Wiesbaden/Projekte/Hans Bredow Straße: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Kokel (Diskussion | Beiträge) |
Kokel (Diskussion | Beiträge) |
||
| (25 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt) | |||
| Zeile 9: | Zeile 9: | ||
| Verantwortlicher || GÜ-NN1 | | Verantwortlicher || GÜ-NN1 | ||
|- | |- | ||
| − | | Mitglieder || Axel, Benito, GÜ-NN1, Peter, Volker | + | | Mitglieder || Axel, Benito, GÜ-NN1, Peter, Volker, Kokel |
|- | |- | ||
| Planungs-Mailing-Liste || [https://lists.freifunk-mwu.de/mailman/listinfo/hans Hans] | | Planungs-Mailing-Liste || [https://lists.freifunk-mwu.de/mailman/listinfo/hans Hans] | ||
| Zeile 24: | Zeile 24: | ||
==aktueller Stand== | ==aktueller Stand== | ||
| + | * 2016-11-22 | 01 Pers. X 01 h | Server neustarten, 1x WR1043ND installiert | ||
| + | * 2016-11-15 | 01 Pers. X 02 h | Server neustarten, 2x CPEs + 1x 841er konfiguriert | ||
| + | * 2016-11-11 | 01 Pers. X 01 h | Server neustarten, Gespraeche, Router umstecken | ||
| + | * 2016-10-10 | 01 Pers. X 02 h | Wartung; Config-Reset einer CPE; Umpatchung einer CPE | ||
| + | * 2016-09-11 | 01 Pers. X 02 h | Inbetriebnahme Switche 1-3/Technikraum EG; Ausrichtung PBE-5AC-400 in Richtung Opelbad; Einweisung Hausmeister umpatchen CPEs | ||
* 2016-08-25 | 02 Pers. X 02 h | Ausrichtung NB5-AC zu Weilstraße | * 2016-08-25 | 02 Pers. X 02 h | Ausrichtung NB5-AC zu Weilstraße | ||
* 2016-08-12 | 01 Pers. X 01 h | Telekomrouter konfiguriert | * 2016-08-12 | 01 Pers. X 01 h | Telekomrouter konfiguriert | ||
| Zeile 88: | Zeile 93: | ||
! Standort | ! Standort | ||
! Routertyp | ! Routertyp | ||
| + | ! Firmware | ||
! 2,4GHz | ! 2,4GHz | ||
! IPv4 | ! IPv4 | ||
! Kommentar | ! Kommentar | ||
| + | ! In Betrieb | ||
|- | |- | ||
| 01. | | 01. | ||
| Zeile 96: | Zeile 103: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C01/M00 | | C01/M00 | ||
| − | | 10.56.8. | + | | 10.56.8.1 |
| | | | ||
| + | | nein | ||
|- | |- | ||
| 02. | | 02. | ||
| Zeile 104: | Zeile 113: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C05/M00 | | C05/M00 | ||
| 10.56.8.2 | | 10.56.8.2 | ||
| | | | ||
| + | | nein | ||
|- | |- | ||
| 03. | | 03. | ||
| Zeile 112: | Zeile 123: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C09/M00 | | C09/M00 | ||
| 10.56.8.3 | | 10.56.8.3 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 04. | | 04. | ||
| Zeile 120: | Zeile 133: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C13/M00 | | C13/M00 | ||
| 10.56.8.4 | | 10.56.8.4 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 05. | | 05. | ||
| Zeile 128: | Zeile 143: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C13/M00 | | C13/M00 | ||
| 10.56.8.5 | | 10.56.8.5 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 06. | | 06. | ||
| Zeile 136: | Zeile 153: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C09/M00 | | C09/M00 | ||
| 10.56.8.6 | | 10.56.8.6 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 07. | | 07. | ||
| Zeile 144: | Zeile 163: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C05/M00 | | C05/M00 | ||
| 10.56.8.7 | | 10.56.8.7 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 08. | | 08. | ||
| Zeile 152: | Zeile 173: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C01/M00 | | C01/M00 | ||
| 10.56.8.8 | | 10.56.8.8 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 09. | | 09. | ||
| Zeile 160: | Zeile 183: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C01/M00 | | C01/M00 | ||
| 10.56.8.9 | | 10.56.8.9 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 10. | | 10. | ||
| Zeile 168: | Zeile 193: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C05/M00 | | C05/M00 | ||
| 10.56.8.10 | | 10.56.8.10 | ||
| | | | ||
| + | | nein | ||
|- | |- | ||
| 11. | | 11. | ||
| Zeile 176: | Zeile 203: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C09/M00 | | C09/M00 | ||
| 10.56.8.11 | | 10.56.8.11 | ||
| | | | ||
| + | | nein | ||
|- | |- | ||
| 12. | | 12. | ||
| Zeile 184: | Zeile 213: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C13/M00 | | C13/M00 | ||
| 10.56.8.12 | | 10.56.8.12 | ||
| | | | ||
| + | | nein | ||
|- | |- | ||
| 13. | | 13. | ||
| Zeile 192: | Zeile 223: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C13/M00 | | C13/M00 | ||
| 10.56.8.13 | | 10.56.8.13 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 14. | | 14. | ||
| Zeile 200: | Zeile 233: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C09/M00 | | C09/M00 | ||
| 10.56.8.14 | | 10.56.8.14 | ||
| | | | ||
| + | | nein | ||
|- | |- | ||
| 15. | | 15. | ||
| Zeile 208: | Zeile 243: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C05/M00 | | C05/M00 | ||
| 10.56.8.15 | | 10.56.8.15 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 16. | | 16. | ||
| Zeile 216: | Zeile 253: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C01/M00 | | C01/M00 | ||
| 10.56.8.16 | | 10.56.8.16 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 17. | | 17. | ||
| Zeile 224: | Zeile 263: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C01/M00 | | C01/M00 | ||
| 10.56.8.17 | | 10.56.8.17 | ||
| | | | ||
| + | | nein | ||
|- | |- | ||
| 18. | | 18. | ||
| Zeile 232: | Zeile 273: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C05/M00 | | C05/M00 | ||
| 10.56.8.18 | | 10.56.8.18 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 19. | | 19. | ||
| Zeile 240: | Zeile 283: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C09/M00 | | C09/M00 | ||
| 10.56.8.19 | | 10.56.8.19 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 20. | | 20. | ||
| Zeile 248: | Zeile 293: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C13/M00 | | C13/M00 | ||
| 10.56.8.20 | | 10.56.8.20 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 21. | | 21. | ||
| Zeile 256: | Zeile 303: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C13/M00 | | C13/M00 | ||
| 10.56.8.21 | | 10.56.8.21 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 22. | | 22. | ||
| Zeile 264: | Zeile 313: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C09/M00 | | C09/M00 | ||
| 10.56.8.22 | | 10.56.8.22 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 23. | | 23. | ||
| Zeile 272: | Zeile 323: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C05/M00 | | C05/M00 | ||
| 10.56.8.23 | | 10.56.8.23 | ||
| | | | ||
| + | | nein | ||
|- | |- | ||
| 24. | | 24. | ||
| Zeile 280: | Zeile 333: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C01/M00 | | C01/M00 | ||
| 10.56.8.24 | | 10.56.8.24 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 25. | | 25. | ||
| Zeile 288: | Zeile 343: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C01/M00 | | C01/M00 | ||
| 10.56.8.25 | | 10.56.8.25 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 26. | | 26. | ||
| Zeile 296: | Zeile 353: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C05/M00 | | C05/M00 | ||
| 10.56.8.26 | | 10.56.8.26 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 27. | | 27. | ||
| Zeile 304: | Zeile 363: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C09/M00 | | C09/M00 | ||
