Wiesbaden/Projekte/Hans Bredow Straße: Unterschied zwischen den Versionen
Kokel (Diskussion | Beiträge) |
Kokel (Diskussion | Beiträge) |
||
(27 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt) | |||
Zeile 9: | Zeile 9: | ||
| Verantwortlicher || GÜ-NN1 | | Verantwortlicher || GÜ-NN1 | ||
|- | |- | ||
− | | Mitglieder || Axel, Benito, GÜ-NN1, Peter, Volker | + | | Mitglieder || Axel, Benito, GÜ-NN1, Peter, Volker, Kokel |
|- | |- | ||
| Planungs-Mailing-Liste || [https://lists.freifunk-mwu.de/mailman/listinfo/hans Hans] | | Planungs-Mailing-Liste || [https://lists.freifunk-mwu.de/mailman/listinfo/hans Hans] | ||
Zeile 24: | Zeile 24: | ||
==aktueller Stand== | ==aktueller Stand== | ||
+ | * 2016-11-22 | 01 Pers. X 01 h | Server neustarten, 1x WR1043ND installiert | ||
+ | * 2016-11-15 | 01 Pers. X 02 h | Server neustarten, 2x CPEs + 1x 841er konfiguriert | ||
+ | * 2016-11-11 | 01 Pers. X 01 h | Server neustarten, Gespraeche, Router umstecken | ||
+ | * 2016-10-10 | 01 Pers. X 02 h | Wartung; Config-Reset einer CPE; Umpatchung einer CPE | ||
+ | * 2016-09-11 | 01 Pers. X 02 h | Inbetriebnahme Switche 1-3/Technikraum EG; Ausrichtung PBE-5AC-400 in Richtung Opelbad; Einweisung Hausmeister umpatchen CPEs | ||
* 2016-08-25 | 02 Pers. X 02 h | Ausrichtung NB5-AC zu Weilstraße | * 2016-08-25 | 02 Pers. X 02 h | Ausrichtung NB5-AC zu Weilstraße | ||
* 2016-08-12 | 01 Pers. X 01 h | Telekomrouter konfiguriert | * 2016-08-12 | 01 Pers. X 01 h | Telekomrouter konfiguriert | ||
Zeile 88: | Zeile 93: | ||
! Standort | ! Standort | ||
! Routertyp | ! Routertyp | ||
+ | ! Firmware | ||
! 2,4GHz | ! 2,4GHz | ||
+ | ! IPv4 | ||
! Kommentar | ! Kommentar | ||
+ | ! In Betrieb | ||
|- | |- | ||
| 01. | | 01. | ||
Zeile 95: | Zeile 103: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C01/M00 | | C01/M00 | ||
+ | | 10.56.8.1 | ||
| | | | ||
+ | | nein | ||
|- | |- | ||
| 02. | | 02. | ||
Zeile 102: | Zeile 113: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C05/M00 | | C05/M00 | ||
+ | | 10.56.8.2 | ||
| | | | ||
+ | | nein | ||
|- | |- | ||
| 03. | | 03. | ||
Zeile 109: | Zeile 123: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C09/M00 | | C09/M00 | ||
+ | | 10.56.8.3 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 04. | | 04. | ||
Zeile 116: | Zeile 133: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C13/M00 | | C13/M00 | ||
+ | | 10.56.8.4 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 05. | | 05. | ||
Zeile 123: | Zeile 143: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C13/M00 | | C13/M00 | ||
+ | | 10.56.8.5 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 06. | | 06. | ||
Zeile 130: | Zeile 153: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C09/M00 | | C09/M00 | ||
+ | | 10.56.8.6 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 07. | | 07. | ||
Zeile 137: | Zeile 163: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C05/M00 | | C05/M00 | ||
+ | | 10.56.8.7 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 08. | | 08. | ||
Zeile 144: | Zeile 173: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C01/M00 | | C01/M00 | ||
+ | | 10.56.8.8 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 09. | | 09. | ||
Zeile 151: | Zeile 183: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C01/M00 | | C01/M00 | ||
+ | | 10.56.8.9 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 10. | | 10. | ||
Zeile 158: | Zeile 193: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C05/M00 | | C05/M00 | ||
+ | | 10.56.8.10 | ||
| | | | ||
+ | | nein | ||
|- | |- | ||
| 11. | | 11. | ||
Zeile 165: | Zeile 203: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C09/M00 | | C09/M00 | ||
+ | | 10.56.8.11 | ||
| | | | ||
+ | | nein | ||
|- | |- | ||
| 12. | | 12. | ||
Zeile 172: | Zeile 213: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C13/M00 | | C13/M00 | ||
+ | | 10.56.8.12 | ||
| | | | ||
+ | | nein | ||
|- | |- | ||
| 13. | | 13. | ||
Zeile 179: | Zeile 223: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C13/M00 | | C13/M00 | ||
+ | | 10.56.8.13 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 14. | | 14. | ||
Zeile 186: | Zeile 233: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C09/M00 | | C09/M00 | ||
+ | | 10.56.8.14 | ||
| | | | ||
+ | | nein | ||
|- | |- | ||
| 15. | | 15. | ||
Zeile 193: | Zeile 243: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C05/M00 | | C05/M00 | ||
+ | | 10.56.8.15 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 16. | | 16. | ||
Zeile 200: | Zeile 253: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C01/M00 | | C01/M00 | ||
+ | | 10.56.8.16 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 17. | | 17. | ||
Zeile 207: | Zeile 263: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C01/M00 | | C01/M00 | ||
+ | | 10.56.8.17 | ||
| | | | ||
+ | | nein | ||
|- | |- | ||
| 18. | | 18. | ||
Zeile 214: | Zeile 273: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C05/M00 | | C05/M00 | ||
+ | | 10.56.8.18 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 19. | | 19. | ||
Zeile 221: | Zeile 283: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C09/M00 | | C09/M00 | ||
+ | | 10.56.8.19 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 20. | | 20. | ||
Zeile 228: | Zeile 293: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C13/M00 | | C13/M00 | ||
+ | | 10.56.8.20 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 21. | | 21. | ||
Zeile 235: | Zeile 303: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C13/M00 | | C13/M00 | ||
+ | | 10.56.8.21 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 22. | | 22. | ||
Zeile 242: | Zeile 313: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C09/M00 | | C09/M00 | ||
+ | | 10.56.8.22 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 23. | | 23. | ||
Zeile 249: | Zeile 323: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C05/M00 | | C05/M00 | ||
+ | | 10.56.8.23 | ||
| | | | ||
+ | | nein | ||
|- | |- | ||
| 24. | | 24. | ||
Zeile 256: | Zeile 333: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C01/M00 | | C01/M00 | ||
+ | | 10.56.8.24 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 25. | | 25. | ||
Zeile 263: | Zeile 343: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C01/M00 | | C01/M00 | ||
+ | | 10.56.8.25 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 26. | | 26. | ||
Zeile 270: | Zeile 353: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C05/M00 | | C05/M00 | ||
+ | | 10.56.8.26 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 27. | | 27. | ||
Zeile 277: | Zeile 363: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C09/M00 | | C09/M00 | ||
+ | | 10.56.8.27 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 28. | | 28. | ||
