |
---|---|---|---|---|---|
01. | ffmwu-hans-fw1 | PowerBeam 5AC 400 | FW1 | AP PtP ffmwu-hans-fw1-11ac | |
02. | ffmwu-hans-opel | PowerBeam 5AC 400 | Opel | AP PtP ffmwu-hans-opel-11ac | |
03. | ffmwu-Accesspoint-client-Standort | PowerBeam 5AC 400 | Point-to-Point | ||
04. | ffmwu-Accesspoint-client-Standort | PowerBeam 5AC 400 | Point-to-Point | ||
05. | ffmwu-Accesspoint-client-Standort | NanoBeam 5AC 19 | Point-to-Point | ||
06. | ffmwu-Accesspoint-client-Standort | NanoBeam 5AC 19 | Point-to-Point | ||
07. | ffmwu-Accesspoint-client-Standort | NanoBeam 5AC 19 | Point-to-Point | ||
08. | ffmwu-Accesspoint-client-Standort | NanoBeam 5AC 19 | Point-to-Point | ||
09. | ffmwu-hans-11ac-116 | LiteBeam 5AC 16 120 | Luisenstraße | Point-to-Multipoint | |
10. | ffmwu-hans-weil | NanoBeam 5AC 19 | Weil | Point-to-Point |
Switche
Portbelegung der 5 Ubiquiti EdgeSwitch ES-24-250W, die in den Racks verbaut sind
HanS-EG-Switch-1
Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
---|---|---|---|---|
1 | 4 | untagged | WLAN EG 1.1 | 24V passive |
2 | 4 | untagged | WLAN EG 1.2 | 24V passive |
3 | 4 | untagged | WLAN EG 2.1 | 24V passive |
4 | 4 | untagged | WLAN EG 2.2 | 24V passive |
5 | 4 | untagged | WLAN EG 3.1 | 24V passive |
6 | 4 | untagged | WLAN EG 3.2 | 24V passive |
7 | 4 | untagged | WLAN EG 4.1 | 24V passive |
8 | 4 | untagged | WLAN EG 4.2 | 24V passive |
9 | 4 | untagged | WLAN 1.OG 1.1 | 24V passive |
10 | 4 | untagged | WLAN 1.OG 1.2 | 24V passive |
11 | 4 | untagged | WLAN 1.OG 2.1 | 24V passive |
12 | 4 | untagged | WLAN 1.OG 2.2 | 24V passive |
13 | 4 | untagged | WLAN 1.OG 3.1 | 24V passive |
14 | 4 | untagged | WLAN 1.OG 3.2 | 24V passive |
15 | 4 | untagged | WLAN 1.OG 4.1 | 24V passive |
16 | 4 | untagged | WLAN 1.OG 4.2 | 24V passive |
17 | 4 | untagged | WLAN 2.OG 1.1 | 24V passive |
18 | 4 | untagged | WLAN 2.OG 1.2 | 24V passive |
19 | 4 | untagged | WLAN 2.OG 2.1 | 24V passive |
20 | 4 | untagged | WLAN 2.OG 2.2 | 24V passive |
21 | 4 | untagged | frei | 24V passive |
22 | 4 | untagged | RaspberryPi B+ | disabled |
23 | 4 | untagged | frei/Out-of-Band Mgmt | disabled |
24 | 4 | tagged | Panel-A Port 1/Server-Port enp2s0f1 | disabled |
HanS-EG-Switch-2
Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
---|---|---|---|---|
1 | 5 | untagged | WLAN 2.OG 3.1 | 24V passive |
2 | 5 | untagged | WLAN 2.OG 3.2 | 24V passive |
3 | 5 | untagged | WLAN 2.OG 4.1 | 24V passive |
4 | 5 | untagged | WLAN 2.OG 4.2 | 24V passive |
5 | 5 | untagged | WLAN 3.OG 1.1 | 24V passive |
6 | 5 | untagged | WLAN 3.OG 1.2 | 24V passive |
7 | 5 | untagged | WLAN 3.OG 2.1 | 24V passive |
8 | 5 | untagged | WLAN 3.OG 2.2 | 24V passive |
9 | 5 | untagged | WLAN 3.OG 3.1 | 24V passive |
10 | 5 | untagged | WLAN 3.OG 3.2 | 24V passive |