| 10.56.8.27 | | 10.56.8.27 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 28. | | 28. | ||
| Zeile 312: | Zeile 373: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C13/M00 | | C13/M00 | ||
| 10.56.8.28 | | 10.56.8.28 | ||
| | | | ||
| + | | nein | ||
|- | |- | ||
| 29. | | 29. | ||
| Zeile 320: | Zeile 383: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C13/M00 | | C13/M00 | ||
| 10.56.8.29 | | 10.56.8.29 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 30. | | 30. | ||
| Zeile 328: | Zeile 393: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C09/M00 | | C09/M00 | ||
| 10.56.8.30 | | 10.56.8.30 | ||
| | | | ||
| + | | nein | ||
|- | |- | ||
| 31. | | 31. | ||
| Zeile 336: | Zeile 403: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C05/M00 | | C05/M00 | ||
| 10.56.8.31 | | 10.56.8.31 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 32. | | 32. | ||
| Zeile 344: | Zeile 413: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C01/M00 | | C01/M00 | ||
| 10.56.8.32 | | 10.56.8.32 | ||
| | | | ||
| + | | nein | ||
|- | |- | ||
| 33. | | 33. | ||
| Zeile 352: | Zeile 423: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C01/M00 | | C01/M00 | ||
| 10.56.8.33 | | 10.56.8.33 | ||
| | | | ||
| + | | nein | ||
|- | |- | ||
| 34. | | 34. | ||
| Zeile 360: | Zeile 433: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C05/M00 | | C05/M00 | ||
| 10.56.8.34 | | 10.56.8.34 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 35. | | 35. | ||
| Zeile 368: | Zeile 443: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C09/M00 | | C09/M00 | ||
| 10.56.8.35 | | 10.56.8.35 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 36. | | 36. | ||
| Zeile 376: | Zeile 453: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | PharOS | ||
| C13/M00 | | C13/M00 | ||
| 10.56.8.36 | | 10.56.8.36 | ||
| | | | ||
| + | | ja | ||
|- | |- | ||
| 37. | | 37. | ||
| Zeile 384: | Zeile 463: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | Gluon | ||
| C01/M01 | | C01/M01 | ||
| | | | ||
| Mesh mit HanS-Flur-EG-1.1 | | Mesh mit HanS-Flur-EG-1.1 | ||
| + | | ja | ||
|- | |- | ||
| 38. | | 38. | ||
| Zeile 392: | Zeile 473: | ||
| | | | ||
| TL-WR841N | | TL-WR841N | ||
| + | | Gluon | ||
| C01/M01 | | C01/M01 | ||
| | | | ||
| Mesh mit HanS-Flur-EG-1 | | Mesh mit HanS-Flur-EG-1 | ||
| + | | nein | ||
|- | |- | ||
| 39. | | 39. | ||
| Zeile 400: | Zeile 483: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | Gluon | ||
| C05/M05 | | C05/M05 | ||
| | | | ||
| Mesh mit HanS-Flur-EG-2.1 | | Mesh mit HanS-Flur-EG-2.1 | ||
| + | | ja | ||
|- | |- | ||
| 40. | | 40. | ||
| Zeile 408: | Zeile 493: | ||
| | | | ||
| TL-WR841N | | TL-WR841N | ||
| + | | Gluon | ||
| C05/M05 | | C05/M05 | ||
| | | | ||
| Mesh mit HanS-Flur-EG-2 | | Mesh mit HanS-Flur-EG-2 | ||
| + | | nein | ||
|- | |- | ||
| 41. | | 41. | ||
| Zeile 416: | Zeile 503: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | Gluon | ||
| C09/M09 | | C09/M09 | ||
| | | | ||
| Mesh mit HanS-Flur-1.OG-1.1 | | Mesh mit HanS-Flur-1.OG-1.1 | ||
| + | | nein | ||
|- | |- | ||
| 42. | | 42. | ||
| Zeile 424: | Zeile 513: | ||
| | | | ||
| TL-WR841N | | TL-WR841N | ||
| + | | Gluon | ||
| C09/M09 | | C09/M09 | ||
| | | | ||
| Mesh mit HanS-Flur-1.OG-1 | | Mesh mit HanS-Flur-1.OG-1 | ||
| + | | nein | ||
|- | |- | ||
| 43. | | 43. | ||
| Zeile 432: | Zeile 523: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
| + | | Gluon | ||
| C13/M13 | | C13/M13 | ||
| | | | ||
| Mesh mit HanS-Flur-1.OG-2.1 | | Mesh mit HanS-Flur-1.OG-2.1 | ||
| + | | nein | ||
|- | |- | ||
| 44. | | 44. | ||
| Zeile 440: | Zeile 533: | ||
| | | | ||
| TL-WR841N | | TL-WR841N | ||
| + | | Gluon | ||
| C13/M13 | | C13/M13 | ||
| | | | ||
| Mesh mit HanS-Flur-1.OG-2 | | Mesh mit HanS-Flur-1.OG-2 | ||
| + | | nein | ||
|} | |} | ||
| Zeile 547: | Zeile 642: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
| − | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
| 1 | | 1 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 1.1 | | WLAN EG 1.1 | ||
| Zeile 557: | Zeile 652: | ||
|- | |- | ||
| 2 | | 2 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 1.2 | | WLAN EG 1.2 | ||
| Zeile 563: | Zeile 658: | ||
|- | |- | ||
| 3 | | 3 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 2.1 | | WLAN EG 2.1 | ||
| Zeile 569: | Zeile 664: | ||
|- | |- | ||
| 4 | | 4 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 2.2 | | WLAN EG 2.2 | ||
| Zeile 575: | Zeile 670: | ||
|- | |- | ||
| 5 | | 5 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 3.1 | | WLAN EG 3.1 | ||
| Zeile 581: | Zeile 676: | ||
|- | |- | ||
| 6 | | 6 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 3.2 | | WLAN EG 3.2 | ||
| Zeile 587: | Zeile 682: | ||
|- | |- | ||
| 7 | | 7 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 4.1 | | WLAN EG 4.1 | ||
| Zeile 593: | Zeile 688: | ||
|- | |- | ||
| 8 | | 8 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 4.2 | | WLAN EG 4.2 | ||
| Zeile 599: | Zeile 694: | ||
|- | |- | ||
| 9 | | 9 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 1.1 | | WLAN 1.OG 1.1 | ||
| Zeile 605: | Zeile 700: | ||
|- | |- | ||
| 10 | | 10 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 1.2 | | WLAN 1.OG 1.2 | ||
| Zeile 611: | Zeile 706: | ||
|- | |- | ||
| 11 | | 11 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 2.1 | | WLAN 1.OG 2.1 | ||
| Zeile 617: | Zeile 712: | ||
|- | |- | ||
| 12 | | 12 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 2.2 | | WLAN 1.OG 2.2 | ||
| Zeile 623: | Zeile 718: | ||
|- | |- | ||
| 13 | | 13 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 3.1 | | WLAN 1.OG 3.1 | ||
| Zeile 629: | Zeile 724: | ||
|- | |- | ||
| 14 | | 14 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 3.2 | | WLAN 1.OG 3.2 | ||
| Zeile 635: | Zeile 730: | ||
|- | |- | ||
| 15 | | 15 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 4.1 | | WLAN 1.OG 4.1 | ||
| Zeile 641: | Zeile 736: | ||
|- | |- | ||
| 16 | | 16 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 4.2 | | WLAN 1.OG 4.2 | ||
| Zeile 647: | Zeile 742: | ||
|- | |- | ||
| 17 | | 17 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 2.OG 1.1 | | WLAN 2.OG 1.1 | ||
| Zeile 653: | Zeile 748: | ||
|- | |- | ||
| 18 | | 18 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 2.OG 1.2 | | WLAN 2.OG 1.2 | ||
| Zeile 659: | Zeile 754: | ||
|- | |- | ||
| 19 | | 19 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 2.OG 2.1 | | WLAN 2.OG 2.1 | ||
| Zeile 665: | Zeile 760: | ||
|- | |- | ||
| 20 | | 20 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 2.OG 2.2 | | WLAN 2.OG 2.2 | ||
| Zeile 671: | Zeile 766: | ||
|- | |- | ||
| 21 | | 21 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| − | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 22 | | 22 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| RaspberryPi B+ | | RaspberryPi B+ | ||
| Zeile 683: | Zeile 778: | ||
|- | |- | ||
| 23 | | 23 | ||
| − | | | + | | 4 |