Zeile 284: | Zeile 373: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C13/M00 | | C13/M00 | ||
+ | | 10.56.8.28 | ||
| | | | ||
+ | | nein | ||
|- | |- | ||
| 29. | | 29. | ||
Zeile 291: | Zeile 383: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C13/M00 | | C13/M00 | ||
+ | | 10.56.8.29 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 30. | | 30. | ||
Zeile 298: | Zeile 393: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C09/M00 | | C09/M00 | ||
+ | | 10.56.8.30 | ||
| | | | ||
+ | | nein | ||
|- | |- | ||
| 31. | | 31. | ||
Zeile 305: | Zeile 403: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C05/M00 | | C05/M00 | ||
+ | | 10.56.8.31 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 32. | | 32. | ||
Zeile 312: | Zeile 413: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C01/M00 | | C01/M00 | ||
+ | | 10.56.8.32 | ||
| | | | ||
+ | | nein | ||
|- | |- | ||
| 33. | | 33. | ||
Zeile 319: | Zeile 423: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C01/M00 | | C01/M00 | ||
+ | | 10.56.8.33 | ||
| | | | ||
+ | | nein | ||
|- | |- | ||
| 34. | | 34. | ||
Zeile 326: | Zeile 433: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C05/M00 | | C05/M00 | ||
+ | | 10.56.8.34 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 35. | | 35. | ||
Zeile 333: | Zeile 443: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C09/M00 | | C09/M00 | ||
+ | | 10.56.8.35 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 36. | | 36. | ||
Zeile 340: | Zeile 453: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | PharOS | ||
| C13/M00 | | C13/M00 | ||
+ | | 10.56.8.36 | ||
| | | | ||
+ | | ja | ||
|- | |- | ||
| 37. | | 37. | ||
Zeile 347: | Zeile 463: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | Gluon | ||
| C01/M01 | | C01/M01 | ||
+ | | | ||
| Mesh mit HanS-Flur-EG-1.1 | | Mesh mit HanS-Flur-EG-1.1 | ||
+ | | ja | ||
|- | |- | ||
| 38. | | 38. | ||
Zeile 354: | Zeile 473: | ||
| | | | ||
| TL-WR841N | | TL-WR841N | ||
+ | | Gluon | ||
| C01/M01 | | C01/M01 | ||
+ | | | ||
| Mesh mit HanS-Flur-EG-1 | | Mesh mit HanS-Flur-EG-1 | ||
+ | | nein | ||
|- | |- | ||
| 39. | | 39. | ||
Zeile 361: | Zeile 483: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | Gluon | ||
| C05/M05 | | C05/M05 | ||
+ | | | ||
| Mesh mit HanS-Flur-EG-2.1 | | Mesh mit HanS-Flur-EG-2.1 | ||
+ | | ja | ||
|- | |- | ||
| 40. | | 40. | ||
Zeile 368: | Zeile 493: | ||
| | | | ||
| TL-WR841N | | TL-WR841N | ||
+ | | Gluon | ||
| C05/M05 | | C05/M05 | ||
+ | | | ||
| Mesh mit HanS-Flur-EG-2 | | Mesh mit HanS-Flur-EG-2 | ||
+ | | nein | ||
|- | |- | ||
| 41. | | 41. | ||
Zeile 375: | Zeile 503: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | Gluon | ||
| C09/M09 | | C09/M09 | ||
+ | | | ||
| Mesh mit HanS-Flur-1.OG-1.1 | | Mesh mit HanS-Flur-1.OG-1.1 | ||
+ | | nein | ||
|- | |- | ||
| 42. | | 42. | ||
Zeile 382: | Zeile 513: | ||
| | | | ||
| TL-WR841N | | TL-WR841N | ||
+ | | Gluon | ||
| C09/M09 | | C09/M09 | ||
+ | | | ||
| Mesh mit HanS-Flur-1.OG-1 | | Mesh mit HanS-Flur-1.OG-1 | ||
+ | | nein | ||
|- | |- | ||
| 43. | | 43. | ||
Zeile 389: | Zeile 523: | ||
| | | | ||
| CPE210 v1.1 | | CPE210 v1.1 | ||
+ | | Gluon | ||
| C13/M13 | | C13/M13 | ||
+ | | | ||
| Mesh mit HanS-Flur-1.OG-2.1 | | Mesh mit HanS-Flur-1.OG-2.1 | ||
+ | | nein | ||
|- | |- | ||
| 44. | | 44. | ||
Zeile 396: | Zeile 533: | ||
| | | | ||
| TL-WR841N | | TL-WR841N | ||
+ | | Gluon | ||
| C13/M13 | | C13/M13 | ||
+ | | | ||
| Mesh mit HanS-Flur-1.OG-2 | | Mesh mit HanS-Flur-1.OG-2 | ||
+ | | nein | ||
|} | |} | ||
Zeile 502: | Zeile 642: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
− | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
| 1 | | 1 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 1.1 | | WLAN EG 1.1 | ||
Zeile 512: | Zeile 652: | ||
|- | |- | ||
| 2 | | 2 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 1.2 | | WLAN EG 1.2 | ||
Zeile 518: | Zeile 658: | ||
|- | |- | ||
| 3 | | 3 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 2.1 | | WLAN EG 2.1 | ||
Zeile 524: | Zeile 664: | ||
|- | |- | ||
| 4 | | 4 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 2.2 | | WLAN EG 2.2 | ||
Zeile 530: | Zeile 670: | ||
|- | |- | ||
| 5 | | 5 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 3.1 | | WLAN EG 3.1 | ||
Zeile 536: | Zeile 676: | ||
|- | |- | ||
| 6 | | 6 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 3.2 | | WLAN EG 3.2 | ||
Zeile 542: | Zeile 682: | ||
|- | |- | ||
| 7 | | 7 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 4.1 | | WLAN EG 4.1 | ||
Zeile 548: | Zeile 688: | ||
|- | |- | ||
| 8 | | 8 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN EG 4.2 | | WLAN EG 4.2 | ||
Zeile 554: | Zeile 694: | ||
|- | |- | ||
| 9 | | 9 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 1.1 | | WLAN 1.OG 1.1 | ||
Zeile 560: | Zeile 700: | ||
|- | |- | ||
| 10 | | 10 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 1.2 | | WLAN 1.OG 1.2 | ||
Zeile 566: | Zeile 706: | ||
|- | |- | ||
| 11 | | 11 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 2.1 | | WLAN 1.OG 2.1 | ||
Zeile 572: | Zeile 712: | ||
|- | |- | ||
| 12 | | 12 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 2.2 | | WLAN 1.OG 2.2 | ||
Zeile 578: | Zeile 718: | ||
|- | |- | ||
| 13 | | 13 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 3.1 | | WLAN 1.OG 3.1 | ||
Zeile 584: | Zeile 724: | ||
|- | |- | ||
| 14 | | 14 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 3.2 | | WLAN 1.OG 3.2 | ||
Zeile 590: | Zeile 730: | ||
|- | |- | ||
| 15 | | 15 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 4.1 | | WLAN 1.OG 4.1 | ||
Zeile 596: | Zeile 736: | ||
|- | |- | ||
| 16 | | 16 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 1.OG 4.2 | | WLAN 1.OG 4.2 | ||
Zeile 602: | Zeile 742: | ||
|- | |- | ||
| 17 | | 17 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 2.OG 1.1 | | WLAN 2.OG 1.1 | ||
Zeile 608: | Zeile 748: | ||
|- | |- | ||
| 18 | | 18 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 2.OG 1.2 | | WLAN 2.OG 1.2 | ||
Zeile 614: | Zeile 754: | ||
|- | |- | ||
| 19 | | 19 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 2.OG 2.1 | | WLAN 2.OG 2.1 | ||
Zeile 620: | Zeile 760: | ||
|- | |- | ||
| 20 | | 20 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| WLAN 2.OG 2.2 | | WLAN 2.OG 2.2 | ||
Zeile 626: | Zeile 766: | ||
|- | |- | ||
| 21 | | 21 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
| 22 | | 22 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
| RaspberryPi B+ | | RaspberryPi B+ | ||
Zeile 638: | Zeile 778: | ||
|- | |- | ||
| 23 | | 23 | ||
− | | | + | | 4 |
| untagged | | untagged | ||
− | | Out-of-Band Mgmt | + | | frei/Out-of-Band Mgmt |
| disabled | | disabled | ||
|- | |- | ||
| 24 | | 24 | ||
− | | | + | | 4 |