11 | 5 | untagged | WLAN 3.OG 4.1 | 24V passive |
12 | 5 | untagged | WLAN 3.OG 4.2 | 24V passive |
13 | 5 | untagged | WLAN 4.OG 1.1 | 24V passive |
14 | 5 | untagged | WLAN 4.OG 1.2 | 24V passive |
15 | 5 | untagged | WLAN 4.OG 2.1 | 24V passive |
16 | 5 | untagged | WLAN 4.OG 2.2 | 24V passive |
17 | 5 | untagged | WLAN 4.OG 3.1 | 24V passive |
18 | 5 | untagged | WLAN 4.OG 3.2 | 24V passive |
19 | 5 | untagged | WLAN 4.OG 4.1 | 24V passive |
20 | 5 | untagged | WLAN 4.OG 4.2 | 24V passive |
21 | 5 | untagged | frei | 24V passive |
22 | 5 | untagged | frei | 24V passive |
23 | 5,317-322 | tagged | ffmwu-hans-sw03 Port 24 | disabled |
24 | 5,301,303,317-322 | tagged | Panel-A Port 2/Server-Port ens1f0 | disabled |
HanS-EG-Switch-3
Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
---|---|---|---|---|
1 | 301 | untagged | WLAN Flur EG 1.1 | 24V passive |
2 | 5 | untagged | WLAN Flur EG 1.2 | 24V passive |
3 | 5 | 303 | WLAN Flur EG 2.1 | 24V passive |
4 | 5 | untagged | WLAN Flur EG 2.2 | 24V passive |
5 | 5 | untagged | WLAN Flur 1.OG 1.1 | 24V passive |
6 | 5 | untagged | WLAN Flur 1.OG 1.2 | 24V passive |
7 | 5 | untagged | WLAN Flur 1.OG 2.1 | 24V passive |
8 | 5 | untagged | WLAN Flur 1.OG 2.2 | 24V passive |
9 | 5 | untagged | frei | 24V passive |
10 | 5 | untagged | frei | 24V passive |
11 | 5 | untagged | frei | 24V passive |
12 | 5 | untagged | frei | 24V passive |
13 | 5 | untagged | frei | 24V passive |
14 | 5 | untagged | frei | 24V passive |
15 | 5 | untagged | frei | 24V passive |
16 | 5 | untagged | frei | 24V passive |
17 | 5,317 | tagged | Dach 4.1 | 24V passive |
18 | 5,318 | tagged | Dach 4.2 | 24V passive |
19 | 5,319 | tagged | Dach 5.1 | 24V passive |
20 | 5,320 | tagged | Dach 5.2 | 24V passive |
21 | 5,321 | tagged | Dach 6.1 | 24V passive |
22 | 5,322 | tagged | Dach 6.2 | 24V passive |
23 | 5 | untagged | Out-of-Band Mgmt | disabled |
24 | 5,301,303,317-322 | tagged | ffmwu-hans-sw02 Port 23 | disabled |
HanS-8OG-Switch-4
Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
---|---|---|---|---|
1 | 5 | untagged | WLAN 5.OG 1.1 | 24V passive |
2 | 5 | untagged | WLAN 5.OG 1.2 | 24V passive |
3 | 5 | untagged | WLAN 5.OG 2.1 | 24V passive |
4 | 5 | untagged | WLAN 5.OG 2.2 | 24V passive |
5 | 5 | untagged | WLAN 5.OG 3.1 | 24V passive |
6 | 5 | untagged | WLAN 5.OG 3.2 | 24V passive |
7 | 5 | untagged | WLAN 5.OG 4.1 | 24V passive |
8 | 5 | untagged | WLAN 5.OG 4.2 | 24V passive |
9 | 5 | untagged | WLAN 6.OG 1.1 | 24V passive |
10 | 5 | untagged | WLAN 6.OG 1.2 | 24V passive |
11 | 5 | untagged | WLAN 6.OG 2.1 | 24V passive |
12 | 5 | untagged | WLAN 6.OG 2.2 | 24V passive |
13 | 5 | untagged | WLAN 6.OG 3.1 | 24V passive |
14 | 5 | untagged | WLAN 6.OG 3.2 | 24V passive |
15 | 5 | untagged | WLAN 6.OG 4.1 | 24V passive |