| untagged | | untagged | ||
| − | | Out-of-Band Mgmt | + | | frei/Out-of-Band Mgmt |
| disabled | | disabled | ||
|- | |- | ||
| 24 | | 24 | ||
| − | | | + | | 4 |
| tagged | | tagged | ||
| − | | Panel-A Port 1 | + | | Panel-A Port 1/Server-Port enp2s0f1 |
| disabled | | disabled | ||
|} | |} | ||
| Zeile 702: | Zeile 797: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
| − | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
| Zeile 828: | Zeile 923: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
| − | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| Zeile 834: | Zeile 929: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
| − | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| Zeile 840: | Zeile 935: | ||
| 5,317-322 | | 5,317-322 | ||
| tagged | | tagged | ||
| − | | ffmwu-hans-sw03 | + | | ffmwu-hans-sw03 Port 24 |
| disabled | | disabled | ||
|- | |- | ||
| 24 | | 24 | ||
| − | | 5,317-322 | + | | 5,301,303,317-322 |
| tagged | | tagged | ||
| − | | Panel-A Port 2 | + | | Panel-A Port 2/Server-Port ens1f0 |
| disabled | | disabled | ||
|} | |} | ||
| Zeile 857: | Zeile 952: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
| − | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
| 1 | | 1 | ||
| − | | | + | | 301 |
| untagged | | untagged | ||
| WLAN Flur EG 1.1 | | WLAN Flur EG 1.1 | ||
| Zeile 874: | Zeile 969: | ||
| 3 | | 3 | ||
| 5 | | 5 | ||
| − | | | + | | 303 |
| WLAN Flur EG 2.1 | | WLAN Flur EG 2.1 | ||
| 24V passive | | 24V passive | ||
| Zeile 911: | Zeile 1.006: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
| − | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| Zeile 917: | Zeile 1.012: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
| − | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| Zeile 923: | Zeile 1.018: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
| − | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| Zeile 929: | Zeile 1.024: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
| − | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| Zeile 935: | Zeile 1.030: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
| − | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| Zeile 941: | Zeile 1.036: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
| − | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| Zeile 947: | Zeile 1.042: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
| − | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| Zeile 953: | Zeile 1.048: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
| − | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| Zeile 999: | Zeile 1.094: | ||
|- | |- | ||
| 24 | | 24 | ||
| − | | 5,317-322 | + | | 5,301,303,317-322 |
| tagged | | tagged | ||
| − | | ffmwu-hans-sw02 | + | | ffmwu-hans-sw02 Port 23 |
| disabled | | disabled | ||
|} | |} | ||
| Zeile 1.012: | Zeile 1.107: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
| − | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
| Zeile 1.144: | Zeile 1.239: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
| − | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| Zeile 1.156: | Zeile 1.251: | ||
| 5 | | 5 | ||
| tagged | | tagged | ||
| − | | | + | | ffmwu-hans-sw05 Port 23 |
| disabled | | disabled | ||
|} | |} | ||
| Zeile 1.167: | Zeile 1.262: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
| − | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
| Zeile 1.281: | Zeile 1.376: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
| − | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| Zeile 1.305: | Zeile 1.400: | ||
| 5 | | 5 | ||
| tagged | | tagged | ||
| − | | | + | | ffmwu-hans-sw04 Port 24 |
| disabled | | disabled | ||
|- | |- | ||
| Zeile 1.311: | Zeile 1.406: | ||
| 5,513-518 | | 5,513-518 | ||
| tagged | | tagged | ||
| − | | Server-Port | + | | Server-Port ens1f1 |
| disabled | | disabled | ||
|} | |} | ||
| Zeile 1.391: | Zeile 1.486: | ||
<portgroup name='vlan-all' default='yes'> | <portgroup name='vlan-all' default='yes'> | ||
<vlan trunk='yes'> | <vlan trunk='yes'> | ||
| − | <tag id=' | + | <tag id='4'/> |
</vlan> | </vlan> | ||
</portgroup> | </portgroup> | ||
| Zeile 1.412: | Zeile 1.507: | ||
<vlan trunk='yes'> | <vlan trunk='yes'> | ||
<tag id='5'/> | <tag id='5'/> | ||
| + | <tag id='301'/> | ||
| + | <tag id='303'/> | ||
<tag id='317'/> | <tag id='317'/> | ||
<tag id='318'/> | <tag id='318'/> | ||
| Zeile 1.470: | Zeile 1.567: | ||
====Libvirt Domain Configs==== | ====Libvirt Domain Configs==== | ||
| + | Per default werden die Namen für virtuelle Netzwerkkarten der VMs auf dem Host dynamisch nach dem Schema vnetX vergeben. | ||
| + | Für die OpenvSwitch Konfiguration benötigen wir aber persistente Interface-Namen. Diese werden in den <target dev=''/> Direktiven gesetzt. | ||
| + | |||
ffmwu-hans-core | ffmwu-hans-core | ||
<source lang='xml'> | <source lang='xml'> | ||
| Zeile 1.541: | Zeile 1.641: | ||
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> | ||
</controller> | </controller> | ||
| − | <interface type=' | + | <interface type='bridge'> |
| − | <mac address='52:54:00: | + | <mac address='52:54:00:93:ba:bb'/> |
| − | <source network='ovs- | + | <source network='ovs-sw05' portgroup='vlan-all' bridge='br-sw05'/> |
| − | + | <vlan trunk='yes'> | |
| − | + | <tag id='5'/> | |
| − | + | <tag id='513'/> | |
| − | + | <tag id='514'/> | |
| − | + | <tag id='515'/> | |
| − | + | <tag id='516'/> | |
| − | + | <tag id='517'/> | |
| − | + | <tag id='518'/> | |
| − | + | </vlan> | |
| − | + | <virtualport type='openvswitch'> | |
| − | + | <parameters interfaceid='55521f0b-3c6e-4855-8fb2-7fa265da3ac2'/> | |
| − | + | </virtualport> | |
| − | + | <target dev='vcoresw05'/> | |
| − | |||
| − | |||
| − | <target dev=' | ||
<model type='virtio'/> | <model type='virtio'/> | ||
<alias name='net0'/> | <alias name='net0'/> | ||
| − | <address type='pci' domain='0x0000' bus='0x00' slot=' | + | <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/> |
</interface> | </interface> | ||
| − | <interface type=' | + | <interface type='bridge'> |
| − | <mac address='52:54:00: | + | <mac address='52:54:00:f7:8b:a8'/> |
| − | + | <source bridge='br-gluonb2b'/> | |
| − | + | <target dev='vcoreb2b'/> | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | <target dev=' | ||
<model type='virtio'/> | <model type='virtio'/> | ||
<alias name='net1'/> | <alias name='net1'/> | ||
| − | <address type='pci' domain='0x0000' bus='0x00' slot=' | + | <address type='pci' domain='0x0000' bus='0x00' slot='0x0c' function='0x0'/> |
</interface> | </interface> | ||
| − | <interface type=' | + | <interface type='bridge'> |
| − | <mac address='52:54:00: | + | <mac address='52:54:00:3c:50:59'/> |
| − | <source network='ovs- | + | <source network='ovs-sw02' portgroup='vlan-all' bridge='br-sw02'/> |
| − | < | + | <vlan trunk='yes'> |
| − | < | + | <tag id='5'/> |
| − | < | + | <tag id='301'/> |
| − | + | <tag id='303'/> | |
| − | + | <tag id='317'/> | |
| − | + | <tag id='318'/> | |
| − | + | <tag id='319'/> | |