| tagged | | tagged | ||
− | | Panel-A Port 1 | + | | Panel-A Port 1/Server-Port enp2s0f1 |
| disabled | | disabled | ||
|} | |} | ||
Zeile 657: | Zeile 797: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
− | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
Zeile 783: | Zeile 923: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
Zeile 789: | Zeile 929: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
Zeile 795: | Zeile 935: | ||
| 5,317-322 | | 5,317-322 | ||
| tagged | | tagged | ||
− | | ffmwu-hans-sw03 | + | | ffmwu-hans-sw03 Port 24 |
| disabled | | disabled | ||
|- | |- | ||
| 24 | | 24 | ||
− | | 5,317-322 | + | | 5,301,303,317-322 |
| tagged | | tagged | ||
− | | Panel-A Port 2 | + | | Panel-A Port 2/Server-Port ens1f0 |
| disabled | | disabled | ||
|} | |} | ||
Zeile 812: | Zeile 952: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
− | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
| 1 | | 1 | ||
− | | | + | | 301 |
| untagged | | untagged | ||
| WLAN Flur EG 1.1 | | WLAN Flur EG 1.1 | ||
Zeile 829: | Zeile 969: | ||
| 3 | | 3 | ||
| 5 | | 5 | ||
− | | | + | | 303 |
| WLAN Flur EG 2.1 | | WLAN Flur EG 2.1 | ||
| 24V passive | | 24V passive | ||
Zeile 866: | Zeile 1.006: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
Zeile 872: | Zeile 1.012: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
Zeile 878: | Zeile 1.018: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
Zeile 884: | Zeile 1.024: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
Zeile 890: | Zeile 1.030: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
Zeile 896: | Zeile 1.036: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
Zeile 902: | Zeile 1.042: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
Zeile 908: | Zeile 1.048: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
Zeile 954: | Zeile 1.094: | ||
|- | |- | ||
| 24 | | 24 | ||
− | | 5,317-322 | + | | 5,301,303,317-322 |
| tagged | | tagged | ||
− | | ffmwu-hans-sw02 | + | | ffmwu-hans-sw02 Port 23 |
| disabled | | disabled | ||
|} | |} | ||
Zeile 967: | Zeile 1.107: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
− | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
Zeile 1.099: | Zeile 1.239: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
Zeile 1.111: | Zeile 1.251: | ||
| 5 | | 5 | ||
| tagged | | tagged | ||
− | | | + | | ffmwu-hans-sw05 Port 23 |
| disabled | | disabled | ||
|} | |} | ||
Zeile 1.122: | Zeile 1.262: | ||
! VLANs | ! VLANs | ||
! Tag-Modi | ! Tag-Modi | ||
− | ! Gerät | + | ! Patch-Punkt/Gerät |
! PoE-Status | ! PoE-Status | ||
|- | |- | ||
Zeile 1.236: | Zeile 1.376: | ||
| 5 | | 5 | ||
| untagged | | untagged | ||
− | | | + | | frei |
| 24V passive | | 24V passive | ||
|- | |- | ||
Zeile 1.260: | Zeile 1.400: | ||
| 5 | | 5 | ||
| tagged | | tagged | ||
− | | | + | | ffmwu-hans-sw04 Port 24 |
| disabled | | disabled | ||
|- | |- | ||
Zeile 1.266: | Zeile 1.406: | ||
| 5,513-518 | | 5,513-518 | ||
| tagged | | tagged | ||
− | | Server-Port | + | | Server-Port ens1f1 |
| disabled | | disabled | ||
|} | |} | ||
Zeile 1.346: | Zeile 1.486: | ||
<portgroup name='vlan-all' default='yes'> | <portgroup name='vlan-all' default='yes'> | ||
<vlan trunk='yes'> | <vlan trunk='yes'> | ||
− | <tag id=' | + | <tag id='4'/> |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</vlan> | </vlan> | ||
</portgroup> | </portgroup> | ||
Zeile 1.373: | Zeile 1.507: | ||
<vlan trunk='yes'> | <vlan trunk='yes'> | ||
<tag id='5'/> | <tag id='5'/> | ||
+ | <tag id='301'/> | ||
+ | <tag id='303'/> | ||
+ | <tag id='317'/> | ||
+ | <tag id='318'/> | ||
+ | <tag id='319'/> | ||
+ | <tag id='320'/> | ||
+ | <tag id='321'/> | ||
+ | <tag id='322'/> | ||
</vlan> | </vlan> | ||
</portgroup> | </portgroup> | ||
Zeile 1.393: | Zeile 1.535: | ||
<vlan trunk='yes'> | <vlan trunk='yes'> | ||
<tag id='5'/> | <tag id='5'/> | ||
− | <tag id=' | + | <tag id='513'/> |
− | <tag id=' | + | <tag id='514'/> |
− | <tag id=' | + | <tag id='515'/> |
− | <tag id=' | + | <tag id='516'/> |
− | <tag id=' | + | <tag id='517'/> |
− | <tag id=' | + | <tag id='518'/> |
</vlan> | </vlan> | ||
</portgroup> | </portgroup> | ||
+ | <portgroup name='vlan-6'> | ||
+ | <vlan> | ||
+ | <tag id='6'/> | ||
+ | </vlan> | ||
</network> | </network> | ||
</networkstatus> | </networkstatus> | ||
Zeile 1.418: | Zeile 1.564: | ||
virsh net-autostart ovs-sw02 | virsh net-autostart ovs-sw02 | ||
virsh net-autostart ovs-sw05 | virsh net-autostart ovs-sw05 | ||
− | </source> | + | </source> |
====Libvirt Domain Configs==== | ====Libvirt Domain Configs==== | ||
+ | Per default werden die Namen für virtuelle Netzwerkkarten der VMs auf dem Host dynamisch nach dem Schema vnetX vergeben. | ||
+ | Für die OpenvSwitch Konfiguration benötigen wir aber persistente Interface-Namen. Diese werden in den <target dev=''/> Direktiven gesetzt. | ||
+ | |||
ffmwu-hans-core | ffmwu-hans-core | ||
<source lang='xml'> | <source lang='xml'> | ||
Zeile 1.492: | Zeile 1.641: | ||
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> | ||
</controller> | </controller> | ||
− | <interface type=' | + | <interface type='bridge'> |
− | <mac address='52:54:00: | + | <mac address='52:54:00:93:ba:bb'/> |
− | <source network='ovs- | + | <source network='ovs-sw05' portgroup='vlan-all' bridge='br-sw05'/> |
− | + | <vlan trunk='yes'> | |
− | + | <tag id='5'/> | |
− | + | <tag id='513'/> | |
− | + | <tag id='514'/> | |
− | + | <tag id='515'/> | |
− | + | <tag id='516'/> | |
− | + | <tag id='517'/> | |
− | + | <tag id='518'/> | |
− | + | </vlan> | |
− | + | <virtualport type='openvswitch'> | |
− | + | <parameters interfaceid='55521f0b-3c6e-4855-8fb2-7fa265da3ac2'/> | |
− | + | </virtualport> | |
− | + | <target dev='vcoresw05'/> | |
− | |||
− | |||
− | <target dev=' | ||
<model type='virtio'/> | <model type='virtio'/> | ||
<alias name='net0'/> | <alias name='net0'/> | ||
− | <address type='pci' domain='0x0000' bus='0x00' slot=' | + | <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/> |
</interface> | </interface> | ||
− | <interface type=' | + | <interface type='bridge'> |
− | <mac address='52:54:00: | + | <mac address='52:54:00:f7:8b:a8'/> |
− | + | <source bridge='br-gluonb2b'/> | |
− | + | <target dev='vcoreb2b'/> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | <target dev=' | ||
<model type='virtio'/> | <model type='virtio'/> | ||
<alias name='net1'/> | <alias name='net1'/> | ||
− | <address type='pci' domain='0x0000' bus='0x00' slot=' | + | <address type='pci' domain='0x0000' bus='0x00' slot='0x0c' function='0x0'/> |
</interface> | </interface> | ||
− | <interface type=' | + | <interface type='bridge'> |
− | <mac address='52:54:00: | + | <mac address='52:54:00:3c:50:59'/> |
− | <source network='ovs- | + | <source network='ovs-sw02' portgroup='vlan-all' bridge='br-sw02'/> |