16 | 5 | untagged | WLAN 6.OG 4.2 | 24V passive |
17 | 5 | untagged | WLAN 7.OG 1.1 | 24V passive |
18 | 5 | untagged | WLAN 7.OG 1.2 | 24V passive |
19 | 5 | untagged | WLAN 7.OG 2.1 | 24V passive |
20 | 5 | untagged | WLAN 7.OG 2.2 | 24V passive |
21 | 5 | untagged | TL-WR841N | disabled |
22 | 5 | untagged | frei | 24V passive |
23 | 5 | untagged | Out-of-Band Mgmt | disabled |
24 | 5 | tagged | ffmwu-hans-sw05 Port 23 | disabled |
HanS-8OG-Switch-5
Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
---|---|---|---|---|
1 | 5 | untagged | WLAN 7.OG 3.1 | 24V passive |
2 | 5 | untagged | WLAN 7.OG 3.2 | 24V passive |
3 | 5 | untagged | WLAN 7.OG 4.1 | 24V passive |
4 | 5 | untagged | WLAN 7.OG 4.2 | 24V passive |
5 | 5 | untagged | WLAN 8.OG 1.1 | 24V passive |
6 | 5 | untagged | WLAN 8.OG 1.2 | 24V passive |
7 | 5 | untagged | WLAN 8.OG 2.1 | 24V passive |
8 | 5 | untagged | WLAN 8.OG 2.2 | 24V passive |
9 | 5 | untagged | WLAN 8.OG 3.1 | 24V passive |
10 | 5 | untagged | WLAN 8.OG 3.2 | 24V passive |
11 | 5 | untagged | WLAN 8.OG 4.1 | 24V passive |
12 | 5 | untagged | WLAN 8.OG 4.2 | 24V passive |
13 | 5,513 | tagged | Dach 1.1 | 24V passive |
14 | 5,514 | tagged | Dach 1.2 | 24V passive |
15 | 5,515 | tagged | Dach 2.1 | 24V passive |
16 | 5,516 | tagged | Dach 2.2 | 24V passive |
17 | 5,517 | tagged | Dach 3.1 | 24V passive |
18 | 5,518 | tagged | Dach 3.2 | 24V passive |
19 | 5 | untagged | frei | 24V passive |
20 | 6 | tagged | Telekom Uplink | disabled |
21 | 5 | untagged | integrated Lights-Out (iLO) | disabled |
22 | 5 | untagged | Out-of-Band Mgmt | disabled |
23 | 5 | tagged | ffmwu-hans-sw04 Port 24 | disabled |
24 | 5,513-518 | tagged | Server-Port ens1f1 | disabled |
Server
- Modell:HP ProLiant DL380 G5 2x Xeon E5450
- Betriebssystem: Ubuntu 16.04 LTS
- Virtualisierung: KVM/QEMU
Netzwerk Config
Installation Open vSwitch
apt-get install openvswitch-switch openvswitch-common
Anlegen der Open vSwitch Bridges
ovs-vsctl add-br br-sw01
ovs-vsctl add-port br-sw01 enp2s0f1
ovs-vsctl add-br br-sw02
ovs-vsctl add-port br-sw02 ens1f0
ovs-vsctl add-br br-sw05
ovs-vsctl add-port br-sw05 ens1f1
/etc/network/interfaces
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto br-ffwi
iface br-ffwi inet static
bridge_ports enp2s0f0
bridge_stp no
bridge_fd 0
address 10.56.2.139
netmask 255.255.192.0
gateway 10.56.0.161
dns-nameservers 10.56.0.161 10.56.0.23 10.56.0.231
# Uplink ffmwu-hans-sw01
auto enp2s0f1
iface enp2s0f1 inet manual
# Uplink ffmwu-hans-sw02
auto ens1f0
iface ens1f0 inet manual
# Uplink ffmwu-hans-sw05
auto ens1f1
iface ens1f1 inet manual
# Inter-Bridge Backbone-VM <-> Uplink-VM
auto br-gluonb2b
iface br-gluonb2b inet manual
bridge_ports none
bridge_stp no
bridge_fd 0
Libvirt Networks
Man legt z.B. nach /tmp/ die Netzwerk Definitionen ab.