| − | + | <tag id='320'/> | |
| − | + | <tag id='321'/> | |
| − | + | <tag id='322'/> | |
| − | + | </vlan> | |
| − | + | <virtualport type='openvswitch'> | |
| − | + | <parameters interfaceid='959931f7-7eb8-46a9-9c8b-c100e4c9fea8'/> | |
| − | + | </virtualport> | |
| − | + | <target dev='vcoresw02'/> | |
| − | <target dev=' | ||
<model type='virtio'/> | <model type='virtio'/> | ||
<alias name='net2'/> | <alias name='net2'/> | ||
| − | <address type='pci' domain='0x0000' bus='0x00' slot=' | + | <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> |
</interface> | </interface> | ||
<serial type='pty'> | <serial type='pty'> | ||
| Zeile 1.735: | Zeile 1.822: | ||
</controller> | </controller> | ||
<interface type='bridge'> | <interface type='bridge'> | ||
| − | <mac address='52:54:00: | + | <mac address='52:54:00:fd:c1:33'/> |
| + | <source network='ovs-sw05' portgroup='vlan-6' bridge='br-sw05'/> | ||
| + | <vlan> | ||
| + | <tag id='6'/> | ||
| + | </vlan> | ||
| + | <virtualport type='openvswitch'> | ||
| + | <parameters interfaceid='789cf088-db1a-47a5-9cc9-334d1366546d'/> | ||
| + | </virtualport> | ||
| + | <target dev='vuplsw05'/> | ||
| + | <model type='virtio'/> | ||
| + | <alias name='net0'/> | ||
| + | <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> | ||
| + | </interface> | ||
| + | <interface type='bridge'> | ||
| + | <mac address='52:54:00:f5:1e:09'/> | ||
<source bridge='br-gluonb2b'/> | <source bridge='br-gluonb2b'/> | ||
| − | <target dev=' | + | <target dev='vuplb2b'/> |
<model type='virtio'/> | <model type='virtio'/> | ||
| − | <alias name=' | + | <alias name='net1'/> |
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> | ||
</interface> | </interface> | ||
| − | <interface type=' | + | <interface type='bridge'> |
| − | <mac address='52:54:00: | + | <mac address='52:54:00:e7:71:af'/> |
| − | <source network='ovs- | + | <source network='ovs-sw01' portgroup='vlan-all' bridge='br-sw01'/> |
| − | < | + | <vlan trunk='yes'> |
| − | < | + | <tag id='4'/> |
| − | + | </vlan> | |
| − | + | <virtualport type='openvswitch'> | |
| − | + | <parameters interfaceid='5d824f23-d60c-443f-9c00-429f0bdd7943'/> | |
| − | + | </virtualport> | |
| − | <target dev=' | + | <target dev='vuplsw01'/> |
<model type='virtio'/> | <model type='virtio'/> | ||
| − | <alias name=' | + | <alias name='net2'/> |
| − | <address type='pci' domain='0x0000' bus='0x00' slot=' | + | <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/> |
</interface> | </interface> | ||
<serial type='pty'> | <serial type='pty'> | ||
| Zeile 1.804: | Zeile 1.905: | ||
</seclabel> | </seclabel> | ||
</domain> | </domain> | ||
| + | </source> | ||
| + | |||
| + | ====Open vSwitch Konfiguration==== | ||
| + | Die Konfiguration der Open vSwitch Switche sieht dann wie folgt aus: | ||
| + | <source lang='text'> | ||
| + | root@HanS-Server:~# ovs-vsctl show | ||
| + | cd407941-c84e-484c-9b7c-426050da8e74 | ||
| + | Bridge "br-sw05" | ||
| + | Port "vcoresw05" | ||
| + | trunks: [5, 513, 514, 515, 516, 517, 518] | ||
| + | Interface "vcoresw05" | ||
| + | Port "ens1f1" | ||
| + | Interface "ens1f1" | ||
| + | Port "vuplsw05" | ||
| + | tag: 6 | ||
| + | Interface "vuplsw05" | ||
| + | Port "br-sw05" | ||
| + | Interface "br-sw05" | ||
| + | type: internal | ||
| + | Bridge "br-sw02" | ||
| + | Port "br-sw02" | ||
| + | Interface "br-sw02" | ||
| + | type: internal | ||
| + | Port "vcoresw02" | ||
| + | trunks: [5, 301, 303, 317, 318, 319, 320, 321, 322] | ||
| + | Interface "vcoresw02" | ||
| + | Port "ens1f0" | ||
| + | Interface "ens1f0" | ||
| + | Bridge "br-sw01" | ||
| + | Port "vuplsw01" | ||
| + | trunks: [4] | ||
| + | Interface "vuplsw01" | ||
| + | Port "br-sw01" | ||
| + | Interface "br-sw01" | ||
| + | type: internal | ||
| + | Port "enp2s0f1" | ||
| + | Interface "enp2s0f1" | ||
| + | ovs_version: "2.5.0" | ||
| + | |||
| + | root@HanS-Server:~# ovs-vsctl list-br | ||
| + | br-sw01 | ||
| + | br-sw02 | ||
| + | br-sw05 | ||
| + | |||
| + | root@HanS-Server:~# ovs-vsctl list-ifaces br-sw01 | ||
| + | enp2s0f1 | ||
| + | vuplsw01 | ||
| + | |||
| + | root@HanS-Server:~# ovs-vsctl list-ifaces br-sw02 | ||
| + | ens1f0 | ||
| + | vcoresw02 | ||
| + | |||
| + | root@HanS-Server:~# ovs-vsctl list-ifaces br-sw05 | ||
| + | ens1f1 | ||
| + | vcoresw05 | ||
| + | vuplsw05 | ||
</source> | </source> | ||
Aktuelle Version vom 26. November 2016, 22:48 Uhr
Dies ist die Übersichtsseite des Projektes Hans-Bredow-Straße. Möchtest Du Dich hier beteiligen, so sprich einfach den Verantwortlichen der Gruppe an. Möchtest Du etwas zu dieser Seite beitragen, kannst Du das auf der Diskussionsseite tun. Die Übersichtsseite selbst ist den Mitgliedern der Gruppe vorbehalten.
Allgemeines
| Name | Hans-Bredow-Straße |
| Thema | Versorgung des ehemaligen Gerling Verwaltungssitzes in Wiesbaden-Südost, Hans-Bredow-Straße 2 mit Freifunk. Dort sind bis zu 600 Geflüchtete untergebracht. |
| Verantwortlicher | GÜ-NN1 |
| Mitglieder | Axel, Benito, GÜ-NN1, Peter, Volker, Kokel |
| Planungs-Mailing-Liste | Hans |
| Berichtsturnus | auf ML |
| Beginn | 2016-02-02 |
| Ende | ? |
| Ergebnisse |
aktueller Stand
- 2016-11-22 | 01 Pers. X 01 h | Server neustarten, 1x WR1043ND installiert
- 2016-11-15 | 01 Pers. X 02 h | Server neustarten, 2x CPEs + 1x 841er konfiguriert
- 2016-11-11 | 01 Pers. X 01 h | Server neustarten, Gespraeche, Router umstecken
- 2016-10-10 | 01 Pers. X 02 h | Wartung; Config-Reset einer CPE; Umpatchung einer CPE
- 2016-09-11 | 01 Pers. X 02 h | Inbetriebnahme Switche 1-3/Technikraum EG; Ausrichtung PBE-5AC-400 in Richtung Opelbad; Einweisung Hausmeister umpatchen CPEs
- 2016-08-25 | 02 Pers. X 02 h | Ausrichtung NB5-AC zu Weilstraße
- 2016-08-12 | 01 Pers. X 01 h | Telekomrouter konfiguriert
- 2016-07-10 | 02 Pers. X 04 h | 4 Kabel gecrimpt, Server + Gluon-VM konfiguriert
- 2016-07-06 | 02 Pers. X 03 h | 2 Kabel gecrimpt, 2 Switche konfiguriert, 2 PBE-5AC-400 ausgerichtet + konfiguriert
- 2016-05-15 | 01 Pers. X 05 h | Switche/USV in Schrank montiert
- 2016-05-14 | 02 Pers. X 08 h | Installation vom Server, Switche/USV in Schrank montiert
- 2016-05-11 | 02 Pers. X 02 h | Einlagerung der bestellten Hardware zur Weiternutzung
- 2016-03-03 | 04 Pers. X 03 h | Ausmessung eines Stockwerkes und Bedarfsfestlegung (Bestellung Hardware)
- 2016-02-02 | 03 Pers. X 01 h | Vor-Ort-Termin
Lokationsbeschreibung
HBS hat 8 Stockwerke, ein längliches Gebäude, wo vom mittigen Flur rechts und links die Zimmer abgehen. Außerdem gibt es einen zweistöckigen Anbau, der im rechten Winkel am achtstöckigen Teil angebaut ist. Dort im UG ist die Kantine / Aufenthaltsraum.
Befreifunkt sollen alle 8 Stockwerke, die 2 Stockwerke des Anbaus und der Aufenthaltbereich.
Bing-Standort: http://binged.it/1QbZhTd
Vom Dach hat man einen guten Rundumblick auf viele Standorte in der Stadt und bis nach Mainz. Fotos: http://photos.wiesbaden.freifunk.net/index.php?/category/30
Das 2., 3. und 4. OG soll am 15.2. in Betrieb gehen, der Rest später. Belegung werden 500 - 600 Personen sein.