− | < | + | <vlan trunk='yes'> |
− | < | + | <tag id='5'/> |
− | < | + | <tag id='301'/> |
− | + | <tag id='303'/> | |
− | + | <tag id='317'/> | |
− | + | <tag id='318'/> | |
− | + | <tag id='319'/> | |
− | + | <tag id='320'/> | |
− | + | <tag id='321'/> | |
− | + | <tag id='322'/> | |
− | + | </vlan> | |
− | + | <virtualport type='openvswitch'> | |
− | + | <parameters interfaceid='959931f7-7eb8-46a9-9c8b-c100e4c9fea8'/> | |
− | + | </virtualport> | |
− | + | <target dev='vcoresw02'/> | |
− | <target dev=' | ||
<model type='virtio'/> | <model type='virtio'/> | ||
<alias name='net2'/> | <alias name='net2'/> | ||
− | <address type='pci' domain='0x0000' bus='0x00' slot=' | + | <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> |
</interface> | </interface> | ||
<serial type='pty'> | <serial type='pty'> | ||
Zeile 1.686: | Zeile 1.822: | ||
</controller> | </controller> | ||
<interface type='bridge'> | <interface type='bridge'> | ||
− | <mac address='52:54:00: | + | <mac address='52:54:00:fd:c1:33'/> |
+ | <source network='ovs-sw05' portgroup='vlan-6' bridge='br-sw05'/> | ||
+ | <vlan> | ||
+ | <tag id='6'/> | ||
+ | </vlan> | ||
+ | <virtualport type='openvswitch'> | ||
+ | <parameters interfaceid='789cf088-db1a-47a5-9cc9-334d1366546d'/> | ||
+ | </virtualport> | ||
+ | <target dev='vuplsw05'/> | ||
+ | <model type='virtio'/> | ||
+ | <alias name='net0'/> | ||
+ | <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> | ||
+ | </interface> | ||
+ | <interface type='bridge'> | ||
+ | <mac address='52:54:00:f5:1e:09'/> | ||
<source bridge='br-gluonb2b'/> | <source bridge='br-gluonb2b'/> | ||
− | <target dev=' | + | <target dev='vuplb2b'/> |
<model type='virtio'/> | <model type='virtio'/> | ||
− | <alias name=' | + | <alias name='net1'/> |
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> | <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> | ||
</interface> | </interface> | ||
− | <interface type=' | + | <interface type='bridge'> |
− | <mac address='52:54:00: | + | <mac address='52:54:00:e7:71:af'/> |
− | <source network='ovs- | + | <source network='ovs-sw01' portgroup='vlan-all' bridge='br-sw01'/> |
− | < | + | <vlan trunk='yes'> |
− | < | + | <tag id='4'/> |
− | + | </vlan> | |
− | + | <virtualport type='openvswitch'> | |
− | + | <parameters interfaceid='5d824f23-d60c-443f-9c00-429f0bdd7943'/> | |
− | + | </virtualport> | |
− | <target dev=' | + | <target dev='vuplsw01'/> |
<model type='virtio'/> | <model type='virtio'/> | ||
− | <alias name=' | + | <alias name='net2'/> |
− | <address type='pci' domain='0x0000' bus='0x00' slot=' | + | <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/> |
</interface> | </interface> | ||
<serial type='pty'> | <serial type='pty'> | ||
Zeile 1.755: | Zeile 1.905: | ||
</seclabel> | </seclabel> | ||
</domain> | </domain> | ||
+ | </source> | ||
+ | |||
+ | ====Open vSwitch Konfiguration==== | ||
+ | Die Konfiguration der Open vSwitch Switche sieht dann wie folgt aus: | ||
+ | <source lang='text'> | ||
+ | root@HanS-Server:~# ovs-vsctl show | ||
+ | cd407941-c84e-484c-9b7c-426050da8e74 | ||
+ | Bridge "br-sw05" | ||
+ | Port "vcoresw05" | ||
+ | trunks: [5, 513, 514, 515, 516, 517, 518] | ||
+ | Interface "vcoresw05" | ||
+ | Port "ens1f1" | ||
+ | Interface "ens1f1" | ||
+ | Port "vuplsw05" | ||
+ | tag: 6 | ||
+ | Interface "vuplsw05" | ||
+ | Port "br-sw05" | ||
+ | Interface "br-sw05" | ||
+ | type: internal | ||
+ | Bridge "br-sw02" | ||
+ | Port "br-sw02" | ||
+ | Interface "br-sw02" | ||
+ | type: internal | ||
+ | Port "vcoresw02" | ||
+ | trunks: [5, 301, 303, 317, 318, 319, 320, 321, 322] | ||
+ | Interface "vcoresw02" | ||
+ | Port "ens1f0" | ||
+ | Interface "ens1f0" | ||
+ | Bridge "br-sw01" | ||
+ | Port "vuplsw01" | ||
+ | trunks: [4] | ||
+ | Interface "vuplsw01" | ||
+ | Port "br-sw01" | ||
+ | Interface "br-sw01" | ||
+ | type: internal | ||
+ | Port "enp2s0f1" | ||
+ | Interface "enp2s0f1" | ||
+ | ovs_version: "2.5.0" | ||
+ | |||
+ | root@HanS-Server:~# ovs-vsctl list-br | ||
+ | br-sw01 | ||
+ | br-sw02 | ||
+ | br-sw05 | ||
+ | |||
+ | root@HanS-Server:~# ovs-vsctl list-ifaces br-sw01 | ||
+ | enp2s0f1 | ||
+ | vuplsw01 | ||
+ | |||
+ | root@HanS-Server:~# ovs-vsctl list-ifaces br-sw02 | ||
+ | ens1f0 | ||
+ | vcoresw02 | ||
+ | |||
+ | root@HanS-Server:~# ovs-vsctl list-ifaces br-sw05 | ||
+ | ens1f1 | ||
+ | vcoresw05 | ||
+ | vuplsw05 | ||
</source> | </source> | ||
Aktuelle Version vom 26. November 2016, 22:48 Uhr
Allgemeines
Name | Hans-Bredow-Straße |
Thema | Versorgung des ehemaligen Gerling Verwaltungssitzes in Wiesbaden-Südost, Hans-Bredow-Straße 2 mit Freifunk. Dort sind bis zu 600 Geflüchtete untergebracht. |
Verantwortlicher | GÜ-NN1 |
Mitglieder | Axel, Benito, GÜ-NN1, Peter, Volker, Kokel |
Planungs-Mailing-Liste | Hans |
Berichtsturnus | auf ML |
Beginn | 2016-02-02 |
Ende | ? |
Ergebnisse |
aktueller Stand
- 2016-11-22 | 01 Pers. X 01 h | Server neustarten, 1x WR1043ND installiert
- 2016-11-15 | 01 Pers. X 02 h | Server neustarten, 2x CPEs + 1x 841er konfiguriert
- 2016-11-11 | 01 Pers. X 01 h | Server neustarten, Gespraeche, Router umstecken
- 2016-10-10 | 01 Pers. X 02 h | Wartung; Config-Reset einer CPE; Umpatchung einer CPE
- 2016-09-11 | 01 Pers. X 02 h | Inbetriebnahme Switche 1-3/Technikraum EG; Ausrichtung PBE-5AC-400 in Richtung Opelbad; Einweisung Hausmeister umpatchen CPEs
- 2016-08-25 | 02 Pers. X 02 h | Ausrichtung NB5-AC zu Weilstraße
- 2016-08-12 | 01 Pers. X 01 h | Telekomrouter konfiguriert
- 2016-07-10 | 02 Pers. X 04 h | 4 Kabel gecrimpt, Server + Gluon-VM konfiguriert
- 2016-07-06 | 02 Pers. X 03 h | 2 Kabel gecrimpt, 2 Switche konfiguriert, 2 PBE-5AC-400 ausgerichtet + konfiguriert
- 2016-05-15 | 01 Pers. X 05 h | Switche/USV in Schrank montiert
- 2016-05-14 | 02 Pers. X 08 h | Installation vom Server, Switche/USV in Schrank montiert
- 2016-05-11 | 02 Pers. X 02 h | Einlagerung der bestellten Hardware zur Weiternutzung
- 2016-03-03 | 04 Pers. X 03 h | Ausmessung eines Stockwerkes und Bedarfsfestlegung (Bestellung Hardware)
- 2016-02-02 | 03 Pers. X 01 h | Vor-Ort-Termin
Lokationsbeschreibung
HBS hat 8 Stockwerke, ein längliches Gebäude, wo vom mittigen Flur rechts und links die Zimmer abgehen. Außerdem gibt es einen zweistöckigen Anbau, der im rechten Winkel am achtstöckigen Teil angebaut ist. Dort im UG ist die Kantine / Aufenthaltsraum.
Befreifunkt sollen alle 8 Stockwerke, die 2 Stockwerke des Anbaus und der Aufenthaltbereich.
Bing-Standort: http://binged.it/1QbZhTd
Vom Dach hat man einen guten Rundumblick auf viele Standorte in der Stadt und bis nach Mainz. Fotos: http://photos.wiesbaden.freifunk.net/index.php?/category/30
Das 2., 3. und 4. OG soll am 15.2. in Betrieb gehen, der Rest später. Belegung werden 500 - 600 Personen sein.