Datei /tmp/ovs-sw01.xml
<networkstatus>
<class_id bitmap='0-2'/>
<floor sum='0'/>
<network>
<name>ovs-sw01</name>
<uuid>e5992f9c-4dc1-4f7d-b4e5-6865e80c57f0</uuid>
<forward mode='bridge'/>
<bridge name='br-sw01'/>
<virtualport type='openvswitch'/>
<portgroup name='vlan-all' default='yes'>
<vlan trunk='yes'>
<tag id='4'/>
</vlan>
</portgroup>
</network>
</networkstatus>
Datei /tmp/ovs-sw02.xml
<networkstatus>
<class_id bitmap='0-2'/>
<floor sum='0'/>
<network>
<name>ovs-sw02</name>
<uuid>3ceae5b0-cdb4-4996-a0d0-be5f206ed3c2</uuid>
<forward mode='bridge'/>
<bridge name='br-sw02'/>
<virtualport type='openvswitch'/>
<portgroup name='vlan-all' default='yes'>
<vlan trunk='yes'>
<tag id='5'/>
<tag id='301'/>
<tag id='303'/>
<tag id='317'/>
<tag id='318'/>
<tag id='319'/>
<tag id='320'/>
<tag id='321'/>
<tag id='322'/>
</vlan>
</portgroup>
</network>
</networkstatus>
Datei /tmp/ovs-sw05.xml
<networkstatus>
<class_id bitmap='0-2'/>
<floor sum='0'/>
<network>
<name>ovs-sw05</name>
<uuid>c22babeb-8513-4b83-b4eb-ea9252500477</uuid>
<forward mode='bridge'/>
<bridge name='br-sw05'/>
<virtualport type='openvswitch'/>
<portgroup name='vlan-all' default='yes'>
<vlan trunk='yes'>
<tag id='5'/>
<tag id='513'/>
<tag id='514'/>
<tag id='515'/>
<tag id='516'/>
<tag id='517'/>
<tag id='518'/>
</vlan>
</portgroup>
<portgroup name='vlan-6'>
<vlan>
<tag id='6'/>
</vlan>
</network>
</networkstatus>
Netzwerk-Definitionen einlesen, starten und für den Autostart markieren.
virsh net-define /tmp/ovs-sw01.xml
virsh net-define /tmp/ovs-sw02.xml
virsh net-define /tmp/ovs-sw05.xml
virsh net-start ovs-sw01
virsh net-start ovs-sw02
virsh net-start ovs-sw05
virsh net-autostart ovs-sw01
virsh net-autostart ovs-sw02
virsh net-autostart ovs-sw05
Libvirt Domain Configs
Per default werden die Namen für virtuelle Netzwerkkarten der VMs auf dem Host dynamisch nach dem Schema vnetX vergeben. Für die OpenvSwitch Konfiguration benötigen wir aber persistente Interface-Namen. Diese werden in den <target dev=/> Direktiven gesetzt.
ffmwu-hans-core
<domain type='kvm' id='1'>
<name>ffmwu-hans-core</name>
<uuid>04502792-af13-41de-9073-a777ec8eea80</uuid>
<memory unit='KiB'>524288</memory>
<currentMemory unit='KiB'>524288</currentMemory>
<vcpu placement='static'>1</vcpu>
<resource>
<partition>/machine</partition>
</resource>
<os>
<type arch='x86_64' machine='pc-i440fx-wily'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
<apic/>
<vmport state='off'/>
</features>
<cpu mode='host-model'>
<model fallback='allow'/>
</cpu>
<clock offset='utc'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<pm>
<suspend-to-mem enabled='no'/>
<suspend-to-disk enabled='no'/>
</pm>
<devices>
<emulator>/usr/bin/kvm-spice</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/ffmwu-hans-core.img'/>
<backingStore/>
<target dev='vda' bus='virtio'/>
<alias name='virtio-disk0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
</disk>
<controller type='usb' index='0' model='ich9-ehci1'>
<alias name='usb'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<alias name='usb'/>
<master startport='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<alias name='usb'/>
<master startport='2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci3'>
<alias name='usb'/>
<master startport='4'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
</controller>
<controller type='pci' index='0' model='pci-root'>
<alias name='pci.0'/>
</controller>
<controller type='virtio-serial' index='0'>
<alias name='virtio-serial0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</controller>
<interface type='bridge'>
<mac address='52:54:00:93:ba:bb'/>
<source network='ovs-sw05' portgroup='vlan-all' bridge='br-sw05'/>
<vlan trunk='yes'>
<tag id='5'/>
<tag id='513'/>
<tag id='514'/>
<tag id='515'/>
<tag id='516'/>
<tag id='517'/>