An einen zentralen Punkt im Haus käme ein PoE-fähiger Switch. Von dort bekommen wir LAN an die nötigen Routerplätze gelegt. Auf das Dach wird ebenfalls LAN gelegt, zwecks Anbindung BB.--Axel (Diskussion) 22:42, 3. Feb. 2016 (CET)
Technik
Folgende Richtlinien sollen gelten:
- VLAN 5 = Freifunk Client Netz
- VLANs 100-121/201-222/301-316/401-422/501-512 = Untagged VLANs für CPE210/TL-WR841N
- VLANs 11-22 = Tagged VLANs für Richtfunk
- CPE210 = Mesh-On-LAN/-WAN aktiviert
- TL-WR841N = Mesh-On-LAN/-WAN/-WiFi aktiviert
Port-Legende: "X YZ YZ .. "
X: Port-Bezeichnung (Gerät, nicht Software intern)
Y: VLAN-ID
Z: U = Untagged, T = Tagged
WLAN-Legende: "CX/MX"
C: Client-WLAN
M: Mesh-WLAN
X: 0 = deaktiviert; >0 = WLAN-Kanal (+ aktiviert)
End-Geräte Knoten
Client-WLAN sind alle auf 2,4GHz eingestellt
| Lfd. Nr. | Knotenname | Standort | Routertyp | Firmware | 2,4GHz | IPv4 | Kommentar | In Betrieb |
|---|---|---|---|---|---|---|---|---|
| 01. | HanS-EG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.1 | nein | ||
| 02. | HanS-EG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.2 | nein | ||
| 03. | HanS-EG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.3 | ja | ||
| 04. | HanS-EG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.4 | ja | ||
| 05. | HanS-1.OG-1 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.5 | ja | ||
| 06. | HanS-1.OG-2 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.6 | ja | ||
| 07. | HanS-1.OG-3 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.7 | ja | ||
| 08. | HanS-1.OG-4 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.8 | ja | ||
| 09. | HanS-2.OG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.9 | ja | ||
| 10. | HanS-2.OG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.10 | nein | ||
| 11. | HanS-2.OG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.11 | nein | ||
| 12. | HanS-2.OG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.12 | nein | ||
| 13. | HanS-3.OG-1 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.13 | ja | ||
| 14. | HanS-3.OG-2 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.14 | nein | ||
| 15. | HanS-3.OG-3 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.15 | ja | ||
| 16. | HanS-3.OG-4 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.16 | ja | ||
| 17. | HanS-4.OG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.17 | nein | ||
| 18. | HanS-4.OG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.18 | ja | ||
| 19. | HanS-4.OG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.19 | ja | ||
| 20. | HanS-4.OG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.20 | ja | ||
| 21. | HanS-5.OG-1 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.21 | ja | ||
| 22. | HanS-5.OG-2 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.22 | ja | ||
| 23. | HanS-5.OG-3 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.23 | nein | ||
| 24. | HanS-5.OG-4 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.24 | ja | ||
| 25. | HanS-6.OG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.25 | ja | ||
| 26. | HanS-6.OG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.26 | ja | ||
| 27. | HanS-6.OG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.27 | ja | ||
| 28. | HanS-6.OG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.28 | nein | ||
| 29. | HanS-7.OG-1 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.29 | ja | ||
| 30. | HanS-7.OG-2 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.30 | nein | ||
| 31. | HanS-7.OG-3 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.31 | ja | ||
| 32. | HanS-7.OG-4 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.32 | nein | ||
| 33. | HanS-8.OG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.33 | nein | ||
| 34. | HanS-8.OG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.34 | ja | ||
| 35. | HanS-8.OG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.35 | ja | ||
| 36. | HanS-8.OG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.36 | ja | ||
| 37. | HanS-Flur-EG-1 | CPE210 v1.1 | Gluon | C01/M01 | Mesh mit HanS-Flur-EG-1.1 | ja | ||
| 38. | HanS-Flur-EG-1.1 | TL-WR841N | Gluon | C01/M01 | Mesh mit HanS-Flur-EG-1 | nein | ||
| 39. | HanS-Flur-EG-2 | CPE210 v1.1 | Gluon | C05/M05 | Mesh mit HanS-Flur-EG-2.1 | ja | ||
| 40. | HanS-Flur-EG-2.1 | TL-WR841N | Gluon | C05/M05 | Mesh mit HanS-Flur-EG-2 | nein | ||
| 41. | HanS-Flur-1.OG-1 | CPE210 v1.1 | Gluon | C09/M09 | Mesh mit HanS-Flur-1.OG-1.1 | nein | ||
| 42. | HanS-Flur-1.OG-1.1 | TL-WR841N | Gluon | C09/M09 | Mesh mit HanS-Flur-1.OG-1 | nein | ||
| 43. | HanS-Flur-1.OG-2 | CPE210 v1.1 | Gluon | C13/M13 | Mesh mit HanS-Flur-1.OG-2.1 | nein | ||
| 44. | HanS-Flur-1.OG-2.1 | TL-WR841N | Gluon | C13/M13 | Mesh mit HanS-Flur-1.OG-2 | nein |
WLAN-Kanäle bei IEEE 802.11g und 802.11n (2,4 GHz überlappungsfrei bei 20 MHz Kanalbreite)
Quelle: www.elektronik-kompendium.de
Richtfunk
| Lfd. Nr. | Knotenname | Standort | Routertyp | nach | Kommentar |
|---|---|---|---|---|---|
| 01. | ffmwu-hans-fw1 | PowerBeam 5AC 400 | FW1 | AP PtP ffmwu-hans-fw1-11ac | |
| 02. | ffmwu-hans-opel | PowerBeam 5AC 400 | Opel | AP PtP ffmwu-hans-opel-11ac | |
| 03. | ffmwu-Accesspoint-client-Standort | PowerBeam 5AC 400 | Point-to-Point | ||
| 04. | ffmwu-Accesspoint-client-Standort | PowerBeam 5AC 400 | Point-to-Point | ||
| 05. | ffmwu-Accesspoint-client-Standort | NanoBeam 5AC 19 | Point-to-Point | ||
| 06. | ffmwu-Accesspoint-client-Standort | NanoBeam 5AC 19 | Point-to-Point | ||
| 07. | ffmwu-Accesspoint-client-Standort | NanoBeam 5AC 19 | Point-to-Point | ||
| 08. | ffmwu-Accesspoint-client-Standort | NanoBeam 5AC 19 | Point-to-Point | ||
| 09. | ffmwu-hans-11ac-116 | LiteBeam 5AC 16 120 | Luisenstraße | Point-to-Multipoint | |
| 10. | ffmwu-hans-weil | NanoBeam 5AC 19 | Weil | Point-to-Point |
Switche
Portbelegung der 5 Ubiquiti EdgeSwitch ES-24-250W, die in den Racks verbaut sind
HanS-EG-Switch-1
| Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
|---|---|---|---|---|
| 1 | 4 | untagged | WLAN EG 1.1 | 24V passive |
| 2 | 4 | untagged | WLAN EG 1.2 | 24V passive |
| 3 | 4 | untagged | WLAN EG 2.1 | 24V passive |
| 4 | 4 | untagged | WLAN EG 2.2 | 24V passive |
| 5 | 4 | untagged | WLAN EG 3.1 | 24V passive |
| 6 | 4 | untagged | WLAN EG 3.2 | 24V passive |
| 7 | 4 | untagged | WLAN EG 4.1 | 24V passive |
| 8 | 4 | untagged | WLAN EG 4.2 | 24V passive |
| 9 | 4 | untagged | WLAN 1.OG 1.1 | 24V passive |
| 10 | 4 | untagged | WLAN 1.OG 1.2 | 24V passive |
| 11 | 4 | untagged | WLAN 1.OG 2.1 | 24V passive |
| 12 | 4 | untagged | WLAN 1.OG 2.2 | 24V passive |
| 13 | 4 | untagged | WLAN 1.OG 3.1 | 24V passive |
| 14 | 4 | untagged | WLAN 1.OG 3.2 | 24V passive |
| 15 | 4 | untagged | WLAN 1.OG 4.1 | 24V passive |
| 16 | 4 | untagged | WLAN 1.OG 4.2 | 24V passive |