An einen zentralen Punkt im Haus käme ein PoE-fähiger Switch. Von dort bekommen wir LAN an die nötigen Routerplätze gelegt. Auf das Dach wird ebenfalls LAN gelegt, zwecks Anbindung BB.--Axel (Diskussion) 22:42, 3. Feb. 2016 (CET)
Technik
Folgende Richtlinien sollen gelten:
- VLAN 5 = Freifunk Client Netz
- VLANs 100-121/201-222/301-316/401-422/501-512 = Untagged VLANs für CPE210/TL-WR841N
- VLANs 11-22 = Tagged VLANs für Richtfunk
- CPE210 = Mesh-On-LAN/-WAN aktiviert
- TL-WR841N = Mesh-On-LAN/-WAN/-WiFi aktiviert
Port-Legende: "X YZ YZ .. "
X: Port-Bezeichnung (Gerät, nicht Software intern)
Y: VLAN-ID
Z: U = Untagged, T = Tagged
WLAN-Legende: "CX/MX"
C: Client-WLAN
M: Mesh-WLAN
X: 0 = deaktiviert; >0 = WLAN-Kanal (+ aktiviert)
End-Geräte Knoten
Client-WLAN sind alle auf 2,4GHz eingestellt
Lfd. Nr. | Knotenname | Standort | Routertyp | Firmware | 2,4GHz | IPv4 | Kommentar | In Betrieb |
---|---|---|---|---|---|---|---|---|
01. | HanS-EG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.1 | nein | ||
02. | HanS-EG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.2 | nein | ||
03. | HanS-EG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.3 | ja | ||
04. | HanS-EG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.4 | ja | ||
05. | HanS-1.OG-1 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.5 | ja | ||
06. | HanS-1.OG-2 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.6 | ja | ||
07. | HanS-1.OG-3 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.7 | ja | ||
08. | HanS-1.OG-4 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.8 | ja | ||
09. | HanS-2.OG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.9 | ja | ||
10. | HanS-2.OG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.10 | nein | ||
11. | HanS-2.OG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.11 | nein | ||
12. | HanS-2.OG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.12 | nein | ||
13. | HanS-3.OG-1 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.13 | ja | ||
14. | HanS-3.OG-2 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.14 | nein | ||
15. | HanS-3.OG-3 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.15 | ja | ||
16. | HanS-3.OG-4 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.16 | ja | ||
17. | HanS-4.OG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.17 | nein | ||
18. | HanS-4.OG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.18 | ja | ||
19. | HanS-4.OG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.19 | ja | ||
20. | HanS-4.OG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.20 | ja | ||
21. | HanS-5.OG-1 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.21 | ja | ||
22. | HanS-5.OG-2 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.22 | ja | ||
23. | HanS-5.OG-3 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.23 | nein | ||
24. | HanS-5.OG-4 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.24 | ja | ||
25. | HanS-6.OG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.25 | ja | ||
26. | HanS-6.OG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.26 | ja | ||
27. | HanS-6.OG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.27 | ja | ||
28. | HanS-6.OG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.28 | nein | ||
29. | HanS-7.OG-1 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.29 | ja | ||
30. | HanS-7.OG-2 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.30 | nein | ||
31. | HanS-7.OG-3 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.31 | ja | ||
32. | HanS-7.OG-4 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.32 | nein | ||
33. | HanS-8.OG-1 | CPE210 v1.1 | PharOS | C01/M00 | 10.56.8.33 | nein | ||
34. | HanS-8.OG-2 | CPE210 v1.1 | PharOS | C05/M00 | 10.56.8.34 | ja | ||
35. | HanS-8.OG-3 | CPE210 v1.1 | PharOS | C09/M00 | 10.56.8.35 | ja | ||
36. | HanS-8.OG-4 | CPE210 v1.1 | PharOS | C13/M00 | 10.56.8.36 | ja | ||
37. | HanS-Flur-EG-1 | CPE210 v1.1 | Gluon | C01/M01 | Mesh mit HanS-Flur-EG-1.1 | ja | ||
38. | HanS-Flur-EG-1.1 | TL-WR841N | Gluon | C01/M01 | Mesh mit HanS-Flur-EG-1 | nein | ||
39. | HanS-Flur-EG-2 | CPE210 v1.1 | Gluon | C05/M05 | Mesh mit HanS-Flur-EG-2.1 | ja | ||
40. | HanS-Flur-EG-2.1 | TL-WR841N | Gluon | C05/M05 | Mesh mit HanS-Flur-EG-2 | nein | ||
41. | HanS-Flur-1.OG-1 | CPE210 v1.1 | Gluon | C09/M09 | Mesh mit HanS-Flur-1.OG-1.1 | nein | ||
42. | HanS-Flur-1.OG-1.1 | TL-WR841N | Gluon | C09/M09 | Mesh mit HanS-Flur-1.OG-1 | nein | ||
43. | HanS-Flur-1.OG-2 | CPE210 v1.1 | Gluon | C13/M13 | Mesh mit HanS-Flur-1.OG-2.1 | nein | ||
44. | HanS-Flur-1.OG-2.1 | TL-WR841N | Gluon | C13/M13 | Mesh mit HanS-Flur-1.OG-2 | nein |
WLAN-Kanäle bei IEEE 802.11g und 802.11n (2,4 GHz überlappungsfrei bei 20 MHz Kanalbreite)
Quelle: www.elektronik-kompendium.de
Richtfunk
Lfd. Nr. | Knotenname | Standort | Routertyp | nach | Kommentar |
---|---|---|---|---|---|
01. | ffmwu-hans-fw1 | PowerBeam 5AC 400 | FW1 | AP PtP ffmwu-hans-fw1-11ac | |
02. | ffmwu-hans-opel | PowerBeam 5AC 400 | Opel | AP PtP ffmwu-hans-opel-11ac | |
03. | ffmwu-Accesspoint-client-Standort | PowerBeam 5AC 400 | Point-to-Point | ||
04. | ffmwu-Accesspoint-client-Standort | PowerBeam 5AC 400 | Point-to-Point | ||
05. | ffmwu-Accesspoint-client-Standort | NanoBeam 5AC 19 | Point-to-Point | ||
06. | ffmwu-Accesspoint-client-Standort | NanoBeam 5AC 19 | Point-to-Point | ||
07. | ffmwu-Accesspoint-client-Standort | NanoBeam 5AC 19 | Point-to-Point | ||
08. | ffmwu-Accesspoint-client-Standort | NanoBeam 5AC 19 | Point-to-Point | ||
09. | ffmwu-hans-11ac-116 | LiteBeam 5AC 16 120 | Luisenstraße | Point-to-Multipoint | |
10. | ffmwu-hans-weil | NanoBeam 5AC 19 | Weil | Point-to-Point |
Switche
Portbelegung der 5 Ubiquiti EdgeSwitch ES-24-250W, die in den Racks verbaut sind
HanS-EG-Switch-1
Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
---|---|---|---|---|
1 | 4 | untagged | WLAN EG 1.1 | 24V passive |
2 | 4 | untagged | WLAN EG 1.2 | 24V passive |
3 | 4 | untagged | WLAN EG 2.1 | 24V passive |
4 | 4 | untagged | WLAN EG 2.2 | 24V passive |
5 | 4 | untagged | WLAN EG 3.1 | 24V passive |
6 | 4 | untagged | WLAN EG 3.2 | 24V passive |
7 | 4 | untagged | WLAN EG 4.1 | 24V passive |
8 | 4 | untagged | WLAN EG 4.2 | 24V passive |
9 | 4 | untagged | WLAN 1.OG 1.1 | 24V passive |
10 | 4 | untagged | WLAN 1.OG 1.2 | 24V passive |
11 | 4 | untagged | WLAN 1.OG 2.1 | 24V passive |
12 | 4 | untagged | WLAN 1.OG 2.2 | 24V passive |
13 | 4 | untagged | WLAN 1.OG 3.1 | 24V passive |
14 | 4 | untagged | WLAN 1.OG 3.2 | 24V passive |
15 | 4 | untagged | WLAN 1.OG 4.1 | 24V passive |
16 | 4 | untagged | WLAN 1.OG 4.2 | 24V passive |