<tag id='518'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='55521f0b-3c6e-4855-8fb2-7fa265da3ac2'/>
</virtualport>
<target dev='vcoresw05'/>
<model type='virtio'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:f7:8b:a8'/>
<source bridge='br-gluonb2b'/>
<target dev='vcoreb2b'/>
<model type='virtio'/>
<alias name='net1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0c' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:3c:50:59'/>
<source network='ovs-sw02' portgroup='vlan-all' bridge='br-sw02'/>
<vlan trunk='yes'>
<tag id='5'/>
<tag id='301'/>
<tag id='303'/>
<tag id='317'/>
<tag id='318'/>
<tag id='319'/>
<tag id='320'/>
<tag id='321'/>
<tag id='322'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='959931f7-7eb8-46a9-9c8b-c100e4c9fea8'/>
</virtualport>
<target dev='vcoresw02'/>
<model type='virtio'/>
<alias name='net2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</interface>
<serial type='pty'>
<source path='/dev/pts/0'/>
<target port='0'/>
<alias name='serial0'/>
</serial>
<console type='pty' tty='/dev/pts/0'>
<source path='/dev/pts/0'/>
<target type='serial' port='0'/>
<alias name='serial0'/>
</console>
<channel type='spicevmc'>
<target type='virtio' name='com.redhat.spice.0' state='disconnected'/>
<alias name='channel0'/>
<address type='virtio-serial' controller='0' bus='0' port='1'/>
</channel>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
<graphics type='spice' port='5900' autoport='yes' listen='127.0.0.1'>
<listen type='address' address='127.0.0.1' fromConfig='1'/>
</graphics>
<sound model='ich6'>
<alias name='sound0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</sound>
<video>
<model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1'/>
<alias name='video0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<redirdev bus='usb' type='spicevmc'>
<alias name='redir0'/>
</redirdev>
<redirdev bus='usb' type='spicevmc'>
<alias name='redir1'/>
</redirdev>
<watchdog model='i6300esb' action='reset'>
<alias name='watchdog0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</watchdog>
<memballoon model='virtio'>
<alias name='balloon0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
</memballoon>
</devices>
<seclabel type='dynamic' model='apparmor' relabel='yes'>
<label>libvirt-04502792-af13-41de-9073-a777ec8eea80</label>
<imagelabel>libvirt-04502792-af13-41de-9073-a777ec8eea80</imagelabel>
</seclabel>
</domain>
ffmwu-hans-uplink
<domain type='kvm' id='15'>
<name>ffmwu-hans-uplink</name>
<uuid>d768984d-d16e-400d-9a22-273f45bd9ab2</uuid>
<memory unit='KiB'>524288</memory>
<currentMemory unit='KiB'>524288</currentMemory>
<vcpu placement='static'>1</vcpu>
<resource>
<partition>/machine</partition>
</resource>
<os>
<type arch='x86_64' machine='pc-i440fx-wily'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
<apic/>
<vmport state='off'/>
</features>
<cpu mode='custom' match='exact'>
<model fallback='allow'>Nehalem</model>
</cpu>
<clock offset='utc'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<pm>
<suspend-to-mem enabled='no'/>
<suspend-to-disk enabled='no'/>
</pm>
<devices>
<emulator>/usr/bin/kvm-spice</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/ffmwu-hans-uplink.img'/>
<backingStore/>
<target dev='vda' bus='virtio'/>
<alias name='virtio-disk0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</disk>
<controller type='usb' index='0' model='ich9-ehci1'>
<alias name='usb'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<alias name='usb'/>
<master startport='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<alias name='usb'/>
<master startport='2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci3'>
<alias name='usb'/>
<master startport='4'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
</controller>
<controller type='pci' index='0' model='pci-root'>
<alias name='pci.0'/>
</controller>