| 17 | 4 | untagged | WLAN 2.OG 1.1 | 24V passive |
| 18 | 4 | untagged | WLAN 2.OG 1.2 | 24V passive |
| 19 | 4 | untagged | WLAN 2.OG 2.1 | 24V passive |
| 20 | 4 | untagged | WLAN 2.OG 2.2 | 24V passive |
| 21 | 4 | untagged | frei | 24V passive |
| 22 | 4 | untagged | RaspberryPi B+ | disabled |
| 23 | 4 | untagged | frei/Out-of-Band Mgmt | disabled |
| 24 | 4 | tagged | Panel-A Port 1/Server-Port enp2s0f1 | disabled |
HanS-EG-Switch-2
| Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
|---|---|---|---|---|
| 1 | 5 | untagged | WLAN 2.OG 3.1 | 24V passive |
| 2 | 5 | untagged | WLAN 2.OG 3.2 | 24V passive |
| 3 | 5 | untagged | WLAN 2.OG 4.1 | 24V passive |
| 4 | 5 | untagged | WLAN 2.OG 4.2 | 24V passive |
| 5 | 5 | untagged | WLAN 3.OG 1.1 | 24V passive |
| 6 | 5 | untagged | WLAN 3.OG 1.2 | 24V passive |
| 7 | 5 | untagged | WLAN 3.OG 2.1 | 24V passive |
| 8 | 5 | untagged | WLAN 3.OG 2.2 | 24V passive |
| 9 | 5 | untagged | WLAN 3.OG 3.1 | 24V passive |
| 10 | 5 | untagged | WLAN 3.OG 3.2 | 24V passive |
| 11 | 5 | untagged | WLAN 3.OG 4.1 | 24V passive |
| 12 | 5 | untagged | WLAN 3.OG 4.2 | 24V passive |
| 13 | 5 | untagged | WLAN 4.OG 1.1 | 24V passive |
| 14 | 5 | untagged | WLAN 4.OG 1.2 | 24V passive |
| 15 | 5 | untagged | WLAN 4.OG 2.1 | 24V passive |
| 16 | 5 | untagged | WLAN 4.OG 2.2 | 24V passive |
| 17 | 5 | untagged | WLAN 4.OG 3.1 | 24V passive |
| 18 | 5 | untagged | WLAN 4.OG 3.2 | 24V passive |
| 19 | 5 | untagged | WLAN 4.OG 4.1 | 24V passive |
| 20 | 5 | untagged | WLAN 4.OG 4.2 | 24V passive |
| 21 | 5 | untagged | frei | 24V passive |
| 22 | 5 | untagged | frei | 24V passive |
| 23 | 5,317-322 | tagged | ffmwu-hans-sw03 Port 24 | disabled |
| 24 | 5,301,303,317-322 | tagged | Panel-A Port 2/Server-Port ens1f0 | disabled |
HanS-EG-Switch-3
| Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
|---|---|---|---|---|
| 1 | 301 | untagged | WLAN Flur EG 1.1 | 24V passive |
| 2 | 5 | untagged | WLAN Flur EG 1.2 | 24V passive |
| 3 | 5 | 303 | WLAN Flur EG 2.1 | 24V passive |
| 4 | 5 | untagged | WLAN Flur EG 2.2 | 24V passive |
| 5 | 5 | untagged | WLAN Flur 1.OG 1.1 | 24V passive |
| 6 | 5 | untagged | WLAN Flur 1.OG 1.2 | 24V passive |
| 7 | 5 | untagged | WLAN Flur 1.OG 2.1 | 24V passive |
| 8 | 5 | untagged | WLAN Flur 1.OG 2.2 | 24V passive |
| 9 | 5 | untagged | frei | 24V passive |
| 10 | 5 | untagged | frei | 24V passive |
| 11 | 5 | untagged | frei | 24V passive |
| 12 | 5 | untagged | frei | 24V passive |
| 13 | 5 | untagged | frei | 24V passive |
| 14 | 5 | untagged | frei | 24V passive |
| 15 | 5 | untagged | frei | 24V passive |
| 16 | 5 | untagged | frei | 24V passive |
| 17 | 5,317 | tagged | Dach 4.1 | 24V passive |
| 18 | 5,318 | tagged | Dach 4.2 | 24V passive |
| 19 | 5,319 | tagged | Dach 5.1 | 24V passive |
| 20 | 5,320 | tagged | Dach 5.2 | 24V passive |
| 21 | 5,321 | tagged | Dach 6.1 | 24V passive |
| 22 | 5,322 | tagged | Dach 6.2 | 24V passive |
| 23 | 5 | untagged | Out-of-Band Mgmt | disabled |
| 24 | 5,301,303,317-322 | tagged | ffmwu-hans-sw02 Port 23 | disabled |
HanS-8OG-Switch-4
| Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
|---|---|---|---|---|
| 1 | 5 | untagged | WLAN 5.OG 1.1 | 24V passive |
| 2 | 5 | untagged | WLAN 5.OG 1.2 | 24V passive |
| 3 | 5 | untagged | WLAN 5.OG 2.1 | 24V passive |
| 4 | 5 | untagged | WLAN 5.OG 2.2 | 24V passive |
| 5 | 5 | untagged | WLAN 5.OG 3.1 | 24V passive |
| 6 | 5 | untagged | WLAN 5.OG 3.2 | 24V passive |
| 7 | 5 | untagged | WLAN 5.OG 4.1 | 24V passive |
| 8 | 5 | untagged | WLAN 5.OG 4.2 | 24V passive |
| 9 | 5 | untagged | WLAN 6.OG 1.1 | 24V passive |
| 10 | 5 | untagged | WLAN 6.OG 1.2 | 24V passive |
| 11 | 5 | untagged | WLAN 6.OG 2.1 | 24V passive |
| 12 | 5 | untagged | WLAN 6.OG 2.2 | 24V passive |
| 13 | 5 | untagged | WLAN 6.OG 3.1 | 24V passive |
| 14 | 5 | untagged | WLAN 6.OG 3.2 | 24V passive |
| 15 | 5 | untagged | WLAN 6.OG 4.1 | 24V passive |
| 16 | 5 | untagged | WLAN 6.OG 4.2 | 24V passive |
| 17 | 5 | untagged | WLAN 7.OG 1.1 | 24V passive |
| 18 | 5 | untagged | WLAN 7.OG 1.2 | 24V passive |
| 19 | 5 | untagged | WLAN 7.OG 2.1 | 24V passive |
| 20 | 5 | untagged | WLAN 7.OG 2.2 | 24V passive |
| 21 | 5 | untagged | TL-WR841N | disabled |
| 22 | 5 | untagged | frei | 24V passive |
| 23 | 5 | untagged | Out-of-Band Mgmt | disabled |
| 24 | 5 | tagged | ffmwu-hans-sw05 Port 23 | disabled |
HanS-8OG-Switch-5
| Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
|---|---|---|---|---|
| 1 | 5 | untagged | WLAN 7.OG 3.1 | 24V passive |
| 2 | 5 | untagged | WLAN 7.OG 3.2 | 24V passive |
| 3 | 5 | untagged | WLAN 7.OG 4.1 | 24V passive |
| 4 | 5 | untagged | WLAN 7.OG 4.2 | 24V passive |
| 5 | 5 | untagged | WLAN 8.OG 1.1 | 24V passive |
| 6 | 5 | untagged | WLAN 8.OG 1.2 | 24V passive |
| 7 | 5 | untagged | WLAN 8.OG 2.1 | 24V passive |
| 8 | 5 | untagged | WLAN 8.OG 2.2 | 24V passive |
| 9 | 5 | untagged | WLAN 8.OG 3.1 | 24V passive |
| 10 | 5 | untagged | WLAN 8.OG 3.2 | 24V passive |
| 11 | 5 | untagged | WLAN 8.OG 4.1 | 24V passive |
| 12 | 5 | untagged | WLAN 8.OG 4.2 | 24V passive |
| 13 | 5,513 | tagged | Dach 1.1 | 24V passive |
| 14 | 5,514 | tagged | Dach 1.2 | 24V passive |
| 15 | 5,515 | tagged | Dach 2.1 | 24V passive |
| 16 | 5,516 | tagged | Dach 2.2 | 24V passive |
| 17 | 5,517 | tagged | Dach 3.1 | 24V passive |
| 18 | 5,518 | tagged | Dach 3.2 | 24V passive |
| 19 | 5 | untagged | frei | 24V passive |
| 20 | 6 | tagged | Telekom Uplink | disabled |
| 21 | 5 | untagged | integrated Lights-Out (iLO) | disabled |
| 22 | 5 | untagged | Out-of-Band Mgmt | disabled |
| 23 | 5 | tagged | ffmwu-hans-sw04 Port 24 | disabled |
| 24 | 5,513-518 | tagged | Server-Port ens1f1 | disabled |
Server
- Modell:HP ProLiant DL380 G5 2x Xeon E5450
- Betriebssystem: Ubuntu 16.04 LTS
- Virtualisierung: KVM/QEMU
Netzwerk Config
Installation Open vSwitch
apt-get install openvswitch-switch openvswitch-common
Anlegen der Open vSwitch Bridges
ovs-vsctl add-br br-sw01
ovs-vsctl add-port br-sw01 enp2s0f1
ovs-vsctl add-br br-sw02
ovs-vsctl add-port br-sw02 ens1f0
ovs-vsctl add-br br-sw05
ovs-vsctl add-port br-sw05 ens1f1
/etc/network/interfaces
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto br-ffwi
iface br-ffwi inet static
bridge_ports enp2s0f0
bridge_stp no
bridge_fd 0
address 10.56.2.139
netmask 255.255.192.0
gateway 10.56.0.161
dns-nameservers 10.56.0.161 10.56.0.23 10.56.0.231
# Uplink ffmwu-hans-sw01
auto enp2s0f1
iface enp2s0f1 inet manual
# Uplink ffmwu-hans-sw02
auto ens1f0
iface ens1f0 inet manual
# Uplink ffmwu-hans-sw05
auto ens1f1
iface ens1f1 inet manual
# Inter-Bridge Backbone-VM <-> Uplink-VM
auto br-gluonb2b
iface br-gluonb2b inet manual
bridge_ports none
bridge_stp no
bridge_fd 0
Libvirt Networks
Man legt z.B. nach /tmp/ die Netzwerk Definitionen ab.