17 | 4 | untagged | WLAN 2.OG 1.1 | 24V passive |
18 | 4 | untagged | WLAN 2.OG 1.2 | 24V passive |
19 | 4 | untagged | WLAN 2.OG 2.1 | 24V passive |
20 | 4 | untagged | WLAN 2.OG 2.2 | 24V passive |
21 | 4 | untagged | frei | 24V passive |
22 | 4 | untagged | RaspberryPi B+ | disabled |
23 | 4 | untagged | frei/Out-of-Band Mgmt | disabled |
24 | 4 | tagged | Panel-A Port 1/Server-Port enp2s0f1 | disabled |
HanS-EG-Switch-2
Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
---|---|---|---|---|
1 | 5 | untagged | WLAN 2.OG 3.1 | 24V passive |
2 | 5 | untagged | WLAN 2.OG 3.2 | 24V passive |
3 | 5 | untagged | WLAN 2.OG 4.1 | 24V passive |
4 | 5 | untagged | WLAN 2.OG 4.2 | 24V passive |
5 | 5 | untagged | WLAN 3.OG 1.1 | 24V passive |
6 | 5 | untagged | WLAN 3.OG 1.2 | 24V passive |
7 | 5 | untagged | WLAN 3.OG 2.1 | 24V passive |
8 | 5 | untagged | WLAN 3.OG 2.2 | 24V passive |
9 | 5 | untagged | WLAN 3.OG 3.1 | 24V passive |
10 | 5 | untagged | WLAN 3.OG 3.2 | 24V passive |
11 | 5 | untagged | WLAN 3.OG 4.1 | 24V passive |
12 | 5 | untagged | WLAN 3.OG 4.2 | 24V passive |
13 | 5 | untagged | WLAN 4.OG 1.1 | 24V passive |
14 | 5 | untagged | WLAN 4.OG 1.2 | 24V passive |
15 | 5 | untagged | WLAN 4.OG 2.1 | 24V passive |
16 | 5 | untagged | WLAN 4.OG 2.2 | 24V passive |
17 | 5 | untagged | WLAN 4.OG 3.1 | 24V passive |
18 | 5 | untagged | WLAN 4.OG 3.2 | 24V passive |
19 | 5 | untagged | WLAN 4.OG 4.1 | 24V passive |
20 | 5 | untagged | WLAN 4.OG 4.2 | 24V passive |
21 | 5 | untagged | frei | 24V passive |
22 | 5 | untagged | frei | 24V passive |
23 | 5,317-322 | tagged | ffmwu-hans-sw03 Port 24 | disabled |
24 | 5,301,303,317-322 | tagged | Panel-A Port 2/Server-Port ens1f0 | disabled |
HanS-EG-Switch-3
Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
---|---|---|---|---|
1 | 301 | untagged | WLAN Flur EG 1.1 | 24V passive |
2 | 5 | untagged | WLAN Flur EG 1.2 | 24V passive |
3 | 5 | 303 | WLAN Flur EG 2.1 | 24V passive |
4 | 5 | untagged | WLAN Flur EG 2.2 | 24V passive |
5 | 5 | untagged | WLAN Flur 1.OG 1.1 | 24V passive |
6 | 5 | untagged | WLAN Flur 1.OG 1.2 | 24V passive |
7 | 5 | untagged | WLAN Flur 1.OG 2.1 | 24V passive |
8 | 5 | untagged | WLAN Flur 1.OG 2.2 | 24V passive |
9 | 5 | untagged | frei | 24V passive |
10 | 5 | untagged | frei | 24V passive |
11 | 5 | untagged | frei | 24V passive |
12 | 5 | untagged | frei | 24V passive |
13 | 5 | untagged | frei | 24V passive |
14 | 5 | untagged | frei | 24V passive |
15 | 5 | untagged | frei | 24V passive |
16 | 5 | untagged | frei | 24V passive |
17 | 5,317 | tagged | Dach 4.1 | 24V passive |
18 | 5,318 | tagged | Dach 4.2 | 24V passive |
19 | 5,319 | tagged | Dach 5.1 | 24V passive |
20 | 5,320 | tagged | Dach 5.2 | 24V passive |
21 | 5,321 | tagged | Dach 6.1 | 24V passive |
22 | 5,322 | tagged | Dach 6.2 | 24V passive |
23 | 5 | untagged | Out-of-Band Mgmt | disabled |
24 | 5,301,303,317-322 | tagged | ffmwu-hans-sw02 Port 23 | disabled |
HanS-8OG-Switch-4
Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
---|---|---|---|---|
1 | 5 | untagged | WLAN 5.OG 1.1 | 24V passive |
2 | 5 | untagged | WLAN 5.OG 1.2 | 24V passive |
3 | 5 | untagged | WLAN 5.OG 2.1 | 24V passive |
4 | 5 | untagged | WLAN 5.OG 2.2 | 24V passive |
5 | 5 | untagged | WLAN 5.OG 3.1 | 24V passive |
6 | 5 | untagged | WLAN 5.OG 3.2 | 24V passive |
7 | 5 | untagged | WLAN 5.OG 4.1 | 24V passive |
8 | 5 | untagged | WLAN 5.OG 4.2 | 24V passive |
9 | 5 | untagged | WLAN 6.OG 1.1 | 24V passive |
10 | 5 | untagged | WLAN 6.OG 1.2 | 24V passive |
11 | 5 | untagged | WLAN 6.OG 2.1 | 24V passive |
12 | 5 | untagged | WLAN 6.OG 2.2 | 24V passive |
13 | 5 | untagged | WLAN 6.OG 3.1 | 24V passive |
14 | 5 | untagged | WLAN 6.OG 3.2 | 24V passive |
15 | 5 | untagged | WLAN 6.OG 4.1 | 24V passive |
16 | 5 | untagged | WLAN 6.OG 4.2 | 24V passive |
17 | 5 | untagged | WLAN 7.OG 1.1 | 24V passive |
18 | 5 | untagged | WLAN 7.OG 1.2 | 24V passive |
19 | 5 | untagged | WLAN 7.OG 2.1 | 24V passive |
20 | 5 | untagged | WLAN 7.OG 2.2 | 24V passive |
21 | 5 | untagged | TL-WR841N | disabled |
22 | 5 | untagged | frei | 24V passive |
23 | 5 | untagged | Out-of-Band Mgmt | disabled |
24 | 5 | tagged | ffmwu-hans-sw05 Port 23 | disabled |
HanS-8OG-Switch-5
Port | VLANs | Tag-Modi | Patch-Punkt/Gerät | PoE-Status |
---|---|---|---|---|
1 | 5 | untagged | WLAN 7.OG 3.1 | 24V passive |
2 | 5 | untagged | WLAN 7.OG 3.2 | 24V passive |
3 | 5 | untagged | WLAN 7.OG 4.1 | 24V passive |
4 | 5 | untagged | WLAN 7.OG 4.2 | 24V passive |
5 | 5 | untagged | WLAN 8.OG 1.1 | 24V passive |
6 | 5 | untagged | WLAN 8.OG 1.2 | 24V passive |
7 | 5 | untagged | WLAN 8.OG 2.1 | 24V passive |
8 | 5 | untagged | WLAN 8.OG 2.2 | 24V passive |
9 | 5 | untagged | WLAN 8.OG 3.1 | 24V passive |
10 | 5 | untagged | WLAN 8.OG 3.2 | 24V passive |
11 | 5 | untagged | WLAN 8.OG 4.1 | 24V passive |
12 | 5 | untagged | WLAN 8.OG 4.2 | 24V passive |
13 | 5,513 | tagged | Dach 1.1 | 24V passive |
14 | 5,514 | tagged | Dach 1.2 | 24V passive |
15 | 5,515 | tagged | Dach 2.1 | 24V passive |
16 | 5,516 | tagged | Dach 2.2 | 24V passive |
17 | 5,517 | tagged | Dach 3.1 | 24V passive |
18 | 5,518 | tagged | Dach 3.2 | 24V passive |
19 | 5 | untagged | frei | 24V passive |
20 | 6 | tagged | Telekom Uplink | disabled |
21 | 5 | untagged | integrated Lights-Out (iLO) | disabled |
22 | 5 | untagged | Out-of-Band Mgmt | disabled |
23 | 5 | tagged | ffmwu-hans-sw04 Port 24 | disabled |
24 | 5,513-518 | tagged | Server-Port ens1f1 | disabled |
Server
- Modell:HP ProLiant DL380 G5 2x Xeon E5450
- Betriebssystem: Ubuntu 16.04 LTS
- Virtualisierung: KVM/QEMU
Netzwerk Config
Installation Open vSwitch
apt-get install openvswitch-switch openvswitch-common
Anlegen der Open vSwitch Bridges
ovs-vsctl add-br br-sw01
ovs-vsctl add-port br-sw01 enp2s0f1
ovs-vsctl add-br br-sw02
ovs-vsctl add-port br-sw02 ens1f0
ovs-vsctl add-br br-sw05
ovs-vsctl add-port br-sw05 ens1f1
/etc/network/interfaces
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto br-ffwi
iface br-ffwi inet static
bridge_ports enp2s0f0
bridge_stp no
bridge_fd 0
address 10.56.2.139
netmask 255.255.192.0
gateway 10.56.0.161
dns-nameservers 10.56.0.161 10.56.0.23 10.56.0.231
# Uplink ffmwu-hans-sw01
auto enp2s0f1
iface enp2s0f1 inet manual
# Uplink ffmwu-hans-sw02
auto ens1f0
iface ens1f0 inet manual
# Uplink ffmwu-hans-sw05
auto ens1f1
iface ens1f1 inet manual
# Inter-Bridge Backbone-VM <-> Uplink-VM
auto br-gluonb2b
iface br-gluonb2b inet manual
bridge_ports none
bridge_stp no
bridge_fd 0
Libvirt Networks
Man legt z.B. nach /tmp/ die Netzwerk Definitionen ab.