<controller type='virtio-serial' index='0'>
<alias name='virtio-serial0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</controller>
<controller type='ide' index='0'>
<alias name='ide'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
<controller type='scsi' index='0'>
<alias name='scsi0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
</controller>
<interface type='bridge'>
<mac address='52:54:00:fd:c1:33'/>
<source network='ovs-sw05' portgroup='vlan-6' bridge='br-sw05'/>
<vlan>
<tag id='6'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='789cf088-db1a-47a5-9cc9-334d1366546d'/>
</virtualport>
<target dev='vuplsw05'/>
<model type='virtio'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:f5:1e:09'/>
<source bridge='br-gluonb2b'/>
<target dev='vuplb2b'/>
<model type='virtio'/>
<alias name='net1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:e7:71:af'/>
<source network='ovs-sw01' portgroup='vlan-all' bridge='br-sw01'/>
<vlan trunk='yes'>
<tag id='4'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='5d824f23-d60c-443f-9c00-429f0bdd7943'/>
</virtualport>
<target dev='vuplsw01'/>
<model type='virtio'/>
<alias name='net2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</interface>
<serial type='pty'>
<source path='/dev/pts/2'/>
<target port='0'/>
<alias name='serial0'/>
</serial>
<console type='pty' tty='/dev/pts/2'>
<source path='/dev/pts/2'/>
<target type='serial' port='0'/>
<alias name='serial0'/>
</console>
<channel type='spicevmc'>
<target type='virtio' name='com.redhat.spice.0' state='disconnected'/>
<alias name='channel0'/>
<address type='virtio-serial' controller='0' bus='0' port='1'/>
</channel>
<input type='tablet' bus='usb'>
<alias name='input0'/>
</input>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
<graphics type='spice' port='5901' autoport='yes' listen='127.0.0.1'>
<listen type='address' address='127.0.0.1' fromConfig='1'/>
</graphics>
<sound model='ich6'>
<alias name='sound0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</sound>
<video>
<model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1'/>
<alias name='video0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<redirdev bus='usb' type='spicevmc'>
<alias name='redir0'/>
</redirdev>
<redirdev bus='usb' type='spicevmc'>
<alias name='redir1'/>
</redirdev>
<memballoon model='virtio'>
<alias name='balloon0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
</memballoon>
</devices>
<seclabel type='dynamic' model='apparmor' relabel='yes'>
<label>libvirt-d768984d-d16e-400d-9a22-273f45bd9ab2</label>
<imagelabel>libvirt-d768984d-d16e-400d-9a22-273f45bd9ab2</imagelabel>
</seclabel>
</domain>
Open vSwitch Konfiguration
Die Konfiguration der Open vSwitch Switche sieht dann wie folgt aus:
root@HanS-Server:~# ovs-vsctl show
cd407941-c84e-484c-9b7c-426050da8e74
Bridge "br-sw05"
Port "vcoresw05"
trunks: [5, 513, 514, 515, 516, 517, 518]
Interface "vcoresw05"
Port "ens1f1"
Interface "ens1f1"
Port "vuplsw05"
tag: 6
Interface "vuplsw05"
Port "br-sw05"
Interface "br-sw05"
type: internal
Bridge "br-sw02"
Port "br-sw02"
Interface "br-sw02"
type: internal
Port "vcoresw02"
trunks: [5, 301, 303, 317, 318, 319, 320, 321, 322]
Interface "vcoresw02"
Port "ens1f0"
Interface "ens1f0"
Bridge "br-sw01"
Port "vuplsw01"
trunks: [4]
Interface "vuplsw01"
Port "br-sw01"
Interface "br-sw01"
type: internal
Port "enp2s0f1"
Interface "enp2s0f1"
ovs_version: "2.5.0"
root@HanS-Server:~# ovs-vsctl list-br
br-sw01
br-sw02
br-sw05
root@HanS-Server:~# ovs-vsctl list-ifaces br-sw01
enp2s0f1
vuplsw01
root@HanS-Server:~# ovs-vsctl list-ifaces br-sw02
ens1f0
vcoresw02
root@HanS-Server:~# ovs-vsctl list-ifaces br-sw05
ens1f1
vcoresw05
vuplsw05
VM-Watchdog-Script
Wenn die VM unerwartet crasht, kann diese per Remote nicht resettet werden. Dies machen wir automatisiert mit diesem Script, das in /usr/local/bin liegt.