Datei /tmp/ovs-sw01.xml
<networkstatus>
<class_id bitmap='0-2'/>
<floor sum='0'/>
<network>
<name>ovs-sw01</name>
<uuid>e5992f9c-4dc1-4f7d-b4e5-6865e80c57f0</uuid>
<forward mode='bridge'/>
<bridge name='br-sw01'/>
<virtualport type='openvswitch'/>
<portgroup name='vlan-all' default='yes'>
<vlan trunk='yes'>
<tag id='4'/>
</vlan>
</portgroup>
</network>
</networkstatus>
Datei /tmp/ovs-sw02.xml
<networkstatus>
<class_id bitmap='0-2'/>
<floor sum='0'/>
<network>
<name>ovs-sw02</name>
<uuid>3ceae5b0-cdb4-4996-a0d0-be5f206ed3c2</uuid>
<forward mode='bridge'/>
<bridge name='br-sw02'/>
<virtualport type='openvswitch'/>
<portgroup name='vlan-all' default='yes'>
<vlan trunk='yes'>
<tag id='5'/>
<tag id='301'/>
<tag id='303'/>
<tag id='317'/>
<tag id='318'/>
<tag id='319'/>
<tag id='320'/>
<tag id='321'/>
<tag id='322'/>
</vlan>
</portgroup>
</network>
</networkstatus>
Datei /tmp/ovs-sw05.xml
<networkstatus>
<class_id bitmap='0-2'/>
<floor sum='0'/>
<network>
<name>ovs-sw05</name>
<uuid>c22babeb-8513-4b83-b4eb-ea9252500477</uuid>
<forward mode='bridge'/>
<bridge name='br-sw05'/>
<virtualport type='openvswitch'/>
<portgroup name='vlan-all' default='yes'>
<vlan trunk='yes'>
<tag id='5'/>
<tag id='513'/>
<tag id='514'/>
<tag id='515'/>
<tag id='516'/>
<tag id='517'/>
<tag id='518'/>
</vlan>
</portgroup>
<portgroup name='vlan-6'>
<vlan>
<tag id='6'/>
</vlan>
</network>
</networkstatus>
Netzwerk-Definitionen einlesen, starten und für den Autostart markieren.
virsh net-define /tmp/ovs-sw01.xml
virsh net-define /tmp/ovs-sw02.xml
virsh net-define /tmp/ovs-sw05.xml
virsh net-start ovs-sw01
virsh net-start ovs-sw02
virsh net-start ovs-sw05
virsh net-autostart ovs-sw01
virsh net-autostart ovs-sw02
virsh net-autostart ovs-sw05
Libvirt Domain Configs
Per default werden die Namen für virtuelle Netzwerkkarten der VMs auf dem Host dynamisch nach dem Schema vnetX vergeben. Für die OpenvSwitch Konfiguration benötigen wir aber persistente Interface-Namen. Diese werden in den <target dev=/> Direktiven gesetzt.
ffmwu-hans-core
<domain type='kvm' id='1'>
<name>ffmwu-hans-core</name>
<uuid>04502792-af13-41de-9073-a777ec8eea80</uuid>
<memory unit='KiB'>524288</memory>
<currentMemory unit='KiB'>524288</currentMemory>
<vcpu placement='static'>1</vcpu>
<resource>
<partition>/machine</partition>
</resource>
<os>
<type arch='x86_64' machine='pc-i440fx-wily'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
<apic/>
<vmport state='off'/>
</features>
<cpu mode='host-model'>
<model fallback='allow'/>
</cpu>
<clock offset='utc'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<pm>
<suspend-to-mem enabled='no'/>
<suspend-to-disk enabled='no'/>
</pm>
<devices>
<emulator>/usr/bin/kvm-spice</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/ffmwu-hans-core.img'/>
<backingStore/>
<target dev='vda' bus='virtio'/>
<alias name='virtio-disk0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
</disk>
<controller type='usb' index='0' model='ich9-ehci1'>
<alias name='usb'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<alias name='usb'/>
<master startport='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<alias name='usb'/>
<master startport='2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci3'>
<alias name='usb'/>
<master startport='4'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
</controller>
<controller type='pci' index='0' model='pci-root'>
<alias name='pci.0'/>
</controller>
<controller type='virtio-serial' index='0'>
<alias name='virtio-serial0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</controller>
<interface type='bridge'>
<mac address='52:54:00:93:ba:bb'/>
<source network='ovs-sw05' portgroup='vlan-all' bridge='br-sw05'/>
<vlan trunk='yes'>
<tag id='5'/>
<tag id='513'/>
<tag id='514'/>
<tag id='515'/>
<tag id='516'/>
<tag id='517'/>
<tag id='518'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='55521f0b-3c6e-4855-8fb2-7fa265da3ac2'/>
</virtualport>
<target dev='vcoresw05'/>
<model type='virtio'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:f7:8b:a8'/>
<source bridge='br-gluonb2b'/>
<target dev='vcoreb2b'/>
<model type='virtio'/>
<alias name='net1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0c' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:3c:50:59'/>
<source network='ovs-sw02' portgroup='vlan-all' bridge='br-sw02'/>
<vlan trunk='yes'>
<tag id='5'/>
<tag id='301'/>
<tag id='303'/>
<tag id='317'/>
<tag id='318'/>
<tag id='319'/>
<tag id='320'/>
<tag id='321'/>
<tag id='322'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='959931f7-7eb8-46a9-9c8b-c100e4c9fea8'/>
</virtualport>
<target dev='vcoresw02'/>
<model type='virtio'/>
<alias name='net2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</interface>
<serial type='pty'>
<source path='/dev/pts/0'/>
<target port='0'/>
<alias name='serial0'/>
</serial>
<console type='pty' tty='/dev/pts/0'>
<source path='/dev/pts/0'/>
<target type='serial' port='0'/>
<alias name='serial0'/>
</console>
<channel type='spicevmc'>
<target type='virtio' name='com.redhat.spice.0' state='disconnected'/>
<alias name='channel0'/>
<address type='virtio-serial' controller='0' bus='0' port='1'/>
</channel>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
<graphics type='spice' port='5900' autoport='yes' listen='127.0.0.1'>
<listen type='address' address='127.0.0.1' fromConfig='1'/>
</graphics>
<sound model='ich6'>
<alias name='sound0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</sound>
<video>
<model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1'/>
<alias name='video0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<redirdev bus='usb' type='spicevmc'>
<alias name='redir0'/>
</redirdev>
<redirdev bus='usb' type='spicevmc'>
<alias name='redir1'/>
</redirdev>
<watchdog model='i6300esb' action='reset'>
<alias name='watchdog0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</watchdog>
<memballoon model='virtio'>
<alias name='balloon0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
</memballoon>
</devices>
<seclabel type='dynamic' model='apparmor' relabel='yes'>
<label>libvirt-04502792-af13-41de-9073-a777ec8eea80</label>
<imagelabel>libvirt-04502792-af13-41de-9073-a777ec8eea80</imagelabel>
</seclabel>
</domain>
ffmwu-hans-uplink
<domain type='kvm' id='15'>
<name>ffmwu-hans-uplink</name>
<uuid>d768984d-d16e-400d-9a22-273f45bd9ab2</uuid>
<memory unit='KiB'>524288</memory>
<currentMemory unit='KiB'>524288</currentMemory>
<vcpu placement='static'>1</vcpu>
<resource>
<partition>/machine</partition>
</resource>
<os>
<type arch='x86_64' machine='pc-i440fx-wily'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
<apic/>
<vmport state='off'/>
</features>
<cpu mode='custom' match='exact'>
<model fallback='allow'>Nehalem</model>
</cpu>
<clock offset='utc'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<pm>
<suspend-to-mem enabled='no'/>
<suspend-to-disk enabled='no'/>
</pm>
<devices>
<emulator>/usr/bin/kvm-spice</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/ffmwu-hans-uplink.img'/>
<backingStore/>
<target dev='vda' bus='virtio'/>
<alias name='virtio-disk0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</disk>
<controller type='usb' index='0' model='ich9-ehci1'>