Datei /tmp/ovs-sw01.xml
<networkstatus>
<class_id bitmap='0-2'/>
<floor sum='0'/>
<network>
<name>ovs-sw01</name>
<uuid>e5992f9c-4dc1-4f7d-b4e5-6865e80c57f0</uuid>
<forward mode='bridge'/>
<bridge name='br-sw01'/>
<virtualport type='openvswitch'/>
<portgroup name='vlan-all' default='yes'>
<vlan trunk='yes'>
<tag id='4'/>
</vlan>
</portgroup>
</network>
</networkstatus>
Datei /tmp/ovs-sw02.xml
<networkstatus>
<class_id bitmap='0-2'/>
<floor sum='0'/>
<network>
<name>ovs-sw02</name>
<uuid>3ceae5b0-cdb4-4996-a0d0-be5f206ed3c2</uuid>
<forward mode='bridge'/>
<bridge name='br-sw02'/>
<virtualport type='openvswitch'/>
<portgroup name='vlan-all' default='yes'>
<vlan trunk='yes'>
<tag id='5'/>
<tag id='301'/>
<tag id='303'/>
<tag id='317'/>
<tag id='318'/>
<tag id='319'/>
<tag id='320'/>
<tag id='321'/>
<tag id='322'/>
</vlan>
</portgroup>
</network>
</networkstatus>
Datei /tmp/ovs-sw05.xml
<networkstatus>
<class_id bitmap='0-2'/>
<floor sum='0'/>
<network>
<name>ovs-sw05</name>
<uuid>c22babeb-8513-4b83-b4eb-ea9252500477</uuid>
<forward mode='bridge'/>
<bridge name='br-sw05'/>
<virtualport type='openvswitch'/>
<portgroup name='vlan-all' default='yes'>
<vlan trunk='yes'>
<tag id='5'/>
<tag id='513'/>
<tag id='514'/>
<tag id='515'/>
<tag id='516'/>
<tag id='517'/>
<tag id='518'/>
</vlan>
</portgroup>
<portgroup name='vlan-6'>
<vlan>
<tag id='6'/>
</vlan>
</network>
</networkstatus>
Netzwerk-Definitionen einlesen, starten und für den Autostart markieren.
virsh net-define /tmp/ovs-sw01.xml
virsh net-define /tmp/ovs-sw02.xml
virsh net-define /tmp/ovs-sw05.xml
virsh net-start ovs-sw01
virsh net-start ovs-sw02
virsh net-start ovs-sw05
virsh net-autostart ovs-sw01
virsh net-autostart ovs-sw02
virsh net-autostart ovs-sw05
Libvirt Domain Configs
Per default werden die Namen für virtuelle Netzwerkkarten der VMs auf dem Host dynamisch nach dem Schema vnetX vergeben. Für die OpenvSwitch Konfiguration benötigen wir aber persistente Interface-Namen. Diese werden in den <target dev=/> Direktiven gesetzt.
ffmwu-hans-core
<domain type='kvm' id='1'>
<name>ffmwu-hans-core</name>
<uuid>04502792-af13-41de-9073-a777ec8eea80</uuid>
<memory unit='KiB'>524288</memory>
<currentMemory unit='KiB'>524288</currentMemory>
<vcpu placement='static'>1</vcpu>
<resource>
<partition>/machine</partition>
</resource>
<os>
<type arch='x86_64' machine='pc-i440fx-wily'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
<apic/>
<vmport state='off'/>
</features>
<cpu mode='host-model'>
<model fallback='allow'/>
</cpu>
<clock offset='utc'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<pm>
<suspend-to-mem enabled='no'/>
<suspend-to-disk enabled='no'/>
</pm>
<devices>
<emulator>/usr/bin/kvm-spice</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/ffmwu-hans-core.img'/>
<backingStore/>
<target dev='vda' bus='virtio'/>
<alias name='virtio-disk0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
</disk>
<controller type='usb' index='0' model='ich9-ehci1'>
<alias name='usb'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<alias name='usb'/>
<master startport='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<alias name='usb'/>
<master startport='2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci3'>
<alias name='usb'/>
<master startport='4'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
</controller>
<controller type='pci' index='0' model='pci-root'>
<alias name='pci.0'/>
</controller>
<controller type='virtio-serial' index='0'>
<alias name='virtio-serial0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</controller>
<interface type='bridge'>
<mac address='52:54:00:93:ba:bb'/>
<source network='ovs-sw05' portgroup='vlan-all' bridge='br-sw05'/>
<vlan trunk='yes'>
<tag id='5'/>
<tag id='513'/>
<tag id='514'/>
<tag id='515'/>
<tag id='516'/>
<tag id='517'/>
<tag id='518'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='55521f0b-3c6e-4855-8fb2-7fa265da3ac2'/>
</virtualport>
<target dev='vcoresw05'/>
<model type='virtio'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:f7:8b:a8'/>
<source bridge='br-gluonb2b'/>
<target dev='vcoreb2b'/>
<model type='virtio'/>
<alias name='net1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0c' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:3c:50:59'/>
<source network='ovs-sw02' portgroup='vlan-all' bridge='br-sw02'/>
<vlan trunk='yes'>
<tag id='5'/>
<tag id='301'/>
<tag id='303'/>
<tag id='317'/>
<tag id='318'/>
<tag id='319'/>
<tag id='320'/>
<tag id='321'/>
<tag id='322'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='959931f7-7eb8-46a9-9c8b-c100e4c9fea8'/>
</virtualport>
<target dev='vcoresw02'/>
<model type='virtio'/>
<alias name='net2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</interface>
<serial type='pty'>
<source path='/dev/pts/0'/>
<target port='0'/>
<alias name='serial0'/>
</serial>
<console type='pty' tty='/dev/pts/0'>
<source path='/dev/pts/0'/>
<target type='serial' port='0'/>
<alias name='serial0'/>
</console>
<channel type='spicevmc'>
<target type='virtio' name='com.redhat.spice.0' state='disconnected'/>
<alias name='channel0'/>
<address type='virtio-serial' controller='0' bus='0' port='1'/>
</channel>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
<graphics type='spice' port='5900' autoport='yes' listen='127.0.0.1'>
<listen type='address' address='127.0.0.1' fromConfig='1'/>
</graphics>
<sound model='ich6'>
<alias name='sound0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</sound>
<video>
<model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1'/>
<alias name='video0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<redirdev bus='usb' type='spicevmc'>
<alias name='redir0'/>
</redirdev>
<redirdev bus='usb' type='spicevmc'>
<alias name='redir1'/>
</redirdev>
<watchdog model='i6300esb' action='reset'>
<alias name='watchdog0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</watchdog>
<memballoon model='virtio'>
<alias name='balloon0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
</memballoon>
</devices>
<seclabel type='dynamic' model='apparmor' relabel='yes'>
<label>libvirt-04502792-af13-41de-9073-a777ec8eea80</label>
<imagelabel>libvirt-04502792-af13-41de-9073-a777ec8eea80</imagelabel>
</seclabel>
</domain>
ffmwu-hans-uplink
<domain type='kvm' id='15'>
<name>ffmwu-hans-uplink</name>
<uuid>d768984d-d16e-400d-9a22-273f45bd9ab2</uuid>
<memory unit='KiB'>524288</memory>
<currentMemory unit='KiB'>524288</currentMemory>
<vcpu placement='static'>1</vcpu>
<resource>
<partition>/machine</partition>
</resource>
<os>
<type arch='x86_64' machine='pc-i440fx-wily'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
<apic/>
<vmport state='off'/>
</features>
<cpu mode='custom' match='exact'>
<model fallback='allow'>Nehalem</model>
</cpu>
<clock offset='utc'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<pm>
<suspend-to-mem enabled='no'/>
<suspend-to-disk enabled='no'/>
</pm>
<devices>
<emulator>/usr/bin/kvm-spice</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/ffmwu-hans-uplink.img'/>
<backingStore/>
<target dev='vda' bus='virtio'/>
<alias name='virtio-disk0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</disk>