#!/bin/bash
count=$( ping6 -c 5 fd56:b4dc:4b1e:0:5054:ff:fedd:cc9d | grep "bytes from" | wc -l )
if [ $count -eq 0 ]
then
logger "ffmwu-hans-core: Not available -> Reset VM"
virsh reset ffmwu-hans-core || virsh start ffmwu-hans-core
exit 0
else
logger "ffmwu-hans-core: Up and running -> nothing to do"
exit 0
fi
#!/bin/bash
count=$( ping6 -c 5 fd56:b4dc:4b1e:0:5054:ff:fe1c:8661 | grep "bytes from" | wc -l )
if [ $count -eq 0 ]
then
logger "ffmwu-hans-core: Not available -> Reset VM"
virsh reset ffmwu-hans-core || virsh start ffmwu-hans-core
exit 0
else
logger "ffmwu-hans-core: Up and running -> nothing to do"
exit 0
fi
Per cronjob wird es alle 20 Minuten ausgeführt
# m h dom mon dow command
*/20 * * * * /usr/local/bin/ffmwu-hans-core.sh
*/20 * * * * /usr/local/bin/ffmwu-hans-uplink.sh
Uplink
- via Richtfunk
- 16.000 DSL Telekom
Dokumente
Flucht- & Rettungspläne
Planung
geplante Technik
- Hardwareplanung für das Projekt vom 03.03.2016
Produkt | Anzahl | Einzelpreis | Gesamt | Kommentar | Händler |
---|---|---|---|---|---|
Haupthaus | |||||
TP-Link CPE210 | 32 | 59,90 € | 1.916,80 € | Client AP | Völkner |
Ubiquiti EdgeSwitch ES-24-250W | 5 | 416,70 € | 2.083,50 € | PoE-Switch | jacob |
APC Smart-UPS 1000VA LCD RM 2U 230V | 2 | 466,60 € | 933,20 € | USV für 5 Switche + Server | jacob |
LogiLink 19" Steckdosenleiste, 8-fach mit Schalter | 2 | 22,50 € | 45,00 € | Steckdosenleiste für Serverschrank | jacob |
HP ProLiant DL380 G5 2x Xeon E5450 | 1 | 249,99 € | 249,99 € | Server | servershop24 |
HP NC364T Quad Port Gigabit Server Adapter | 2 | 49,99 € | 99,98 € | 4x Port RJ45 Netzwerkkarte | servershop24 |
HP 19" Rackmount-Schienen | 1 | 7,99 € | 7,99 € | 19" Rackmount-Schienen für Server | servershop24 |
Wandhalterung - 25cm (L) x 25cm (H) | 32 | 5,49 € | 175,68 € | Halterung für TP-Link CPE210 | varia-store |
Patchkabel | 200 | 1,99 € | 398,00 € | Patchkabel für TP-Link CPE210 | Völkner |
Kleinmaterial | 1 | 100,00 € | 100,00 € | ||
Zwischensumme | 6108,15 € | ||||
Anbau | |||||
TP-Link CPE210 | 8 | 59,90 € | 479,20 € | Client AP | Völkner |
TP-Link WR841N | 5 | 15,94 € | 79,70 € | Client Mesh | Völkner |
Wandhalterung - 25cm (L) x 25cm (H) | 8 | 5,49 € | 43,92 € | Halterung für TP-Link CPE210 | varia-store |
Zwischensumme | 602,62 € | ||||
Aufenthaltsraum | |||||
TP-Link CPE210 | 4 | 59,90 € | 239,60 € | Client AP | Völkner |
Wandhalterung - 25cm (L) x 25cm (H) | 4 | 5,49 € | 21,96 € | Halterung für TP-Link CPE210 | varia-store |
Zwischensumme | 261,56 € | ||||
Dach | |||||
NBE-5AC-19 | 4 | 99,20 € | 396,80 € | Backbone | jacob |
PBE-5AC-400 | 4 | 109,40 € | 437,60 € | Backbone | jacob |
LBE-5AC-16-120 | 1 | 89,90 € | 89,90 € | Backbone | jacob |
Zwischensumme | 924,30 € | ||||
Gesamtsumme | 7896,63 € |