<alias name='usb'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<alias name='usb'/>
<master startport='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<alias name='usb'/>
<master startport='2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci3'>
<alias name='usb'/>
<master startport='4'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
</controller>
<controller type='pci' index='0' model='pci-root'>
<alias name='pci.0'/>
</controller>
<controller type='virtio-serial' index='0'>
<alias name='virtio-serial0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</controller>
<controller type='ide' index='0'>
<alias name='ide'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
<controller type='scsi' index='0'>
<alias name='scsi0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
</controller>
<interface type='bridge'>
<mac address='52:54:00:fd:c1:33'/>
<source network='ovs-sw05' portgroup='vlan-6' bridge='br-sw05'/>
<vlan>
<tag id='6'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='789cf088-db1a-47a5-9cc9-334d1366546d'/>
</virtualport>
<target dev='vuplsw05'/>
<model type='virtio'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:f5:1e:09'/>
<source bridge='br-gluonb2b'/>
<target dev='vuplb2b'/>
<model type='virtio'/>
<alias name='net1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:e7:71:af'/>
<source network='ovs-sw01' portgroup='vlan-all' bridge='br-sw01'/>
<vlan trunk='yes'>
<tag id='4'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='5d824f23-d60c-443f-9c00-429f0bdd7943'/>
</virtualport>
<target dev='vuplsw01'/>
<model type='virtio'/>
<alias name='net2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</interface>
<serial type='pty'>
<source path='/dev/pts/2'/>
<target port='0'/>
<alias name='serial0'/>
</serial>
<console type='pty' tty='/dev/pts/2'>
<source path='/dev/pts/2'/>
<target type='serial' port='0'/>
<alias name='serial0'/>
</console>
<channel type='spicevmc'>
<target type='virtio' name='com.redhat.spice.0' state='disconnected'/>
<alias name='channel0'/>
<address type='virtio-serial' controller='0' bus='0' port='1'/>
</channel>
<input type='tablet' bus='usb'>
<alias name='input0'/>
</input>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
<graphics type='spice' port='5901' autoport='yes' listen='127.0.0.1'>
<listen type='address' address='127.0.0.1' fromConfig='1'/>
</graphics>
<sound model='ich6'>
<alias name='sound0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</sound>
<video>
<model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1'/>
<alias name='video0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<redirdev bus='usb' type='spicevmc'>
<alias name='redir0'/>
</redirdev>
<redirdev bus='usb' type='spicevmc'>
<alias name='redir1'/>
</redirdev>
<memballoon model='virtio'>
<alias name='balloon0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
</memballoon>
</devices>
<seclabel type='dynamic' model='apparmor' relabel='yes'>
<label>libvirt-d768984d-d16e-400d-9a22-273f45bd9ab2</label>
<imagelabel>libvirt-d768984d-d16e-400d-9a22-273f45bd9ab2</imagelabel>
</seclabel>
</domain>
Open vSwitch Konfiguration
Die Konfiguration der Open vSwitch Switche sieht dann wie folgt aus:
root@HanS-Server:~# ovs-vsctl show
cd407941-c84e-484c-9b7c-426050da8e74
Bridge "br-sw05"
Port "vcoresw05"
trunks: [5, 513, 514, 515, 516, 517, 518]
Interface "vcoresw05"
Port "ens1f1"
Interface "ens1f1"
Port "vuplsw05"
tag: 6
Interface "vuplsw05"
Port "br-sw05"
Interface "br-sw05"
type: internal
Bridge "br-sw02"
Port "br-sw02"
Interface "br-sw02"
type: internal
Port "vcoresw02"
trunks: [5, 301, 303, 317, 318, 319, 320, 321, 322]
Interface "vcoresw02"
Port "ens1f0"
Interface "ens1f0"
Bridge "br-sw01"
Port "vuplsw01"
trunks: [4]
Interface "vuplsw01"
Port "br-sw01"
Interface "br-sw01"
type: internal
Port "enp2s0f1"
Interface "enp2s0f1"
ovs_version: "2.5.0"
root@HanS-Server:~# ovs-vsctl list-br
br-sw01
br-sw02
br-sw05
root@HanS-Server:~# ovs-vsctl list-ifaces br-sw01
enp2s0f1
vuplsw01
root@HanS-Server:~# ovs-vsctl list-ifaces br-sw02
ens1f0
vcoresw02
root@HanS-Server:~# ovs-vsctl list-ifaces br-sw05
ens1f1
vcoresw05
vuplsw05
VM-Watchdog-Script
Wenn die VM unerwartet crasht, kann diese per Remote nicht resettet werden. Dies machen wir automatisiert mit diesem Script, das in /usr/local/bin liegt.
#!/bin/bash
count=$( ping6 -c 5 fd56:b4dc:4b1e:0:5054:ff:fedd:cc9d | grep "bytes from" | wc -l )
if [ $count -eq 0 ]
then
logger "ffmwu-hans-core: Not available -> Reset VM"
virsh reset ffmwu-hans-core || virsh start ffmwu-hans-core
exit 0
else
logger "ffmwu-hans-core: Up and running -> nothing to do"
exit 0
fi
#!/bin/bash
count=$( ping6 -c 5 fd56:b4dc:4b1e:0:5054:ff:fe1c:8661 | grep "bytes from" | wc -l )
if [ $count -eq 0 ]
then
logger "ffmwu-hans-core: Not available -> Reset VM"
virsh reset ffmwu-hans-core || virsh start ffmwu-hans-core
exit 0
else
logger "ffmwu-hans-core: Up and running -> nothing to do"
exit 0
fi
Per cronjob wird es alle 20 Minuten ausgeführt
# m h dom mon dow command
*/20 * * * * /usr/local/bin/ffmwu-hans-core.sh
*/20 * * * * /usr/local/bin/ffmwu-hans-uplink.sh
Uplink
- via Richtfunk
- 16.000 DSL Telekom
Dokumente
Flucht- & Rettungspläne
Erdgeschoss
1. Obergeschoss
2. Obergeschoss
3. Obergeschoss
4. Obergeschoss
5. Obergeschoss
6. Obergeschoss
7. Obergeschoss
8. Obergeschoss
Planung
geplante Technik
- Hardwareplanung für das Projekt vom 03.03.2016
| Produkt | Anzahl | Einzelpreis | Gesamt | Kommentar | Händler |
|---|---|---|---|---|---|
| Haupthaus | |||||
| TP-Link CPE210 | 32 | 59,90 € | 1.916,80 € | Client AP | Völkner |
| Ubiquiti EdgeSwitch ES-24-250W | 5 | 416,70 € | 2.083,50 € | PoE-Switch | jacob |
| APC Smart-UPS 1000VA LCD RM 2U 230V | 2 | 466,60 € | 933,20 € | USV für 5 Switche + Server | jacob |
| LogiLink 19" Steckdosenleiste, 8-fach mit Schalter | 2 | 22,50 € | 45,00 € | Steckdosenleiste für Serverschrank | jacob |
| HP ProLiant DL380 G5 2x Xeon E5450 | 1 | 249,99 € | 249,99 € | Server | servershop24 |
| HP NC364T Quad Port Gigabit Server Adapter | 2 | 49,99 € | 99,98 € | 4x Port RJ45 Netzwerkkarte | servershop24 |
| HP 19" Rackmount-Schienen | 1 | 7,99 € | 7,99 € | 19" Rackmount-Schienen für Server | servershop24 |
| Wandhalterung - 25cm (L) x 25cm (H) | 32 | 5,49 € | 175,68 € | Halterung für TP-Link CPE210 | varia-store |
| Patchkabel | 200 | 1,99 € | 398,00 € | Patchkabel für TP-Link CPE210 | Völkner |
| Kleinmaterial | 1 | 100,00 € | 100,00 € | ||
| Zwischensumme | 6108,15 € | ||||
| Anbau | |||||
| TP-Link CPE210 | 8 | 59,90 € | 479,20 € | Client AP | Völkner |
| TP-Link WR841N | 5 | 15,94 € | 79,70 € | Client Mesh | Völkner |
| Wandhalterung - 25cm (L) x 25cm (H) | 8 | 5,49 € | 43,92 € | Halterung für TP-Link CPE210 | varia-store |
| Zwischensumme | 602,62 € | ||||
| Aufenthaltsraum | |||||
| TP-Link CPE210 | 4 | 59,90 € | 239,60 € | Client AP | Völkner |
| Wandhalterung - 25cm (L) x 25cm (H) | 4 | 5,49 € | 21,96 € | Halterung für TP-Link CPE210 | varia-store |
| Zwischensumme | 261,56 € | ||||
| Dach | |||||
| NBE-5AC-19 | 4 | 99,20 € | 396,80 € | Backbone | jacob |
| PBE-5AC-400 | 4 | 109,40 € | 437,60 € | Backbone | jacob |
| LBE-5AC-16-120 | 1 | 89,90 € | 89,90 € | Backbone | jacob |
| Zwischensumme | 924,30 € | ||||
| Gesamtsumme | 7896,63 € | ||||