<controller type='usb' index='0' model='ich9-ehci1'>
<alias name='usb'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<alias name='usb'/>
<master startport='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<alias name='usb'/>
<master startport='2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci3'>
<alias name='usb'/>
<master startport='4'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
</controller>
<controller type='pci' index='0' model='pci-root'>
<alias name='pci.0'/>
</controller>
<controller type='virtio-serial' index='0'>
<alias name='virtio-serial0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</controller>
<controller type='ide' index='0'>
<alias name='ide'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
<controller type='scsi' index='0'>
<alias name='scsi0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
</controller>
<interface type='bridge'>
<mac address='52:54:00:fd:c1:33'/>
<source network='ovs-sw05' portgroup='vlan-6' bridge='br-sw05'/>
<vlan>
<tag id='6'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='789cf088-db1a-47a5-9cc9-334d1366546d'/>
</virtualport>
<target dev='vuplsw05'/>
<model type='virtio'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:f5:1e:09'/>
<source bridge='br-gluonb2b'/>
<target dev='vuplb2b'/>
<model type='virtio'/>
<alias name='net1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:54:00:e7:71:af'/>
<source network='ovs-sw01' portgroup='vlan-all' bridge='br-sw01'/>
<vlan trunk='yes'>
<tag id='4'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='5d824f23-d60c-443f-9c00-429f0bdd7943'/>
</virtualport>
<target dev='vuplsw01'/>
<model type='virtio'/>
<alias name='net2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</interface>
<serial type='pty'>
<source path='/dev/pts/2'/>
<target port='0'/>
<alias name='serial0'/>
</serial>
<console type='pty' tty='/dev/pts/2'>
<source path='/dev/pts/2'/>
<target type='serial' port='0'/>
<alias name='serial0'/>
</console>
<channel type='spicevmc'>
<target type='virtio' name='com.redhat.spice.0' state='disconnected'/>
<alias name='channel0'/>
<address type='virtio-serial' controller='0' bus='0' port='1'/>
</channel>
<input type='tablet' bus='usb'>
<alias name='input0'/>
</input>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
<graphics type='spice' port='5901' autoport='yes' listen='127.0.0.1'>
<listen type='address' address='127.0.0.1' fromConfig='1'/>
</graphics>
<sound model='ich6'>
<alias name='sound0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</sound>
<video>
<model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1'/>
<alias name='video0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<redirdev bus='usb' type='spicevmc'>
<alias name='redir0'/>
</redirdev>
<redirdev bus='usb' type='spicevmc'>
<alias name='redir1'/>
</redirdev>
<memballoon model='virtio'>
<alias name='balloon0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
</memballoon>
</devices>
<seclabel type='dynamic' model='apparmor' relabel='yes'>
<label>libvirt-d768984d-d16e-400d-9a22-273f45bd9ab2</label>
<imagelabel>libvirt-d768984d-d16e-400d-9a22-273f45bd9ab2</imagelabel>
</seclabel>
</domain>
Open vSwitch Konfiguration
Die Konfiguration der Open vSwitch Switche sieht dann wie folgt aus:
root@HanS-Server:~# ovs-vsctl show
cd407941-c84e-484c-9b7c-426050da8e74
Bridge "br-sw05"
Port "vcoresw05"
trunks: [5, 513, 514, 515, 516, 517, 518]
Interface "vcoresw05"
Port "ens1f1"
Interface "ens1f1"
Port "vuplsw05"
tag: 6
Interface "vuplsw05"
Port "br-sw05"
Interface "br-sw05"
type: internal
Bridge "br-sw02"
Port "br-sw02"
Interface "br-sw02"
type: internal
Port "vcoresw02"
trunks: [5, 301, 303, 317, 318, 319, 320, 321, 322]
Interface "vcoresw02"
Port "ens1f0"
Interface "ens1f0"
Bridge "br-sw01"
Port "vuplsw01"
trunks: [4]
Interface "vuplsw01"
Port "br-sw01"
Interface "br-sw01"
type: internal
Port "enp2s0f1"
Interface "enp2s0f1"
ovs_version: "2.5.0"
root@HanS-Server:~# ovs-vsctl list-br
br-sw01
br-sw02
br-sw05
root@HanS-Server:~# ovs-vsctl list-ifaces br-sw01
enp2s0f1
vuplsw01
root@HanS-Server:~# ovs-vsctl list-ifaces br-sw02
ens1f0
vcoresw02
root@HanS-Server:~# ovs-vsctl list-ifaces br-sw05
ens1f1
vcoresw05
vuplsw05
VM-Watchdog-Script
Wenn die VM unerwartet crasht, kann diese per Remote nicht resettet werden. Dies machen wir automatisiert mit diesem Script, das in /usr/local/bin liegt.
#!/bin/bash
count=$( ping6 -c 5 fd56:b4dc:4b1e:0:5054:ff:fedd:cc9d | grep "bytes from" | wc -l )
if [ $count -eq 0 ]
then
logger "ffmwu-hans-core: Not available -> Reset VM"
virsh reset ffmwu-hans-core || virsh start ffmwu-hans-core
exit 0
else
logger "ffmwu-hans-core: Up and running -> nothing to do"
exit 0
fi
#!/bin/bash
count=$( ping6 -c 5 fd56:b4dc:4b1e:0:5054:ff:fe1c:8661 | grep "bytes from" | wc -l )
if [ $count -eq 0 ]
then
logger "ffmwu-hans-core: Not available -> Reset VM"
virsh reset ffmwu-hans-core || virsh start ffmwu-hans-core
exit 0
else
logger "ffmwu-hans-core: Up and running -> nothing to do"
exit 0
fi
Per cronjob wird es alle 20 Minuten ausgeführt
# m h dom mon dow command
*/20 * * * * /usr/local/bin/ffmwu-hans-core.sh
*/20 * * * * /usr/local/bin/ffmwu-hans-uplink.sh
Uplink
- via Richtfunk
- 16.000 DSL Telekom
Dokumente
Flucht- & Rettungspläne
Planung
geplante Technik
- Hardwareplanung für das Projekt vom 03.03.2016
Produkt | Anzahl | Einzelpreis | Gesamt | Kommentar | Händler |
---|---|---|---|---|---|
Haupthaus | |||||
TP-Link CPE210 | 32 | 59,90 € | 1.916,80 € | Client AP | Völkner |
Ubiquiti EdgeSwitch ES-24-250W | 5 | 416,70 € | 2.083,50 € | PoE-Switch | jacob |
APC Smart-UPS 1000VA LCD RM 2U 230V | 2 | 466,60 € | 933,20 € | USV für 5 Switche + Server | jacob |
LogiLink 19" Steckdosenleiste, 8-fach mit Schalter | 2 | 22,50 € | 45,00 € | Steckdosenleiste für Serverschrank | jacob |
HP ProLiant DL380 G5 2x Xeon E5450 | 1 | 249,99 € | 249,99 € | Server | servershop24 |
HP NC364T Quad Port Gigabit Server Adapter | 2 | 49,99 € | 99,98 € | 4x Port RJ45 Netzwerkkarte | servershop24 |
HP 19" Rackmount-Schienen | 1 | 7,99 € | 7,99 € | 19" Rackmount-Schienen für Server | servershop24 |
Wandhalterung - 25cm (L) x 25cm (H) | 32 | 5,49 € | 175,68 € | Halterung für TP-Link CPE210 | varia-store |
Patchkabel | 200 | 1,99 € | 398,00 € | Patchkabel für TP-Link CPE210 | Völkner |
Kleinmaterial | 1 | 100,00 € | 100,00 € | ||
Zwischensumme | 6108,15 € | ||||
Anbau | |||||
TP-Link CPE210 | 8 | 59,90 € | 479,20 € | Client AP | Völkner |
TP-Link WR841N | 5 | 15,94 € | 79,70 € | Client Mesh | Völkner |
Wandhalterung - 25cm (L) x 25cm (H) | 8 | 5,49 € | 43,92 € | Halterung für TP-Link CPE210 | varia-store |
Zwischensumme | 602,62 € | ||||
Aufenthaltsraum | |||||
TP-Link CPE210 | 4 | 59,90 € | 239,60 € | Client AP | Völkner |
Wandhalterung - 25cm (L) x 25cm (H) | 4 | 5,49 € | 21,96 € | Halterung für TP-Link CPE210 | varia-store |
Zwischensumme | 261,56 € | ||||
Dach | |||||
NBE-5AC-19 | 4 | 99,20 € | 396,80 € | Backbone | jacob |
PBE-5AC-400 | 4 | 109,40 € | 437,60 € | Backbone | jacob |
LBE-5AC-16-120 | 1 | 89,90 € | 89,90 € | Backbone | jacob |
Zwischensumme | 924,30 € | ||||
Gesamtsumme | 7896,63 € |